Alandental TR-DCH04 Dental Composite Resin Heater Instruction Manual
- June 25, 2024
- Alandental
Table of Contents
TR-DCH04 Dental Composite Resin Heater
“`html
Specifications
Product: Composite Heater
Usage: Heating resin, sodium hypochlorite, and
other materials, temperature preservation of AGRA printing film
material
Voltage: 110V-220V/50Hz
Rated Current: 0.2A
Control: Precision circuit control for heating
element
Temperature Accuracy: ±30°C
Product Usage Instructions
1. Connection and Setup
-
Connect the power cable to the SMART-one host and plug it into
the socket. -
The host will start up automatically. Press the SET key to
enter the settings mode.
2. Temperature Adjustment
-
While in settings mode, use the + or – keys to adjust the
required temperature. -
Press the SET key again to confirm the temperature
setting.
3. Heating Process
The screen will display the current temperature. The heater will
stop heating automatically once the preset temperature is
reached.
Maintenance
The heating plug can be wiped with an alcohol cotton ball for
disinfection. Do not immerse the entire machine in liquid.
Cautions
-
Avoid touching the high-temperature parts of the heating
machine to prevent burns. -
Avoid scratching the heating machine and its bottom surface
during use.
FAQ
Q: Can I use the composite heater for materials other than
resin and sodium hypochlorite?
A: The composite heater is designed for heating various
materials, but please refer to the product manual for compatibility
and safety guidelines.
Q: How do I adjust the temperature on the heater?
A: Use the + or – keys while in settings mode to adjust the
temperature, then press the SET key to confirm.
“`
8 USING INSTRUCTIONS
l .Please connect the power cable with the SMART-one host, and charge the plug
into the socket.
2.The host starts up automatically, press the key SET, when the screen goes
flashing and get into the setting states, press “+” or” – “to adust the
required temperature, and press key SET again.
3.The screen displays the current temperature and will stop heating
automatically when the preset temperature is reached.
9 MAINTENANCE
The heating plug can be wiped with the alcohol cotton ball disinfection,the
whole machine can not be immersed into the liquid.
10 CAUTIONS
l .The temperature may be high when using the heating machine. Don’t burn.
2.Avoiding scratching the heating machine and it’s bottom surface when using
it.
Composite Heater
Operating instruction
Please read the product instruction carefully before using the product We reserve the right to change the design without notice
VERSION: 2022 PUBLICATION DATE: MARCH 2022
1 PRODUCT INTRODUCTION
The composite heater is mainly used for heating the resin, sodium hypochlorite
and other materials as well as the temperature preser vation of AGRA printing
film material.
2 PRODUCT LIST
l .The composite heater(whole machine) 2.Power cable(2.0)
Indication marks The power interface
3 SCOPE OF APPLICATION
The requirements of technical of this product is applicable to the product of
the composite heater and technical requirements of
6 TECHNICAL PARAMETERS
Voltage
110V-220V/50Hz
Rated current
0.2A
4 PRODUCT PERFORMANCE
This product use the precision circuit the control the heating element, make
the accuracy of heating to 30(.
5 SCHEMATIC DIAGRAM OF PRODUCT STRUCTURE
Rated power Working temperature Thermoforming Ranges Temperature control
range
40W 40W 30~70 °C <3°c
l i
Resin heating hole Sodium hypochlorite heating hole
7 WORKING TEMPERATURE 203°C, THE MODE OF
PREDETERMINED HEATING OR HEAT PRESERVATION.
Billaneon AGAR heating hole
MATERIAL Thermosetting resin
(for filling) Thermosetting resin
(for connecting)
PRTEEMDEPTEERRAMTUINREED 39 °c ss 0c
HEATING TIME REQUIRED
1505S 5185S
aiust me ourro UIO crvsiaL OISP,c
Thermosetting Thermosetting hypochlorite
38 °c 60 °C
1405S 6205S
TemperatuAreGAprReservation
Preset insulation temperature 60°C