CASTLES TECHNOLOGY S2L POS Terminal User Manual

CASTLES TECHNOLOGY S2L POS Terminal

Product Information

Specifications

• Product : S2L POS Terminal

• Manufacturer: Castles Technology Co., Ltd.

• Model: CRT-S2-01-02-V1.1

• Address: 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District,
  New Taipei City 23143, Taiwan R.O.C.

• Website: http://www.castech.com.tw

Product Usage Instructions

Regulatory Instructions

• Before using the terminal, ensure it has not been disassembled, modified, or shows any abnormal behavior. Do not use if any issues are detected.
• Avoid strong electromagnetic waves from devices like microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc.
• Condensation may occur when transitioning from a cold to a warm environment. Do not use the unit until any water droplets have evaporated.
• Avoid static electricity by not leaving the unit in direct sunlight for extended periods. Handle the unit carefully to prevent damage from impact, drops, or heavy objects.
• Power the unit with SATURN-PX by Castles Technology using a 12V input only. Operating temperature range is 0°C to 50°C.

Hardware Setup
Parts of the Terminal

• Front: LCD display, LED Indicator, Contactless Card Landing Zone, Front camera
• Rear: Back cover, Product label, Micro SD Card Slot, SAM Card slots 1-2, USB Type C, Com Port, Magnetic Stripe Reader
• Bottom: SAM 1
• Upper: SAM 2

Insert SAM Card

1. Remove the back cover.
2. Insert SAM card into the desired slot.
3. Reverse the operation of step 1 to install the back cover.

Insert Micro SD Card

FAQ

• Q: What should I do if I encounter condensation on the unit?
  A: If condensation occurs, do not use the unit until the connected water droplets evaporate to prevent damage.

• Q: How should I handle static electricity when using the terminal?
  A: Avoid static electricity by not leaving the unit in direct sunlight for extended periods and handle it carefully to prevent damage.

• Q: Can I power the unit with any power source?
  A: Power the unit with SATURN-PX by Castles Technology using a 12V input only to ensure proper functionality.

S2L POS Terminal
Book 2 User Manual S2L

• Version 1.1
• Nov. 2023
• CRT-S2-01-02-V1.1-CE-FCC-IC-UL-CB
• Castles Technology Co., Ltd.
• 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District,
• New Taipei City 23143, Taiwan R.O.C.
• http://www.castech.com.tw

WARNING

• Information in this document is subject to change without prior notice.
• No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd.
• All trademarks mentioned are proprietary to their respective owners.

Revision History

• Add Wifi/BT connection operation
• Modify appendix

| Yao

Introduction

This document provides a guideline for operating and configuring Castles S2L terminal. The scope of this document includes setting up the terminal, basic operation, application lifecycle, and some advanced features.

Regulatory instruction of usage

• Before using the terminal, please check has it been disassembled, modified, or showed abnormal situation. If yes, please do not use.
• Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc.
• Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate.
• Static electricity may occur in some places (such as where you use a carpet).
• Please do not leave it in the sun for a long time.
• Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop or heavy objects on top of the unit.
• Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch.
• Power supplied by SATURN-PX by Castles Technology with 12V input only.
• Operation temperature is 0 ℃~50 ℃.

 Hardware Setup

1. Parts of the Terminal

2. LCD display

3. LED Indicator

4. Contactless Card Landing Zone

5. Front camera

6. Keypad

7. Smart Card Reader
   Rear

8. Back cover

9. Product label

10. Micro SD Card Slot

11. SAM Card slots 1-2

12. USB Type C

13. Com Port

Insert SAM Card

• Step 1: Remove the back cover.
• Step 2: Insert SAM card into the desired slot.
• Step 3: Reverse the operation of step 1 to install the back cover

Insert Micro SD Card

• Step 1: Remove the back cover.
• Step 2: Place the Micro SD memory card.
• Step 3: Reverse the operation of step 1 to install the back cover.

 Basic Operation

WIFI connection

1. 1. Slide up to view all the applications in the terminal.
2. Click System Panel.
3. Input first password and second password.
4. Click Settings.
5. Click Network & internet
6. Click Wi-Fi
7. Enable Wi-Fi and select desired Wi-Fi SSID.

Bluetooth connection

1.  Repeat the step 1 to 4 in Wi-Fi connection.
2.  Click Connected devices
3. Click Pair new device
4.  Confirm for access.
5. Check for the result.

FCC

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Radiation Exposure Statement:

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
• Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body.
Caution :

1. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2.  where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

UL / IEC 62368-1

• Warning:
  Power cord shall be connected to a socket-outlet with earthing connection.

• Warning:
  This product is intended to be supplied by a Listed Power Adapter “L.P.S.” (Or “Limited Power Source”) and is rated at 12 Vdc, 1 A min., Tma = 40 degrees C.

• Warning:
  The equipment is only suitable for mounting wall at height ≤ 2m..

Castles Technology Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>