Yealink T2C-RSP Enterprise Multifunctional Conference Room Sensor User Guide

Yealink T2C-RSP Enterprise Multifunctional Conference Room Sensor

Specifications:

• Power Adapter: 5V/1.2A
• Includes Stand, 3M Tape, Power Extension Cable (Optional), and Shim
• Hardware Interface: Light sensor, Wireless status indicator light, System indicator light, Temperature and Humidity sensor, USB-A Port, Reset key, Internet Port, Power port
• Connection: Cat5e (not included), IEEE 802.3af compliant PoE Hub/Switch

Product Usage Instructions

Installation:
Follow these steps to install your RoomSensor Pro:

1. Glue the locating sticker to the ceiling following the provided text instructions on the stickers.
2. Install the stand using the 3M tape. This method is suitable for all ceilings.
3. If routing wiring through the wall, make a hole for threading as needed.
4. For specific ceiling types like plasterboard or aluminum suspended ceilings, refer to the installation instructions provided in the manual.

Route the Wiring and Install:
After installing the stand, route the wiring and securely install the RoomSensor Pro onto the stand.

Hardware Interface:
The RoomSensor Pro features various hardware interfaces including light sensor, wireless status indicator light, system indicator light, temperature and humidity sensor, USB-A Port, Reset key, Internet Port, and Power port.

Connection:
Connect the RoomSensor Pro using a Cat5e cable (not included) or an IEEE 802.3af compliant PoE Hub/Switch. Alternatively, connect power and network cables for power and internet supply.

FAQ:

1. Q: Can I use third-party accessories with RoomSensor Pro?
   A: It is recommended to use accessories provided or approved by Yealink to ensure optimal performance. Unapproved third-party accessories may result in reduced performance.

2. Q: What do I do if I need to run exposed wiring instead of routing it within the wall?
   A: In such cases, you will need to use the provided shim. Peel off the backing of the shim, attach it to the stand (flat side), and then secure the stand onto the locating sticker as instructed.

For more information please scan

Package Contents

We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance.

Installation

Note:

• It is recommended to install the RoomSensor Pro at a height less than 3 meters from the ground.
• It is recommended to install it directly above the center of the meeting room table during installation.
• Please wipe the ceiling at the respective location with a dry paper towel before installation.

Glue locating sticker

Install the stand

Install using 3M tape

Install using expansion screws

Suitable for plasterboard ceilings.

Note:
If you choose to run exposed wiring instead of routing it within the wall, you will need to use the shim. Peel off the backing of the shim and attach it to the stand (the flat side). Then, secure the stand onto the locating sticker.

Install using special-shaped screws

Note:
If you choose to run exposed wiring instead of routing it within the wall, you will need to use the shim. Peel off the backing of the shim and attach it to the stand (the flat side). Then, secure the stand onto the locating sticker.

Route the wiring and install the RoomSensor Pro onto the stand

Hardware Interface

Connection

Note:
You can also connect the power cable and network cable to supply power and internet
Provides network support for future firmware updates.

About Yealink
Yealink (Stock Code: 300628) is a global-leading provider of Unified Communication & Collaboration Solutions specialized in video conferencing, voice communications, and collaboration, dedicated to helping every person and organization embrace the power of “Easy Collaboration, High Productivity”.
With best-in-class quality, innovative technology, and user-friendly experiences, Yealink is one of the best providers in more than 140 countries and regions, ranks No.1 in the global market share of IP Phone, and is the Top 5 leader in the video conferencing market (Frost & Sullivan, 2021).

Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for firmware downloads, product documents, FAQ, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. Web: www.yealink.com
Copyright©2023 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• Yealink Support
• Yealink | UC & C Terminal, Video Collaboration, Conference Phone, IP Phone, Headsets & Video Conferencing
• Yealink Ticket

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>