Silkland S1503 Mini DP to DP 1.4 Cable User Manual

June 29, 2024
Silkland

Silkland S1503 Mini DP to DP 1.4 Cable

Silkland-S1503-Mini-DP-to-DP-1.4-Cable-product

Specifications

  • Name: Mini DP to DP 1.4 Cable
  • Input: Mini DisplayPort
  • Output: DisplayPort
  • Resolution: 8K@60Hz, 4K@144Hz
  • Attention: Not Compatible with HDMI/USB C

Product Usage Instructions

Connection

  1. Insert the Mini DisplayPort end of the cable into the Mini DisplayPort output on your device.
  2. Connect the DisplayPort end of the cable to the DisplayPort input on your monitor or display.

Resolution Settings

Ensure that your device and monitor support the desired resolution (8K@60Hz or 4K@144Hz) before connecting the cable.

Compatibility

This cable is specifically designed for Mini DisplayPort to DisplayPort connections and is not compatible with HDMI or USB C interfaces.

FAQ

Where can I find the user manual and more information about the product?

You can visit our support page at https://silklandtech.com/pages/support for the user manual, FAQs, and additional information.

What models is this cable associated with?

This cable is associated with models S1503, S1504, and S1505.

What should I do with the product at the end of its life cycle?

This product should not be treated as household waste. Please hand it over to the applicable collection point for the recycling of electrical and electronic equipment in accordance with regulations.

For user manual, FAQS and more information, please visit: https://silklandtech.com/pages/support Or scan the QR code below:

2-Year Warranty

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.

Notes: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

The Waste Electrical and Electronic Equipment (WEEE) Directive Statement

Declaration of Conformity

Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this equipment is in compliance with the following Directives: 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address
https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St., Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com

Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.)  declares that this equipment is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the following internet address: https://www.silklandtech.com
The following importer is the responsible party
(for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool, L3 5TX, UK
E-Mail: info@wsj-product.com

www.quefairedemesdechets.fr

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals