Silkland S1501 Mini DP to DP 1.2 Cable User Manual
- June 29, 2024
- Silkland
Table of Contents
Silkland S1501 Mini DP to DP 1.2 Cable
Specifications
- Name: Mini DP to DP 1.2 Cable
- Input: Mini DisplayPort
- Output: DisplayPort
- Resolution: 4K@60Hz, 2K@165Hz
- Attention: Not Compatible with HDMI/USB C
Product Usage Instructions
Connection:
Connect one end of the Mini DP to DP 1.2 Cable to the Mini DisplayPort on your device and the other end to the DisplayPort input on your monitor or display.
Resolution Settings:
Ensure that your device supports the resolutions of 4K@60Hz or 2K@165Hz for optimal performance. Adjust the display settings on your device accordingly.
Compatibility:
Be aware that this cable is not compatible with HDMI or USB C connections. Make sure to use it only with devices that have Mini DisplayPort and DisplayPort interfaces.
FAQ
Is the Mini DP to DP 1.2 Cable compatible with HDMI or USB C devices?
No, this cable is specifically designed for Mini DisplayPort to DisplayPort connections and is not compatible with HDMI or USB C devices.
What are the recommended resolutions for this cable?
The cable supports resolutions up to 4K@60Hz and 2K@165Hz for high-quality display output.
Which models are associated with this cable?
The cable is associated with models S1501 and S1502.
For user manual, FAQS and more information, please visit： https://silklandtech.com/pages/support Or scan the QR code below:
2-Year Warranty
- [email protected]
- www.silklandtech.com
- @silkland_official
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
The Waste Electrical and Electronic Equipment (WEEE) Directive Statement
Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: 2014/30/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at
the following internet address
https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St.,
Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: [email protected]
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: The Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.silklandtech.com
The following importer is the responsible party
(for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool, L3 5TX, UK
E-Mail: [email protected]