MANKIW AM108 Magnetic Wireless Car Charger User Manual

MANKIW AM108 Magnetic Wireless Car Charger

Produce Description

1. Magnetic charging area
2. USB-C port
3. Adjustment knob
4. Air vent clip
5. Dashboard sticker mount
6. Heat vent

installation method for air vent clip

1. Rotate the air vent clip knob counterclockwise to extend the parallel hook to its longest length. Insert the hook into the air vent and hook it onto the car’s ventilation grille.

2. Rotate the air vent clip knob clockwise and adjust the support portion to secure the parallel hook onto the car’s air vent.

3. Loosen the adjustment nut on the back of the wireless charger (no need to remove the nut). Push the wireless charger onto the connecting ball and tighten the nut.

4. Connect the Type-C cable to the product and . the power source, then place your phone on it to start charging.

Installation method for dashboard sticker mount

1. Clean the area where you want to attach the dashboard sticker mount.

2. Peel off the protective film from the double-sided adhesive and stick it to the desired location.

3. Loosen the adjustment nut on the back of the wireless charger (no need to remove the nutl. Push the wireless charger onto the connecting ball and tighten the nut.

4. Connect the Type-C cable to the product and the power source1 then place your phone on it to start charging.

Indicator status

State

|

Standby

|

Charging

|
---|---|---|---

Indica t or light

|

Discoloration

|

Discoloration

|

Blue flashing

1. After powering on, the indicator light will illuminate and display a color-changing state. It helps you locate it in the dark!
2. If it detects foreign objects, the indicator light will flash blue.

If an error is detected:

1. Check if your phone supports wireless fast charging.
2. Make sure there are no metal objects, credit cards, or other items on the back of your phone.
3. After checking, unplug the charging cable, then plug it back in and start charging again.

Specification

Tip

1. This charger requires a fast charging adapter that supports QC or PD, with a minimum output power of 18W. Please use the appropriate adapter.
   

2. Do not disassemble this product without authorization.

3. Do not use this product in high temperature or humid environments. Keep it away from fire and water.

4. When using a USB-C power adapter, make sure the connection cable is fully inserted into the power adapter before plugging it into the power outlet.

5. S. Do not place metal objects (such as keys, coins, batteries, or jewelry) on this product while using it, as it may cause charging abnormalities or overheating.

6. Compatible with Apple iPhones that have magnetic functionality, this charger is only suitable for iPhone 15/14/13/12 series phones without protective cases, official MagSafe cases, and manltiw magnetic protective cases.
   

7. Please use the charging cable provided with the charger. Apple cables or other third-party cables may interfere with the charging process.

8. Before using the device1 please ensure that the device1 cable, or other accessories are not damaged. If they are damaged, do not use the device.

Produce list

Magnetic wireless car charger’l
Air vent clip”1
Dashboard sticker mount’l
Instruction manua1•1
Charging Cable”1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>