Silkland S2504 USB C to HDMI 2.0 Adapter User Manual

June 29, 2024
Silkland

Silkland S2504 USB C to HDMI 2.0 Adapter

Product Information

Specifications

  • Name : USB C to HDMI 2.0 Adapter
  • Input : USB C
  • Output : HDMI
  • Resolution : 4K@60Hz, 2K@144Hz
  • Attention : Not Compatible with DP/Lightning

Product Usage Instructions

Connection

  1. Connect the USB C end of the adapter to the USB C port on your device.
  2. Connect an HDMI cable (not included) to the HDMI port of the adapter.
  3. Connect the other end of the HDMI cable to your display device (e.g., TV, monitor).

Usage

  • Make sure your device supports USB C and HDMI output.
  • Select the correct HDMI input on your display device.
  • Your device should automatically detect and configure the resolution based on the adapter’s capabilities.

FAQ

  • Q: What are the compatible models for this adapter?

    • A: The adapter is associated with Models S2504 and S2505.
  • Q: What is the resolution supported by this adapter?

    • A: The adapter supports a maximum resolution of 4K at 60Hz and 2K at 144Hz.
  • Q: Is this adapter compatible with devices using DP or Lightning ports?

    • A: No, this adapter is not compatible with DP (DisplayPort) or Lightning ports.

USB C to HDMI 2.0 Adapter
User Manual | Benutzerhandbuch Manuel de l’Utilisateur | Manuale d’uso Manual de usuario | ユーザーマニュアル

Specifications

  • Name : USB C to HDMI 2.0 Adapter
  • Input : USB C
  • Ouput : HDMI
  • Resolution : 4K@60Hz, 2K@144Hz
  • Attention : Not Compatible with DP/Lightning

Associated with Models

S2504, S2505

For user manual, FAQS and more information, please visit: https://silklandtech.com/pages/support

Or scan the QR code below:

Customer Service
Service Clients

2-Year Warranty

support@silklandtech.com
www.silklandtech.com
@silkland_official

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

The Waste Electrical and Electronic Equipment (WEEE) Directive Statement
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this equipment is in compliance with the following Directives: 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St., Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com

GB Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.)  declares that this equipment is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the following internet address: https://www.silklandtech.com
The following importer is the responsible party
(for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool,
L3 5TX, UK
E-Mail: info@wsj-product.com

www.quefairedemesdechets.fr 

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals