SHOWVEN CO2 JET X-C1 Battery Powered Truly Wireless Sparkular User Manual

SHOWVEN CO2 JET X-C1 Battery Powered Truly Wireless

Specifications:

• Consumable: Liquid CO2
• Output Distance: Up to 8-10m
• Control: DMX and direct on-off control
• Nozzle Material: Aluminum
• Weight: Lightweight and compact

Product Usage Instructions

• Safety Considerations:
  Unauthorized repairs are prohibited. Please read the manual and warnings before operation.

• Product Overview:
  The CO2 JET X-C1 is a stage effect machine with a durable aluminum nozzle. It features both DMX and direct control options for versatile applications.

• Operation Panel:
  Use the MENU button to switch settings and adjust parameters with the +/- buttons.

• Interface:
  The interface displays manufacturer information, product model, version number, and DMX channel status.

Operation :

1. Place the CO2 JET on a horizontal surface.
2. Adjust the output pipe angle using the angle knob and lock it in place.
3. Connect the power cable and switch the DMX/POWER button to ON.

Upside-down Installation & Usage Method:

1. Use the provided M10 holes for upside-down installations.
2. To prevent condensation, place absorbent cotton around the output pipe’s outer ring.

Maintenance:

• Clean air inlets and outlets regularly to prevent clogging.
• Replace the CO2 hose after 1 year of use.
• Clean the filter at the CO2 cylinder connection every two months.

Frequently Asked Questions (FAQ):

• Q: Can I use any type of CO2 with this machine?
  A: The machine is designed for use with liquid CO2.

• Q: What is the maximum distance this machine can shoot CO2?
  A: The machine can blow clouds of CO2 up to 8-10m.

USER MANUAL
CO2 JET X-C1
V1.0
2024/04/09

Showven Technologies Co., Ltd.

Thanks for choosing SHOWVEN CO2 JET X-C1, we wish it will bring you lots of exciting moments. Please read the following manual carefully before operating this product.

 SAFETY CONSIDERATIONS

•  Unauthorized repair are prohibited, it may cause serious incident
• Please read the following manual and warnings printed on device carefully before operating this product, and operate it strictly in accordance with the operating instructions.
• Make sure power supply in consistent with the rated voltage of the equipment, and the socket must well grounded.
• Make sure that children, unauthorised people and animals do not obtain access to the CO2 Jet. Only use the CO2 Jet if there are no people, animals or other objects in the direction of the output within the output distance.
• Make sure no one can access to the CO2 JET output pipe as long as CO2 JET connect with hose and CO2 tank valve was open.
•  Remove the remaining CO2 pressure in the hose by firing one more time after close the valve of CO2 tank before disassemble the hose.
• Use CO2 JET only in well-ventilated space.

Description
CO2 JET is a CO2 effect machine specially designed for the stage. It is a compact, lightweight, while no need of external bottom plate for firing. The nozzle is made of aluminum material, which makes the machine more durablee. Built in both DMX and direct on-off control makes it versatile for different application situations and it blows clouds of CO2 up to 8-10m.

Technical Specifications

• Model: X-C1
• Input: AC110V/AC220V,50-60Hz
• Fuse: 6.3A/240V
• Work Power: 24W
• Dimension: 285 192 192mm
• Weight: 5kg
• Power Connectors: Neutrik® power CON TRUE1 (in & out) \ Color LCD: Yes
• Control: DMX, Direct on-off voltage control
• Interface: XLR IN/OUT
• Output Angle: 0~180 degree (13 options)
• Connector: DNP 3/8” quick coupler
• Pressure: 60bar/870.22Psi
• Max Output Height: 10m

Product Overview

1. Top Panel
2. Rear Panel Power / DMX
3. Switch Button
4. Fuse
5. POWER IN/OUT
6. CO2 Input
7. DMX IN/OUT
8. Output Pipe
9. Angle Block Board
10. Operating Button
11. LCD Screen
12. Angle Knob
13. Rubber Foot

