SYNYQ BX17 Wireless Earbuds 5.3 Bluetooth Active Instruction Manual
- May 15, 2024
- SYNYQ
Table of Contents
SYNYQ BX17 Wireless Earbuds 5.3 Bluetooth Active
Operation Functions
- Click on the function button to play/pause
- Click on the function button to answer/end a call
- Hold the function button for 2 seconds: Call status – Reject call
- Hold the function button for 2 seconds: Power on
- Hold the function button for 5 seconds: Power off
- Hold the function button for 2 seconds to activate the voice assistant
- Click on + to increase the volume, click on – to decrease the volume
- Press and hold + for the next track, press and hold – for the previous track
Product Overview
- Product Box
- Power indicator
- Charging indicator
- LED indicator
- Microphone
- Volume + key
- Volume – key
- Power on button
- Charging Contacts
- Sounding hole
Specifications
- Normal working distance = 10M
- Accessible distance ≤ 15M
- Music playing time: 13h
- Talk time: 12h
- Charging time of the charging box: 2h
Operating instructions
- Click the headphone function button: play/pause
- Click on the function button: answer/hang up call.
- Press and hold the function button for 2 seconds: Call status: Reject call
- Press and hold the function button for 2 seconds: power on
- Press and hold the function button for 5 seconds: power off
Press and hold the function button for 2 seconds to activate the voice assistant
- R L Click “+” to increase the volume, click “-” to decrease the volume
- RL Long press “+” is the next song, long press “-” is the previous song
First time pairing use
- Take both earbuds out of the charging case at the same time, keep the left and right headphones within 5cm of each other, wait 5 seconds for the two headphones to pair then turn on your phone’s Bluetooth and click[Bx17] to pair with your phone for the first time, connect successfully and you can use it.
- If you encounter any problems with the earbuds (e.g. different volumes on the left and right earbuds, left or right ear sound out of sync, one of the headsets does not work), you can unpair the headset with your phone, and then repeat the steps to reconnect it for use.
FAQ
Frequently Asked Questions
- Q: How do I charge the device?
- A: To charge the device, place it in the charging case and connect the charging cable to a power source.
- Q: How do I check the battery status?
- A: The LED indicators on the device will show the battery status. Refer to the manual for specific indications.
- Q: Can I use the device while it is charging?
- A: Yes, you can use the device while it is charging, but it is recommended to allow it to charge fully for optimal performance.
CONTACT
Synyq
Weidevogellaan 321 2496PV ,s-Gravenhage Nederland
info@synyq.com
References
Read User Manual Online (PDF format)
Loading......