MANKIW A100 3 In 1 Wireless Charger User Manual
- June 28, 2024
- MANKIW
Table of Contents
MANKIW A100 3 In 1 Wireless Charger
3 IN 1 WIRELESS CHARGER -A100-
USER MANUALI
Product Introduction
Thank you for purchasing this product! This product is a 3-in-1 Wireless Charger with a simple and generous design, suitable for mobile phones, earbuds, watch and other Qi wireless charging devices. Provide you with a convenient, fast, safe and free wireless charging experience.
Product Appearance
How to stand the bracket up?
Tip: Please hold the charging station as shown in the picture and shake it gently, the support accessories will pop out ,just align it with the groove.
Instruction
- Plug in the equipped Type-c cable and tum on the power.
- Stand the bracket up and place the device supporting Qi standard in the center of the charging area to start charging.
Indicator Status
Product Parameters
- Product name: 3 IN 1 WIRELESS CHARGER
- Model: A100 Product size: 12273115mm
- Product size(Fold): 1557320mm
- Input:9V/2A, 12V/1.5A
- Phone output: 5W/7.5/10W/15W
- Earphone output: 3W (Max)
- Watch output: 3W (Max)
Accessory List
- 3 IN 1 WIRELESS CHARGER
- 1m Type-c Cable
- 1 User Manual*1 18W
- Charging Adapter(QC3.0 )*1
Matters Needing Attention
- 1. Please use a qualified fast charging power adapter, otherwise it may cause unstable charging.
- Do not put metal debris or magnetic card on the product, it may cause damage to the product or abnormal charging.
- Please use the device as it is designed for and kindly follow the safety instructions, or it would be of your own responsibility for any damage caused.
Safety Instructions
- Do not pull the power supply hard, to avoid the power cord break or fall off.
- Do not disassemble the product or put it into fire or water to avoid short circuit and leakage.
- Do not use the product in severe high temperature, humidity or corrosive environment, to avoid damage to the circuit and leakage phenomenon.
Q&A
-
Q1. The phone does not charge
A: The phone is not aimed at the charging sensing area or the receiving coil is not installed correctly. -
Q2. Charging fever
A: It is normal for the receiving coil or transmitter to generate heat during wireless charging. -
Q3. Mobile phone charging intermittently.
-
A: The charging current of the power adapter is insufficient or the voltage is unstable, please use a qualified fast charging adapter.
A: The charging position is too biased, the electromagnetic induction is not in place, and the charging position needs to be adjusted. -
Q4. Slow charging
A: The wireless charging current allowed by the mobile phone itself or the external receiving coil is different, or the standby power consumption of the mobile phone is large when charging, it is recommended to reduce the standby program of the mobile phone.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and user body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>