Energizer 48378 Magnet Mount LED Light Bar User Manual
- June 6, 2024
- Energizer
Table of Contents
Magnet Mount LED Light Bar
BATTERY INSTALLATION
-
Slide off the narrow battery compartment cover.
Read instructions or watch the easy-to-follow videos. Scan QR code or visit https://byjasco.com/48378i -
Insert 3 AA batteries (not included), noting polarity
-
Replace compartment cover. Important: Different types of batteries or new and used batteries should not be mixed. Exhausted batteries should be removed from the fixture and disposed of properly.
SURFACE MOUNTING
- Clean the mounting surface of any dust or debris.
- Peel the paper backing from the metal strip and press it firmly onto the surface.
- Place the magnetized back of the light bar onto the mounted metal strip.
Note: You can mount the light to other metallic surfaces without using the metal strip.
OPERATION
ON/OFF Switch; Manually turn the light ON or OFF and activate the light bars connection with the IR remote.
MADE IN CHINA/HECHO EN CHINA
CAUTION
- BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY OR PRODUCT DAMAGE
- DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES
- REPLACE ALL BATTERIES AT THE SAME TIME
- REMOVE BATTERIES IF THE PRODUCT IS TO BE UNUSED FOR AN EXTENDED PERIOD OF TIME
©2021 Energizer. Energizer and certain graphic designs are trademarks of
Energizer Brands.
LLC and related subsidiaries and are used under license by Jasco Products
Company, LLC.
Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7 AM-8 PM, M-F,
Central Time.
90-day warranty. Visit www.byjasco.com for warranty
details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>