Yealink BT51A, BT51C Bluetooth USB Dongle User Guide
- June 28, 2024
- Yealink
Table of Contents
BT51A, BT51C Bluetooth USB Dongle
“`html
Specifications:
-
Product Name: Bluetooth USB Dongle
-
Models Available: BT51A, BT51C
-
Compliance: FCC Part 15, ISED Canada licence-exempt RSS
standard(s) -
Manufacturer: Yealink Network Technology Co.,Ltd
-
Country of Origin: Made in China
Product Usage Instructions:
Pairing with PC/Deskphone:
- Turn on the Bluetooth headset:
-
For BH72/76: Follow the specific instructions for your headset
model. -
For BH71: Slide and hold the switch for 3 seconds to enter
Bluetooth pairing mode. -
Connect the BT51A/BT51C to the USB port on your PC or
deskphone.
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. This device complies with part 15 of the FCC
Rules.
ISED Warning:
This device complies with Innovation, Science, and Economic
Development Canada licence-exempt RSS standard(s). Operation is
subject to certain conditions related to interference and undesired
operation of the device.
Label Information:
Trade Mark: Yealink
Product Name: Bluetooth USB Dongle
Model: BT51A
IC: CAN ICES-3(B)/NMB-3(B)
FCC ID: T2C-BT51AV2
IC: 10741A-BT51AV2
HVIN: BT51AV2
Manufacturer: Yealink Network Technology Co.,Ltd
Address: No.666 Hu’an Rd, Huli District Ximen City, Fujian, P.R.
China
Country of Origin: Made in China
FAQ:
Q: What should I do if any item is missing from the
package?
A: Contact your system administrator for assistance in case of
any missing items in the package.
“`
Bluetooth USB Dongle BT51A/BT51C
Quick Start Guide
Package Contents The following items are included in your package. If you find
anything missing, contact your system administrator.
BT51A
BT51C
Quick Start Guide
Pair with PC/Deskphone 1.Turn on the Bluetooth headset.
For BH72/76:
For BH71 Slide and hold the switch for 3 seconds to enter Bluetooth pairing
mode.
2. Connect the BT51A/BT51C to the USB port on your PC or deskphone.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IM PORTANT NOTE: Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: -Reorient or relocate
the receiving antenna. -Increase the separation between the equipment and
receiver. -Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. -Consult the dealer or an experienced
radio/ TV technician for help.
ISED Warning This device complies with Innovation, Science, and Economic
Development Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may
cause undesired operation of the device.
Le pré sent appareil est conforme aux CNR d’ Innovation, Sciences et Dé
veloppement é conomique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisé e aux deux conditions suivantes : (1)
l’appareil nedoit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioé lectrique subi, mê me si le
brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement: The device has been tested and comply with FCC/
ISED SAR limits. This equipment should be installed and operated with minimum
distance 5mm between the radiator& your body. Dé claration d’exposition aux
radiations: L’appareil a é té testé et est conforme aux limites SAR de la FCC/
ISED. Cet é quipement doit ê tre installé et utilisé avec une distance
minimale de 5mm entre le radiateur et votre corps.
Label
Trade Mark:Yealink Product Name:Bluetooth USB Dongle Model:BT51A This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation. IC:CAN ICES-3(B)/NMB-3(B) FCC ID:T2C-BT51AV2 IC
:10741A-BT51AV2 HVIN:BT51AV2
Yealink Network Technology Co.,Ltd No.666 Hu’an Rd,Huli District Ximen City,
Fujian, P.R. China Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>