MANKIW S99 Wireless Charger User Manual
- June 1, 2024
- MANKIW
Table of Contents
MANKIW S99 Wireless Charger
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Operation Conditions: Avoid harmful interference
- Radiation Exposure Limits : FCC compliant for an uncontrolled environment
- Recommended Distance: Minimum 20cm between the device and the body
Product Usage Instructions
Installation
Place the device ensuring a minimum distance of 20cm between the radiator and your body.
Operation
Ensure the device is powered on and follow the user manual for specific operation instructions.
Maintenance
Regularly clean the device as per the cleaning instructions provided in the user manual to ensure proper functioning.
FAQ
- Q : What should I do if I experience interference while using the device?
- A: If you experience interference, try repositioning the device to minimize any external sources of interference.
- Q: Can I modify the device in any way?
- A : No, any changes or modifications not approved may void your authority to operate the equipment as per FCC regulations.
Product Introduction
Thank you for purchasing this product! This product is a 3-in-1 Wireless Charger with a simple and generous design, suitable for mobile phones, earbuds, watches and other Qi wireless charging devices. Provide you with a convenient, fast, safe and free wireless charging experience.
Product Appearance
Instruction
- Plug in the equipped Type-C cable and turn on the power.
- Stand the bracket up and place the device supporting the Qi standard in the centre of the charging area to start charging.
Indicator Status
Product Parameters
- Product name: 3 IN 1 WIRELESS CHARGER
- Model : 599
- Input: 9V/2A
- Phone output : 5W/7.5W/10W/15W
- Earphone output : 3W(max)
- Watch output : 3W(max)
- Product size: 1 2312572mm
- Product weight : 258g
Matters Needing Attention
- Please use a qualified FAS charging power adapter, otherwise, it may cause unstable charging.
- Do not put metal debris or magnetic card on the product, it may cause damage to the product or abnormal charging.
- Please use the device as it is designed and kindly follow the safety instructions, or it will be your own responsibility for any damage caused.
Safety Instructions
- Do not pull the power supply hard, to avoid the power cord breaking or falling off.
- Do not disassemble the product or put it into fire or water to avoid short circuits and leakage.
- Do not use the product in severe high temperature, humidity or corrosive environment, to avoid damage to the circuit and leakage phenomenon.
FAQ
- Q1. The phone does not charge.
- A: The phone is not aimed at the charging sensing area or the receiving coil is not installed correctly.
- Q2. Charging fever.
- A: It is normal for the receiving coil or transmitter to generate heat during wireless charging.
- Q3. Mobile phone charging intermittently.
- A : If the charging current of the power adapter is insufficient or the voltage is unstable, please use a qualified fast charging adapter.
- A: The charging position is too biased, the electromagnetic induction is not in place, and the charging position needs to be adjusted.
- Q4. Slow charging.
- A : If the wireless charging current allowed by the mobile phone itself or the external receiving coil is different, or the standby power consumption of the mobile phone is large when charging, it is recommended to reduce the standby program of the mobile phone.
FCC statement
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>