Operation Panel

MENU: Switch between different setting menu

• +: Parameters up and save
• -: Parameters down and save

Interface

• First line : Manufacturer
• Second line : Product model and version number

DMX channel

• DMX: DMX Address.
• DMX CONNECTED: Blue background and white font;
• NO DMX: Black background and white font.
• SAFE: Safety channel address. Blue background and black font means DMX connected and safety channel is activated.
• Notice:
• When DMX is connected, “DMX_Connection” is displayed

Main menu settings:
Short press the MENU button to enter the main menu, and then press the MENU to switch pages to enter different items:

• 76-120/
• 102-153/
• 127-178/
• 153-204/
• 178-229

| 102-153| The value range of the safety channel when the equipment is in the activated state
Manual Work| ON/OFF| OFF| Manually open the valve

DMX control:

value, the device is active.

Operation

1. Place the CO2 JET on a horizontal firm surface.
2. Set the output pipe to desired angle by pull the angle knob. Shake the output pipe to make sure the angle knob is locked by angle block board.
3. Connect a power cable to the power input, switch the DMX/POWER switch button to POWER control mode. Check if you can hear a click sound of valve open when power is ON, if so means the machine is working correctly.
4. Switch the DMX/POWER switch button to the desired firing control mode (POWER or DMX).
5. Connect a DMX cable, set DMX address and safety address for each unit of machine (if use DMX control), ignore this step if use POWER control.
6. Connect the CO2 hose to CO2 cylinder, tightened with a wrench, otherwise it may result in air leakage.
7. Connect the CO2 hose to CO2 JET CO2 IN quick coupler.
8. Open the valve of CO2 tank gradually and listen carefully to check whether there is air leakage sound, if so please turn off the valve, find out the leakage area and reconnect.
9. Check the amount of CO2 remains in the CO2 cylinder by check pressure gauge value, normally it should between 5-7Mpa, if pressure is low means there is not enough CO2 inside.
10. Check the safety distance of each machine, make sure the output direction of each CO2 JET is free from persons, animals and objects.
11. Fire.
12. After each show, please close the CO2 cylinder valve, firing CO2 JET to empty the remaining CO2 in the hose to release the pressure.
13. Power OFF CO2 JET. Disconnect the CO2 hose from CO2 quick coupler on machine. Be care of the low temp. when close to CO2 JET.
14. Disconnect the CO2 hose from CO2 cylinder.

Upside-down Installation & Usage Method

1.  There are two M10 hole at the bottom panel for upside down installations for CO2 JET.
2. Condensation may occur upside down installation. We recommend installing a piece of absorbent cotton around the outer ring of the output pipe.

Maintenance

• When not use the machine, clean each air inlet and outlet regularly to prevent clogging with sand and dust and to prolong service life.
• The maximum service life of CO2 hose is 1 year, after 1 year it needs to be replaced with a new one.
• The filter at the connection of the CO2 cylinder or the quick coupler on the machine should  be disassembled with a wrench for cleaning if it has been used for about two months and then reassembled as it after cleaning.

Warranty Instructions

• Sincere thanks for your choosing our products, you will receive quality service from us
• The product warranty period is one year. If there are any quality problems within 7 days after  shipping out from our factory, we can exchange a brand new same model machine for you.
• We will offer free of charge maintenance service for machines which with hardware malfunction (except for the instrument damage caused by human factors) in warranty period.
• Please don’t repair machine without factory permission
• Below situations NOT included in warranty service:
• Damage caused by use other type of consumable which is not from SHOWVEN® or SHOWVEN® authorized distributor.
• Damage caused by improper transportation, usage, management, and maintenance, or damage caused by human factors;
• Disassemble, modify or repair products without permission;
• Damage caused by external reasons (lightning strike, power supply etc.)
• Damage caused by improper installation or use;
• For product damage not included in warranty range, we can provide paid service.
• Invoice is necessary when applying for maintenance service from SHOWVEN®.
• Showven Technologies Co., Ltd.
• Tel: +86-731-83833068
• Web: www.showven.cn
• E-mail: info@showven.cn
• Add: No.1 Tengda Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, 410300, P.R.China

References

• Founder of Sparkular, Sparkular Machine Maker | Showven

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>