Nedis ACMB1WT7 Mobile Air Conditioner User Manual

June 5, 2024
nedis

ACMB1WT7 Mobile Air Conditioner

Nedis ACMB1WT7 Mobile Air Conditioner

User Manual

Preface

 Thank you for purchasing the Nedis ACMB1WT7.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis ACMB1WT7 is a mobile air conditioner used for cooling and dehumidifying rooms.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.

The product is intended for indoor use only.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Mobile Air Conditioner

---|---

Article number

|

ACMB1WT7

Dimensions

|

320 x 370 x 730 mm

Weight

|

21 kg

Input voltage

|

220 – 240 VAC ; 50 / 60 Hz

Required power

|

792 W

Energy class

|

A

Energy efficiency ratio (EER)

|

2.6

Noise level

|

≤ 65 dB

Cooling capacity

|

7000 BTU

Room size capacity *

|

60 m3

Air circulation

|

300 m3/h

Dehumidification

|

20 l/day

Refrigerant

|

R290 / 130 g

Power plug

|

Schuko CEE 7/7

  • The performance of the air conditioner is subjected to many factors like floor space, ceiling height, level of isolation and number of windows. The data mentioned is based on a space with low heat loads.
Main parts (image A)

A

1. Control panel


2. Swing louvers

3. Handle

4. Exhaust nozzle

5. Exhaust hose

6. Window kit

7. Window kit adjustment screws

8. Continuous drainage outlet

9. Air outlet

10. Manual drainage outlet

11. Power cable

12. Exhaust hose connector

13. Remote control

14. Exhaust nozzle screw

Safety instructions

WARNING

|

Contains one or more (extremely/highly) flammable components.

---|---

|

Contains one or more (extremely/highly) flammable components.

---|---

  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.

  • Only use the product as described in this document.

  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.

  • Do not drop the product and avoid bumping.

  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

  • Do not expose the product to water or moisture.

  • If the product is immersed in water, do not touch the product or the water.

  • After the product has been immersed or covered in water or other liquids, do not use the product again.

  • Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.

  • The appliance shall be installed in accordance with national wiring.
    Connect to a grounded socket only.

  • If necessary, use an earthed extension cable of a suitable diameter.

  • Fully extend the power cord and make sure the power cord does not contact the product.

  • When using an extension cord, use one which is as short as possible and fully extended.

  • Do not use external timers or remote control systems to switch the product on or off.

  • Ensure people do not trip over the cord.

  • Make sure that the power cable cannot become entangled and does not hang over the edge of a worktop.

  • Do not leave the product unattended when switched on.

  • Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.

  • Place the product in an area without any continuous sources of ignition (for example: open flames, gas or electrical appliances in operation).

  • Only install, operate and store the product in a room with a floor area above 7 m2.

  • Switch off the main power switch before unplugging the power cord.

  • Disconnect the product from the power source before service and when replacing parts.

  • Disconnect the product from the power outlet and other equipment if problems occur.

  • Always disconnect the product from the power outlet when cleaning or moving the product.

  • Do not pull the power cable to move the product.

  • Shut off the main power grid and carefully remove the plug from the power outlet.

  • Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.

  • Do not insert any objects into the product.

  • Do not obstruct or cover the product’s air inlet or outlet grid.

  • R290 is a refrigerant gas that complies with the European directives on the environment.

  • Be aware that refrigerants can be odorless.

  • Store the product in such a way as to prevent mechanical failure.

  • Only store the product in a well-ventilated area.

  • When the product is installed, operated or stored in a non-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.

  • Only persons with a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification, can work on or break into a refrigerant circuit.

  • Servicing can only be performed as recommended by the equipment manufacturer.

  • Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of the person competent in the use of flammable refrigerants.

  • When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.

  • Do not puncture or heat any part of the refrigerant circuit.

  Explanation of the safety symbols on the product

|

Contains one or more (extremely/highly) flammable components.

---|---

Installation

  • Check the contents of the package
  • Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installing the product
  • Place the product on a flat, level surface on the floor.
  • Only move the product in an upright position.
  • Leave a minimum of 0.5 m space around the air inlet and outlet to allow a good circulation of airflow.
  • If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
  • Only install, operate and store the product in a room with a floor area above 7 m2.
  • Keep the product at a distance from flammable objects such as furniture, curtains and similar.
  • Do not block ventilation openings and make sure that there is enough space around the product.
Assembling the exhaust (image B)

B

  • Do not block the exhaust hose, this may cause overheating.
  • Only use the provided exhaust hose.

1. Assemble the window kit  A 6 the fasteners  A 7.

2. Install  A 6 in the window opening.

3. Tighten  A 7.

4. Assemble the exhaust hose  A 5, the exhaust nozzle  A 4 and the exhaust hose connector  A12.

5. Connect  A12  the air outlet  A 9.

6. Extend  A 5 up to 1500 mm.

  • Do not twist the exhaust hose.
  • Ensure that the exhaust hose does not kink.

7. Snap  A 4 into  A 6 and fasten with the exhaust nozzle screw A14.

Assembling the continuous drainage (optional)

1. Open the continuous drainage outlet  A 8.

2. Connect  A 8 to a water container or drainage system (not included).

Use

Using the control panel (image C)

C

Button

|

Function

---|---

C 1

|

Display

C 2

|

Press timer  C 2 and use  C 3 and  C 4 to set the duration of cooling.

C 3

|

Increase values.

C 4

|

Decrease values.

C 5

|

Switch on fan mode.

C 6

|

Repeatedly press the button to select the mode: Cooling mode / Dehumidifying mode / Fan mode.

C 7

|

Temperature indicator

C 8

|

Switch the product on or off.

Using the remote control (image D)

D

Button

|

Function

---|---

D 1

|

Increase values.

D 2

|

Switch fan speed.

D 3

|

Decrease values.

D 4

|

Activate sleep mode. Only works in cooling mode. After one hour the set temperature increases 1 °C and again after 2 hours.

D 5

|

Switch operating mode.

D 6

|

Activate timer mode.

D 7

|

Switch the product on or off.

Manual drainage

1. Switch off the product using  C 8

2. Unplug  A11.

3. Place a water container underneath  A10.

4. Unscrew the manual drainage cap.

5. Remove the water plug.

6. Slightly tilt the product backwards to ensure all water leaves the reservoir.

7. Put back the plug and screw the drainage cap back on.

Maintenance

  Cleaning the product (image E)

E

Clean the product regularly as follows:

  • Switch off and unplug the product when not in use or before maintenance.
  • Allow the product to cool down.
  • Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
  • Do not clean the inside of the product.
  • Clean the outside of the product with a soft, clean, lightly damp cloth.
  • Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.

Store the product as follows:

1. Drain the product.

2. Press  C 8 to switch on the product.

3. Press  C 5 followed by  C 5 to switch to low fan speed operation.

4. Wait until  A10  is dry.

5. Switch off the product.

6. Unplug the product.

7. Remove the batteries from  A13  during long periods of disuse to avoid possible leakage.

8. Store the product in a dry place away from sunlight and protect it against excessive dust and dirt.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals