Silkland S362 Series USB4 Adapter Right Angle User Manual
- June 29, 2024
- Silkland
Table of Contents
Silkland S362 Series USB4 Adapter Right Angle
Specifications
- Name: USB4 Adapter Right Angle
- USB C Output: Up to 240W, 48V/5A
- Video Display: Up to 8K@60Hz, 4K@120Hz
- Data Transfer: Up to 40Gbps
- Compatibility: USB C Ports Devices
Product Usage Instructions
Overview
The USB4 Adapter Right Angle is designed to provide high-power output,
high-resolution video display, and fast data transfer capabilities for USB C
devices.
Compatibility
Ensure that your device has a USB C port and is compatible with power
delivery of up to 240W, video display of up to 8K@60Hz or 4K@120Hz, and data
transfer speeds of up to 40Gbps.
Connection
- Connect the USB4 Adapter Right Angle to your device’s USB C port.
- Ensure a secure connection to enable power delivery and data transfer.
Power Delivery
For devices requiring power delivery, make sure the adapter is capable of
providing up to 240W with an output of 48V/5A.
Video Display
To enjoy high-resolution video display, connect the adapter to a compatible
monitor or display supporting resolutions of up to 8K@60Hz or 4K@120Hz.
Data Transfer:
Utilize the adapter for fast data transfer speeds of up to 40Gbps between
your USB C devices.
FAQ
For more information, user manual, and FAQs, please visi Silkland Tech
Support Page.
USB4 Adapter Right Angle
User Manual
Specifications
- Name: USB4 Adapter Right Angle
- USB C Ouput: UP to 240W, 48V/5A
- Video Display: Up to 8K@60Hz, 4K@120Hz
- Date Transfer: Up to 40Gbps
- Compatibility: USB C Ports Devices
- Attention: Not Compatible with USB A/Lightning
For user manual, FAQS and more information, please visit: https://silklandtech.com/pages/support Or scan the QR code below:
Customer Service
2-Year Warranty
- support@silklandtech.com
- www.silklandtech.com
- @silkland_official
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.
Notes : This equipment has been tested and found to comply with the
limits for a Class B digital device. pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
The Waste Electrical and Electronic Equipment (WEEE) Directive Statement
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: 2014/30/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at
the following internet address
https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St.,
Shenzhen 518000, China
The following importer is the responsible party (for EU matters only): WSJ
Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com
GB Declaration of Conformity
Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this
equipment is in compliance with the following Directives: The Restriction of
the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 &
Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.silklandtech.com
The following importer is the responsible party (for UK matters only):
WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool,
L3 5TX, UK
E-Mail: info@wsj-product.com
Points de collecte sur www.quefairedemesdechets.fr