FORTIN 2024 Immobilizer Bypass Module Installation Guide
- July 4, 2024
- FORTIN
Table of Contents
- FORTIN 2024 Immobilizer Bypass Module
- Product Information
- Product Usage Instructions
- Vehicle functions supported in this diagram
- DESCRIPTION
- AUTOMATIC TRANSMISSION WIRING CONNECTION
- MANUAL TRANSMISSION WIRING CONNECTION
- PROGRAMMING PROCEDURE
- PROGRAM.: 2 VEHICLE WITHOUT EMS COM WIRE
- REMOTE STARTER FUNCTIONALITY
- Documents / Resources
FORTIN 2024 Immobilizer Bypass Module
Product Information
Specifications:
- Product: Immobilizer Bypass for Hyundai Elantra 2024
- Firmware Version: 76.[60]
- Manufacturer: Hyundai/Kia
Product Usage Instructions
Installation Requirements:
- Parts Required (Not included): 1x Fuse, 1x Relay
- Mandatory Install: Hood Pin Contact De Capot
Installation Steps:
- Ensure the vehicle is not equipped with a functional hood pin.
- Install the hood pin switch to enable hood status monitoring.
- Program the bypass option as per the provided instructions.
Connection Instructions:
- Connect various inputs and outputs as per the provided wiring diagram.
- Always connect with Data-Link for proper functionality.
Safety Notice:
- This module must be installed by a qualified technician to avoid damage to the vehicle.
- Incorrect connections can lead to permanent damage, so follow the installation guidelines carefully.
FAQ (Frequently Asked Questions)
-
Q: Can I install the Immobilizer Bypass myself?
A: It is recommended to have the unit installed by a qualified technician to avoid any potential damage to the vehicle. -
Q: What do I do if my vehicle has a functional hood pin already installed?
A: Follow the provided instructions to program the bypass option accordingly and set the function as required.
Vehicle functions supported in this diagram
Immobilizer bypass
- Lock
- Unlock
- Arm
- Disarm
- Trunk (open)
- Tachometer
- Door Status
- Parking Lights
- Trunk Status
- Hood Status*
- Hand-Brake Status
- Foot-Brake Status
- OEM Monitoring
FIRMWARE VERSION
HYUNDAI/KIA MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool, sold separately.
|
Program bypass option:| UNIT OPTION| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
Hood trigger (Output Status).
Parts required (Not included)
- 1x Fuse
- 1X relay
MANDATORY INSTALL
* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO
OFF.
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
This guide may change without notice. See
www.fortin.ca for latest version.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
MANUAL TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
Press and hold the programming button: Insert the 4-Pin (Data-Lin connector.
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
Release the programming button when the Red LED is ON.
D is not ON solid If the Red LEdisconnect the 4-PIN Data-Link harness (Black
connector) and go back to step 1.
Insert the required remaining connectors.
Press and release the programming button 6 times (6x).
- The RED LED will flash 5 times and pause.
Turn the key to the Ignition ON/RUN position.
- The Red LED will flash 10 times rapidly.
Key bypass programmed.
- The Blue LED will flash rapidly.
CAN-Bus programmed.
Turn the key to the OFF position.
- The Blue LED will turn off.
The module is now programmed.
Use the remote of the remote starter / security system to test all the
supported features and ensure all the features are properly programmed.
PROGRAM.: 2 VEHICLE WITHOUT EMS COM WIRE
Press and hold the programming button:
Connect the 4-PIN Data-link harness (Black connector).
- The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go
back to step 1.
Insert the required remaining connectors.
Turn the key to the Ignition ON/RUN position.
- The BLUE LED will flash rapidly.
Turn the key to the OFF position.
→ The BLUE LED will turn off.
The module is now programmed.
REMOTE STARTER FUNCTIONALITY
- All doors must be closed.
- Remote start the vehicle.
- Unlock the doors with the remote-starter remote or the OEM remote.
- Insert and Turn the key to the Ignition ON/RUN position.
- Press the brake pedal.
- The vehicle can mnow be put in to gear and driven.
Module label
Notice: Updated Firmware and Installation Guides Updated fi rmware and
installation guides are posted on our web site on a regular basis. We
recommend that you update this module to the latest fi rmware and download the
latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT
PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Documents / Resources
|
FORTIN 2024 Immobilizer Bypass
Module
[pdf] Installation Guide
2024, 2024 Immobilizer Bypass Module, Immobilizer Bypass Module, Bypass
Module, Module
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>