Silkland S140 Series USB C to Display Port 1.4 Cable User Manual
- June 29, 2024
- Silkland
Table of Contents
Silkland S140 Series USB C to Display Port 1.4 Cable
Product Information
Specifications
- Name: USB C to DisplayPort 1.4 Cable
- Input: USB C
- Output: DisplayPort
- Resolution: 8K@60Hz, 4K@144Hz
- Associated Models: S1403, S1404, S1405, S1406, S1407, S1408
Product Usage Instructions
Connection Steps
- Ensure your source device has a USB C port.
- Connect one end of the USB C to DisplayPort cable to the USB C port on your device.
- Connect the other end of the cable to the DisplayPort input on your monitor or display.
- Ensure both devices are powered on.
Resolution Settings
For optimal performance, set your display settings to match the supported
resolutions of the cable (8K@60Hz or 4K@144Hz).
Compatibility:
This cable is not compatible with HDMI or Lightning ports. Please ensure
your devices have USB C and DisplayPort interfaces.
FAQ
-
Q: Are there any specific devices this cable is not compatible with?
A: This cable is not compatible with devices that have HDMI or Lightning ports. -
Q: What are the supported resolutions for this cable?
A: The cable supports resolutions up to 8K@60Hz and 4K@144Hz. -
Q: Where can I find the user manual and further support?
A: For the user manual, FAQs, and additional information, please visit https://silklandtech.com/pages/support.
USB C to DisplayPort 1.4 Cable
User Manual
Specifications
- Name: USB C to DisplayPort 1.4 Cable
- Input: USB C
- Output: DisplayPort
- Resolution: 8K@60Hz, 4K@144Hz
- Attention: Not Compatible with HDMI/Lightning
For user manual, FAQS and more information, please visit:
https://silklandtech.com/pages/support
Or scan the QR code below:
Customer Service
2-Year Warranty
- support@silklandtech.com
- www.silklandtech.com
- @silkland_official
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
The Waste Electrical and Electronic Equipment (WEEE) Directive Statement
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: 2014/30/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at
the following internet address https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St.,
Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com
GB Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: The Restriction of
the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 &
Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.silklandtech.com
The following importer is the responsible party (for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool,
L3 5TX, UK
E-Mail: info@wsj-product.com