Silkland S310 Series USB C to USB C 2.0 Cable 60W User Manual
- June 29, 2024
- Silkland
Table of Contents
Silkland S310 Series USB C to USB C 2.0 Cable 60W
Specifications
- Name: USB C to USB C 2.0 Cable
- USB C Output: 60W, 20V/3A
- Data Transfer: 480Mbps
- Compatibility: USB C Ports Devices
- Attention: Not Compatible with USB A/Lightning
Product Usage Instructions
Compatibility
Ensure that the devices you intend to connect with the USB C to USB C 2.0
Cable have USB C ports. This cable is not compatible with USB A or Lightning
ports.
Power Output
When using the cable for charging, make sure the power source can deliver
up to 60W (20V/3A) to ensure optimal charging speed.
Data Transfer
To transfer data between two USB C devices, connect both ends of the cable
securely. The data transfer speed supported is up to 480Mbps.
Handling
Avoid bending or twisting the cable excessively to prevent damage to the
internal wires. Store the cable in a safe place when not in use.
FAQ
-
Q: What devices are compatible with the USB C to USB C 2.0 Cable?
A: The cable is compatible with devices that have USB C ports. It is associated with models S3101 to S3135. -
Q: What is the power output of the USB C to USB C 2.0 Cable?
A: The cable supports a power output of 60W (20V/3A). -
Q: What should I do if my device is not recognizing the cable?
A: Make sure both ends of the cable are securely connected to the devices. Try using a different USB C port on your device or a different device altogether to isolate the issue.
USB C to USB C 2.0 Cable 60W
User Manual
Specifications
- Name: USB C to USB C 2.0 Cable
- USB C Ouput: 60W, 20V/3A
- Date Transfer: 480Mbps
- Compatibility: USB C Ports Devices
- Attention : Not Compatible with USB A/Lightning
For user manual, FAQS and more information, please visit：
https://silklandtech.com/pages/support
Or scan the QR code below:
Customer Service
2-Year Warranty
- support@silklandtech.com
- www.silklandtech.com
- @silkland_official
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
The Waste Electrical and Electronic Equipment (WEEE) Directive Statement
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: 2014/30/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at
the following internet address https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St.,
Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com
GB Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: The Restriction of
the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 &
Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.silklandtech.com
The following importer is the responsible party
(for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool,
L3 5TX, UK
E-Mail: info@wsj-product.com
Points de collecte sur www.quefairedemesdechets.fr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>