CASTLES TECHNOLOGY SATURN1000MINI Android POS Terminal User Manual

: June 10, 2024
: CASTLES TECHNOLOGY

Table of Contents

CASTLES TECHNOLOGY SATURN1000MINI Android POS Terminal
Introduction
Regulatory instruction of usage
Hardware Setup
Insert Battery
Insert SAM Card
FCC Statement
- UL / IEC 62368-1
- Confidential
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CASTLES TECHNOLOGY SATURN1000MINI Android POS Terminal

Product Information

The CASTLES TECHNOLOGY SATURN1000MINI POS Terminal is a compact and portable device that is designed for use in various retail and business settings. It features a range of hardware components such as a camera, contactless card landing zone, LCD display, smart card reader, rechargeable battery, product label, charger pin, GSM micro SIM card slot, SAM card slots, USB Type C slot, and power button/LED indicator. The device is manufactured by Castles Technology Co., Ltd. and is made available under the model name S1MINI. The user manual contains detailed information on regulatory instructions for usage, hardware setup, basic operation, application lifecycle, and advanced features. The device is available in a confidential version 1.0 as of December 2022 and is compliant with CE, FCC, IC, CB, UL, and cUL regulations.

Product Usage:

To set up the terminal, follow the steps given below:

Step 1: Before using the terminal, check whether it has been disassembled, modified or any abnormal situation has occurred. If yes, do not continue to use the device.

Step 2: Keep the terminal away from strong electromagnetic waves such as microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas etc.

Step 3: Avoid moving the device from a cold place to a warm place to prevent condensation. In case of condensation, do not use the unit until the connected water droplets have evaporated.

Step 4: Handle the device with care as it is a precision instrument. Do not apply impact, drop or heavy objects on top of the unit. Also, do not attach dust, oil, etc. to a part of the power terminal and avoid scratching it.

To insert the battery into the terminal, follow the steps given below:

Step 1: Remove the battery cover.

Step 2: Insert the battery into the compartment.

Step 3: Reverse the operation of step 1 to install the battery cover.

With these steps, you can set up and use the CASTLES TECHNOLOGY SATURN1000MINI POS Terminal for your business needs.

WARNING

Information in this document is subject to change without prior notice.
No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd.
All trademarks mentioned are proprietary to their respective owners.

Revision History

CASTLES-TECHNOLOGY-SATURN1000MINI-Android-POS-Terminal-
FIG-9

Introduction

This document provides a guideline for operating and configuring Castles S1 MINI terminal.
The scope of this document includes setting up the terminal, basic operation, application lifecycle, and some advanced features.

Regulatory instruction of usage

Before using the terminal, please check the does it has been disassembled, modified, or happened the abnormal situation. If yes, please do not continue to use.
Please stay away from strong electromagnetic waves.
(Example) Microwave ovens, magnets, shoplifting prevention devices, high- voltage wires, automatic doors, communication antennas, etc.
Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate.
Static electricity may occur in some places (such as where you are using a carpet).
Please do not leave it in the sun for a long time.
Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop or heavy objects on top of the unit.
Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch.

Hardware Setup

Parts of the Terminal

Front

CASTLES-TECHNOLOGY-SATURN1000MINI-Android-POS-Terminal-
FIG-1

Camera
Contactless Card Landing Zone
LCD Display
Smart Card Reader
- Rear****
Product Label
6.Charger Pin
7.Rechargeable Battery Cover
8.GSM Micro SIM Card Slot
9.SAM Card Slots
10.USB Type C Slot
11.Power Button / LED Indicator

Green Light: External power source connecting and battery is full.
Red Light: Battery charging function activated

Insert Battery

CASTLES-TECHNOLOGY-SATURN1000MINI-Android-POS-Terminal-
FIG-4

Step 1: Remove the battery cover.
Step 2: Insert the battery into the compartment.
Step 3: Reverse the operation of step 1 to install the battery cover.

Note

Please confirm the battery is installed before power on the terminal.
Highest specified charging temperature: 45±3°C; Lowest specifiedcharging temperature: 0±3°C.

Insert SAM Card

Step 1: Remove battery cover / back cover
Step 2: Insert SAM card into desire slot.
SAM
Gold contact is on the upper side of the card and facing down.
Step 3: Reverse the operation of step 1 to install the battery cover.

Insert GSM Micro SIM Card

Step 1: Remove battery cover / back cover
Step 2: Insert GSM Micro SIM card into desire slot.
SIM:
Cut corner is on the upper left side of card and facing down.
Step 3: Reverse the operation of step 1 to install the battery cover.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution

the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Radiation Exposure Statement

The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

UL / IEC 62368-1

Warning
Power cord shall be connected to a socket-outlet with earthing connection.

Warning
Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations.

Warning
This product is intended to be supplied by a Listed Power Adapter “L.P.S.” (Or “Limited Power Source”) and is rated at 5 Vdc, 2 A min., Tma = 40 degrees C.