Alandental JG-C4 Dental Teaching System Instruction Manual
- June 17, 2024
- Alandental
Table of Contents
DENTAL TEACHING
SYSTEM
MODEL: JG-C4
INSTRUCTION MANUL
ATTENTION:
PLEASE KINDLYREAD THIS MANUAL CAREFULLYBEFORE OPERATION.
Product introduction
Thank you for purchasing our Electrical Oral Simulation Practice System, Model
TR-THMO1. It is practice equipment, which used for dental school, universities
and oral medicine specialized student before clinical practice teaching
simulation. It has such advantages as solid structure, handsome shape, easy
operation and high reliability as an ideal upgraded product for the modern
dental clinics. During this simulation environment, the students can know and
control clinical operation technology of oral courses as early as possible,
also help them to get familiar with clinical teaching environment. It can make
the professional theory teaching, experiment teaching and clinical teaching
effectively combined well. This also benefit to the students to improve their
professional learning enthusiasm and interest, strengthen their theoretical
knowledge, cultivate the students’ oral medicine clinical thinking ability,
improve their operation skills.
Simulation teaching system mainly includes: Simulated simple head model,
Simulated body, Belt., Simulated teeth.
Overall structure
(Figure1)
(Remarks:No backrest)
Working environment
A: An ambient temperature range of -20°C to +40°C
B: Arelative humidity range is not more than 80%
Transport and storage condition
A: An ambient temperature range of -20°C to +40°C.
B: A relative humidity is not more than 80%.
C: An atmospheric pressure range of 70kPa to 116kPa.
D: Non-corrosiveness gas inside.
Installation procedures
-
Unpacked check
Unpack the packing carton and check if the equipment is sound without any damage. Check if the accessories and spare parts are complete and sound according to the packing list. For any question, please do not hesitate to contact the manufacturer. -
Assembling
A. Put the metallic part into the check, from the up side down. See Figure 2, 3, 4 show.
B. Match the “Hole B” “Hole A” (figure 8) corresponding to
“Metallic part B” “Metallic part A” (figure 5), and “Screw 1” to the “Hole C”
(figure 5, 6). Twist the black “Handle” clockwise, then fix. (figure 6)
C. Fix the simulation head and simulation body with screw. (Please kindly check the circles in figure 7,8).
D. Adjust the simulation head. Twist the handle to FRONT, then you can adjust the direction, twist the handle to the BACK (figure 10), settle the simulation head. It’s multi-direction. (figure 11)
Maintenance
- After adjust the simulation head, ensure it is locked before it is used.
- Keep the simulated mouth clean.
- Replace new simulated teeth when it needs.