MANKIW C13 Automatic Wireless Car Charger Instruction Guide

MANKIW C13 Automatic Wireless Car Charger

Specification

• Brand MANKIW
• Model C13
• Connectivity technologies Wireless
• Connector Type Micro USB Type B
• Compatible Devices Smartwatches
• Compatible Phone Models iPhone 14/13/12/11/XR, Samsung S20/S10, and Any QI cell Phone
• Special Feature Auto Clamping Wireless Car Charger Mount, 15W Fast Charger
• Color Black
• Input Voltage 12 Volts
• Total USB Ports 1
• Product Dimensions 4.29 x 2.55 x 0.82 inches
• Item Weight 4.3 ounces

What’s In the Box

• Wireless Car Charger
• USB Cable

Mounting Instruction

Driving Sensibly Without Blocking Your Eyes

Clips that open and clamp automatically

Once your phone gets close to the holder, the electrical clips will automatically open.

Automatic Phone Grip

when holding the phone while pushing it

FRIENDLY TO THICK CASE

Do not remove the phone case.

Just Wireless Charging Use Qi-enabled mobile devices

Scalable Adjustable Base

To find the best charging point for different phone models, adjust the telescoping support.

Simple to Access All the Features

Important Information

• Make sure the working temperature is greater than 0°C (32°F), as the motorized arms will not operate below that temperature. If your living space is chilly, we advise warming up the holder by letting hot air from the vent blow on it before using the holder.
• To ensure that the motor has adequate power when you clamp or release the phone, plug the cable into the QC3.0 car charger. Otherwise, the clamping arms won’t move.
• About the vehicle charger: In order to ensure rapid charging, please plug the cable into a QC 2.0/3.0 car charger. Non-QC car chargers, 2.4A car chargers, or USB ports do not allow fast charging or provide enough power for this device. The product includes a 4.92-foot/1.5-meter Micro USB cable, but no car cigarette lighter
• About the phone case: For optimum charging, please take off any uneven or tough cases, metal ring holders, metal attachments, and credit cards. Make sure the thickness of the phone case is no more than 4mm (0.16 inches).
• Please adjust the bottom bracket to position the phone at the wireless charging inductive center if the charging coil has to be aligned. It won’t charge if it’s set incorrectly.
• To avoid your phone overheating, turn off the screen when using wireless charging and close any open apps to save energy.
• Red Light Indicates Incapability to Charge: 1) Please align the telescope tray; 2) Wireless charging is not supported by the case; 3) Connect the cord to the car charger (QC2.0/3.0).

Take and put something in one hand

• Design for Automated Opening
  Containing a sophisticated sensor built-in. The mount’s two clips will automatically open.

• Immediately Clamping
  Your phone will automatically clamp with the elastic arm that is driven by electricity.

• Simple Release
  Just touch a small metal object to activate the metal induction sensor.
  

Many Compatibilities

Samsung Galaxy S10+/S10/S9+/S9/S8+/S8/S7+/S7/S6/Note 5: Max 10W Fast Charger; iPhone XS Max/XS/XR/X/8: Max 7.5W Fast Charger; Other Qi-Enabled Phones: Max 5W. It needs a QC 3.0 car charger adaptor as its power source for the 10W and 7.5W rapid charging modes.

Flexible Viewing

The safest way to access your phone’s systems, such as your GPS and phone conversations, is through the full 360-degree rotation, which provides for optimal vision and simpler use of features.

Features

• Design of Intelligent Automated Opening and Clamping Clips
  One-handed operation with an integrated cutting-edge sensor. When the phone is mounted to the holder, two clips of the mount will automatically open, close, and hold it in place. To release the phone, press the quick-release button on any side; the clips will then automatically open, allowing you to remove it. Please press the green button on the bottom of the wireless charger to activate the sensor if the clip could not open automatically.

• Attachment for Wireless Fast Car Charger
  Charger and phone holder are combined in one piece by the MANKIW 2-IN-1 Design. To maintain the phone and coils aligned so that the wireless charging pad gives a speedy charger while driving, pull down the bottom bracket. Keep you away from the cables or cords that are knotted for locating. GPS and phone calls are more convenient with a cell phone holder that may be installed in a car’s windscreen dashboard air vent.

• Faster & Thick Case-Friendly Charging
  While charging, you don’t need to take off your phone case (most phone cases on the market, with the exception of rough, uneven ones). All phones with a width of 60 to 80 mm may be held securely in the auto holder, making it ideal for all QI-enabled devices. It needs a QC 3.0 car charger adaptor as its power source for the 10W and 7.5W rapid charging modes.

• Adjustable Vision, Stable Sucker
  On most surfaces, including the dashboard, Secure Sucker adheres firmly. The dashboard car mount may be moved and adjusted in two different ways: the movable arm and 360-degree joint ball can help you find the ideal position for safe driving. Also, the charger may be mounted on the automobile air vent in a variety of ways thanks to the ventilation holder that is included.

• Accordance and Warranty
  Compatible with all Qi-enabled smartphones, suitable for devices with a screen size of 4–6.5 inches.

FAQs

Does the wireless charger work with my phone?****

Yes, it is compatible with any Qi-enabled device.

How long does it take to charge my phone?****

It takes about 2.5 hours to fully charge a 3000mAh battery.

How long will it take for my phone to be charged?****

It depends on the power of your phone and the power of the charger. But it will take about 2.5 hours for a 3000mAh battery.

Does this wireless charger work with my case?****

Yes, this wireless car charger can work with most cases, but we recommend you remove your case before using the wireless charger.

Is there any temperature limitation?****

The working temperature should be between 0°C (32°F) and 40°C (104°F). If the temperature is below 0°C (32°F), the motorized arms will not operate, and if the temperature is above 40°C (104°F), please do not use this product.

Can I leave wireless charger on all the time?****

It is entirely safe to leave your phone on the charging pad or mat overnight or for an extended amount of time because the majority of charging pads will safely trickle charge your phone battery to keep it fully charged at all times.

Do wireless chargers automatically stop charging?****

Auto-off: When the device is fully charged, the wireless charger turns off, saving energy, ensuring a safer charge, and reducing the risk of your battery overheating.

How fast is wireless charging in cars?****

The speed at which you can charge your phone using a wireless vehicle charger is one of its main advantages. The majority of wireless car chargers operate at speeds of up to 10 watts, with more recent models delivering 15 watts.

Do wireless chargers know when to stop?****

The wireless charger will stop sending current when your phone stops requiring it. Since your phone won’t overcharge, you may leave it on a wireless charging station overnight and get a good night’s sleep.

How efficient is wireless charging?****

You receive the added efficiency of not having to spend time plugging and disconnecting the vehicle when wireless charging functions within a small efficiency range (88-93%) that is equivalent to Level 2 plug-in charging.

Do you need Bluetooth for wireless charging?****

no. You can use any wireless charger as long as it is compatible with the wireless charging standard supported by your smartphone.

What technology is used in wireless charging?****

A form of wireless power transfer is inductive charging, commonly referred to as wireless charging or cordless charging. To supply electricity to portable gadgets, electromagnetic induction is used.

Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>