CASTLES TECHNOLOGY S1L2 POS Terminal User Manual
- June 17, 2024
- CASTLES TECHNOLOGY
Table of Contents
CASTLES TECHNOLOGY S1L2 POS Terminal
Product Information
- Specifications
- Product Name: Castles S1L2 POS Terminal
- Manufacturer: Castles Technology Co., Ltd.
- Model: S1L2
- Version: 1.0
- Date: Sep. 2023
- Regulatory Approvals: FCC, IC, UL, CB, CE-EN
- Address: 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C.
- Website: http://www.castech.com.tw.
- Introduction
- This document provides a guideline for operating and configuring the Castles S1L2 POS terminal. It covers the setup process, basic operation, application lifecycle, and advanced features.
- Regulatory Instruction of Usage
- Before using the terminal, please ensure that it has not been disassembled, modified, or encountered any abnormal situations.
- If any of these conditions are present, please do not continue to use the terminal.
- It is important to stay away from strong electromagnetic waves such as those emitted by microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, and communication antennas.
- When moving the terminal from a cold place to a warm place, condensation may occur.
- In such cases, it is advised not to use the unit until the connected water droplets have evaporated.
- Static electricity may occur in certain locations, such as when using a carpet.
- It is recommended not to expose the terminal to direct sunlight for extended periods.
- Please handle the unit with care as it is a precision instrument.
- Avoid applying impact, dropping heavy objects on top of the unit, attaching dust or oil to the power terminal, and scratching the unit.
- Hardware Setup
- The hardware setup section is not provided in the text extract.
- For detailed hardware setup instructions, please refer to the complete user manual.
Product Usage Instructions
- Section 1: Setting Up the Terminal
- This section provides step-by-step instructions on how to set up the Castles S1L2 POS terminal.
- Unpack the terminal and ensure that all the accessories are included.
- Connect the power adapter to the terminal and plug it into a power outlet.
- Connect any required peripherals, such as a cash drawer or barcode scanner, to the terminal.
- Power on the terminal and follow the on-screen prompts to complete the initial setup process.
- Section 2: Basic Operation
- This section explains the basic operation of the Castles S1L2 POS terminal.
- To turn on the terminal, press and hold the power button until the device powers on.
- Once powered on, you will be presented with the main menu on the screen.
- Use the touchscreen or keypad buttons to navigate through the menu options.
- Select the desired option by pressing the corresponding button or tapping on the touchscreen.
- Follow the on-screen instructions to perform various operations, such as processing transactions or managing inventory.
- Section 3: Application Lifecycle
- This section provides information on the application lifecycle of the Castles S1L2 POS terminal.
- To launch an application, navigate to the main menu and select the “Applications” option.
- Choose the desired application from the list and follow any additional prompts or instructions.
- To close an application, press the “Home” button or navigate back to the main menu and select a different option.
- It is recommended to regularly update the terminal’s software and applications to ensure optimal performance and security.
- Section 4: Advanced Features
- This section covers some of the advanced features available on the Castles S1L2 POS terminal.
- Advanced features may include integration with external systems, customization options, and additional functionality beyond basic operation.
- Refer to the complete user manual for detailed instructions on how to utilize these advanced features.
- Frequently Asked Questions (FAQ)
- Q: Can I use the Castles S1L2 POS terminal without connecting it to a power outlet?
- A: No, the terminal requires a power source to function properly. It needs to be connected to a power outlet using the provided power adapter.
- Q: Is it possible to connect multiple peripherals to the Castles S1L2 POS terminal?
- A: Yes, the terminal supports multiple peripheral connections. You can connect devices such as cash drawers, barcode scanners, and receipt printers to enhance its functionality.
- Q: How often should I update the software on the Castles S1L2 POS terminal?
- A: It is recommended to regularly update the software on the terminal to ensure that you have the latest features, bug fixes, and security enhancements. Check for updates periodically or follow the manufacturer’s recommendations.
Introduction
- This document provides a guideline for operating and configuring Castles S1L2 POS terminal.
- The scope of this document includes setting up the terminal, basic operation, application lifecycle, and some advanced features.
