NSL 120V eStrip Professional And Home Use Installation Guide

NSL 120V eStrip Professional And Home Use

Product Information

Specifications

• Voltage: 120V
• Certification: cETLUs
• Max. Run Length: 164 Ft/Roll
• High CRI: 90+
• Minimum Section Length: 4 Inches
• IP Rating: IP65
• Power Factor: > 0.94
• Operation Mode: Constant current
• Warranty: 5 years

Product Usage Instructions

1. Installation: The 120V AC LED eStrip is designed for accent lighting in various settings. Ensure the power source is turned off before installation. The strip can be easily installed without the need for an additional driver.
2. Indoor/Outdoor Use: This eStrip can be used both indoors and outdoors, thanks to its IP65 rating. However, ensure proper weatherproofing for outdoor installations.
3. Maximum Length: The maximum run length of the strip is 164 Ft/Roll. Do not exceed this limit to prevent performance issues.
4. Maintenance: Regularly clean the strip using a soft, dry cloth to maintain optimal performance.

FAQ

1. Q: Can the eStrip be cut to a shorter length?
   A: Yes, the eStrip can be cut to a minimum section length of 4 inches. Follow the cutting instructions provided in the manual.

2. Q: What is the color temperature of the ES-120V-27K-164FT model?
   A: The color temperature of this model is 2700K, providing a warm light output suitable for various applications.

An ideal solution for accent lighting in residential, commercial and retail applications, the 120V AC LED eStrip can be easily installed without the need of any additional driver, in indoor and outdoor applications.

• cETLUs certified
• Max. run length: 164 Ft/Roll
• High CRI: 90+
• Minimum section: 4 Inches
• IP65 rating
• Power factor: > 0.94
• Constant current
• Warranty: 5 years

Key Features

• High light efficiency, high PF and high lumens.
• Constant current design, overvoltage protection.
• Drop current when over temperature to protect product(Max. ambient working temperature:55℃, light up for no more than 6 hours)
• Dimmable:TRIAC.
• Do not need transformer box to change AC to DC, connect with line voltage directly.
• Complete and colorful accessories for options.
• IP65 PVC extrusion process, Min.section 4 inch, Max.run 164FT.
• With bared power cords on one side, it’s more convenient for connecting.
• ETL certified 5 years warranty indoor use,3 years warranty outdoor use.
• Ambient Working Temperature: -20 ~ 42℃ (-4 ~ 107℉)
• Ambient Installation Temperature: 0 ~ 42 ℃(32 ~ 107℉)
• Storage Temperature: -20 ~ 60℃(-4 ~140℉)

Key Specifications (for more specs, please refer the product catalogue)

| Color Temperature| LM/Ft| Power/Ft| Light Efficiency| CRI| Length| Forward Current| Minimum Section
---|---|---|---|---|---|---|---|---
ES-120V-27K-164FT| 2700K| 280LM| <4W| 70LM/W| 90+| 164Ft| 36mA/Ft| 4 Inches
ES-120V-30K-164FT| 3000K| 300LM| <4W| 75LM/W| 90+| 164Ft| 36mA/Ft| 4 Inches
ES-120V-40K-164FT| 4000K| 340LM| <4W| 85LM/W| 90+| 164Ft| 36mA/Ft| 4 Inches

Drawing

Luminous intensity distribution diagram

Accessories

• ES-120V-EC
  End cap
  (Indoor & Outdoor)

• ES-120V-EXT
  4Ft aluminum extrusion

• ES-120V-MC
  Mounting clips (Bag of 10)

• ES-120V-PC
  8Ft power cord

• ES-120V-PC-PL
  5Ft power cord with plug

• ES-120V-JC-1FT
  Jumper, 1Ft
  ES-120V-JC-3FT
  Jumper, 3Ft
  ES-120V-JC-6FT
  Jumper, 6Ft
  ES-120V-JC-6IN
  Jumper, 6’’

Attention

Prohibitions

• Don’t install in spraying environment.
• Don’t install under water.
• Don’t install in high corrosive environment.
• Don’t install in high temperature and humidity environment.
• Don’t install at sea water splashing area.
• Don’t use any chemical glue to the back of the tape light for installation.
• Please use physical installation: mounting clips or channels.

Points to keep in mind

• The ambient working temperature is -20 ~ 40 C (Drop current when over temperature to max. ambient working temperature: 55°C , light up for no more than 6 hours).
• Bending, twisting and trampling are prohibited in low temperature below 0°C (PVC is brittle in low temperature below 0°C).
• Do not puncture, cut, shorten, or splice the flexible lighting.
• If you must cut the product, you need to do a professional protective for out line ends and cutting ends.

Ordering Code(s)
164Ft spools: ES-120V-27K-164FT, ES-120V-30K-164FT, ES-120V-40K-164FT
Custom fit: ES – 120V – YY – XX

Project| | Type|
---|---|---|---
Date| | Contact|
Notes|

800.527.4358
Email: nslsales@nslusa.com
www.nslusa.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>