Silkland S2404 8K Mini HDMI to HDMI Cable User Guide
- June 29, 2024
- Silkland
Table of Contents
Silkland S2404 8K Mini HDMI to HDMI Cable
Specifications
- Name: 8K Mini HDMI to HDMI Cable
- Input: Mini HDMI
- Output: HDMI
- Resolution: 8K@60Hz, 4K@144Hz
- Attention: Not Compatible with DisplayPort/USB C
Product Usage Instructions
Connecting the Cable:
- Locate the Mini HDMI port on your device.
- Insert the Mini HDMI end of the cable into the device’s Mini HDMI port.
- Connect the HDMI end of the cable to your display or TV’s HDMI port.
Selecting Resolution:
To achieve the desired resolution (8K@60Hz or 4K@144Hz), ensure that your source device and display support the respective resolution settings. Adjust the resolution settings on your device if necessary.
Compatibility:
Ensure that your devices are compatible with Mini HDMI and HDMI ports. This cable is not compatible with DisplayPort or USB C connections.
FAQ
Q: Which models is this cable associated with?
A: This cable is associated with models S2404, S2405, S2406, S2407, S2408, S2409, S2410.
Q: Where can I find the user manual and more information?
A: For the user manual, FAQs, and additional information, please visit https://silklandtech.com/pages/support.
For user manual, FAQS and more information, please visit： https://silklandtech.com/pages/support Or scan the QR code below:
2-Year Warranty
- support@silklandtech.com
- www.silklandtech.com
- @silkland_official
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
The Waste Electrical and Electronic Equipment (WEEE) Directive Statement
Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: 2014/30/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at
the following internet address
https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St.,
Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: The Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.silklandtech.com
The following importer is the responsible party
(for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool, L3 5TX, UK
E-Mail: info@wsj-product.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>