Regulatory instruction for usage
- Before using the terminal, please check the does it has been disassembled, modified, or happened in an abnormal situation. If yes, please do not continue to use it.
- Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc.
- Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate.
- Static electricity may occur in some places (such as where you are using a carpet).
- Please do not leave it in the sun for a long time.
- Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop, or heavy objects on top of the unit.
- Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch.
Regulatory Instruction of Usage
- Before using the terminal, please check if has it been disassembled, modified, or shown an abnormal situation. If yes, please do not use it.
- Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc.
- Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate.
- Static electricity may occur in some places (such as where you use a carpet).
- Please do not leave it in the sun for a long time.
- Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop, or heavy objects on top of the unit.
- Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch.
Hardware Setup
Parts of the Terminal
Front
-
Touch Pen Holder
-
Camera (2 Megapixel)
-
LCD Display (5”)
-
Smart Card Reader
-
Magnetic Stripe Reader
-
Contactless Card Landing Zone
Rear
-
GSM SIM card slots 1-2
-
Micro SD card slot
-
SAM slots 1-2
-
SAM slots 3-4
Upper side
-
COM Port
-
12V Power Connector
-
Type C USB slot
-
Ethernet Port
Insert SAM Card
- Step 1: Remove the four screws and rear cover.
- Step 2: Insert the SAM card into the desired slot.
- SAM 1 & 2 & 3 & 4: Gold contact is on the lower side of the card and facing down.
- Step 3: Reverse the operation of step 1 to install the rear cover.
Insert GSM SIM Card
- Step 1: Remove the four screws and rear cover.
- Step 2: Open the SIM socket and insert the GSM SIM card into the desired slot.
- SIM 1: Gold contact is on the lower side of the card and facing down.
- Step 3: Reverse the operation of step 1 to install the rear cover.
Insert Memory card
- Step 1: Remove the four screws and rear cover.
- Step 2: Open the slot cover and place the Micro SD memory card.
- Gold contact is on the lower side of the card and facing down.
- Step 3: Close and lock up the slot cover.
- Step 4: Reverse the operation of step 1 to install the rear cover.
Device Wall Mount
The S1L2 can support wall mount by 4 screws using the 4 screw holes on the
rear side of the device.
Appendix
UL/IEC 62368-1
- Warning:
- The power cord shall be connected to a socket outlet with an earthing connection.
- Warning:
- Risk of explosion if the battery is replaced by an incorrect type. Dispose of expended batteries by local disposal regulations.
- Warning:
- This product is intended to be supplied by a Listed Power Adapter “L.P.S.” (Or “Limited Power Source”) and is rated at 12 Vdc, 1 A min., Tma = 50 degrees C.
- Warning:
- The equipment is only suitable for mounting walls at heights ≤ 2m.
FCC
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The exposure standard employs a unit of
measurement known as the Specific Absorption Rate or SAR. The SAR limit set by
the FCC is 4 W/kg. Tests for SAR are conducted using standard operating
positions accepted by the FCC with the EUT transmitting at the specified power
level in different channels. The FCC has granted Equipment Authorization for
this device with all reported SAR levels evaluated as in compliance with the
FCC RF exposure guidelines. SAR information on this device is on file with the
FCC and can be found under the Display Grant section of www.fcc.gov after
searching on
- FCC ID: WIYSLM500QA
IC Industry Canada statement
This device complies with ISED’s license-exempt RSSs.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when operated in portable exposure conditions. Informations concernant l’exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada (IC).
Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
- Castles Technology Co., Ltd. Confidential
- All rights reserved.
Confidential
- Version 1.0
- Sep. 2023
- CRT-S1-23-1.0- /FCC/IC/UL/CB/CE-EN
- Castles Technology Co., Ltd.
- 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District,
- New Taipei City 23143, Taiwan R.O.C.
- http://www.castech.com.tw.
WARNING
- Information in this document is subject to change without prior notice.
- No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd.
- All trademarks mentioned are proprietary to their respective owners.
Revision History
| Version | Date | Descriptions | Author |
|---|---|---|---|
| 1.0 | 2023.09.18 | Initial creation. | Yao |