Humantechnik EarisMAX Ladestativ Charging Stand User Manual
- June 25, 2024
- HUMANTECHNIK
Table of Contents
Humantechnik EarisMAX Ladestativ Charging Stand
Specifications:
- Inductive charging stand for EarisMAX headphones
- Efficient and convenient charging without needing to connect a cable
- Charging time: approx. 150 minutes for a fully depleted battery
- Compatibility: Only compatible with EarisMAX headphones
Product Usage Instructions
Charging the EarisMAX Headphones:
- Hang the EarisMAX headphones on the bracket of the charging stand.
- The charging indicator will light up blue after a few seconds indicating the headphone battery is charging.
- When the battery is fully charged, the indicator will turn green for 1 minute and then go out.
- Remove the headphones from the charging stand once fully charged and ready for use.
Inductive charging stand for EarisMAX headphones
With this charging stand, your EarisMAX headphones can be charged efficiently
and conveniently without needing to connect a cable.
Package contents
- earisMAX charging stand
- USB-A to USB-C cable
- USB power supply with country adapter
- User manual
- Safety instructions
- Warranty card
Setup
- Insert the USB-C plug of the connection cable into the connection on the rear edge of the stand base. Insert the USB-A plug into the connection on the power supply unit.
- Connect the power supply unit to a domestic power socket. The charging indicator light on the charging stand will briefly light up purple.
- Charging the EarisMAX headphones
- Now hang the EarisMAX headphones on the bracket of the charging stand. The charging indicator lights up blue after a few seconds and the headphone battery is charging.
- When the battery is fully charged, the charging indicator lights up green for 1 minute and then goes out. The headphones can now be removed from the charging stand and used.
- The charging stand only needs approx. 150 minutes to fully charge a completely depleted battery.
Note : The inductive charging function is only compatible with EarisMAX headphones. Products from other brands cannot be charged using this function.
Specifications
- Dimensions (without headphones): Ø 140 mm x H 232 mm
- Weight (without headphones): 180 g
- Input voltage: 5 V
- Output power: 1.5 W.
- Operating principle: electromagnetic induction, operating frequency 160KHz
- Operating temperature: -10°C to ~45°C
- Storage temperature: -40°C to ~70°C
Specifications are subject to change without prior notice.
This device fulfils the requirements of the following EU directives:
- 2011/ 65/EU + 2015/863/EU RoHS Directive
- 2012/19/EU WEEE Directive
- 2014/53/EU RED Directive
Conformity with the above directives is confirmed by the CE mark on the device. CE declarations of conformity are available on the Internet at www.humantechnik.com.
Humantechnik’s UK authorised representative:
Sarabec Ltd, 15 High Force Road, MIDDLESBROUGH TS2 1RH United Kingdom Sarabec
Ltd., hereby declares that this device complies with all UK statutory
instruments. UK declaration of conformity is available from Sarabec Ltd.
Humantechnik Service-Partner
Germany
- Humantechnik GmbH Im Wörth 25 D-79576 Weil am Rhein
- Tel.: +49 (0) 76 21/ 9 56 89-0
- Fax: +49 (0) 76 21/ 9 56 89-70
- E-mail: info@humantechnik.com
Switzerland
- Humantechnik GHL AG Rastatterstrasse 9 CH-4057 Basel
- Tel.: +41 (0) 61/ 6 93 22 60
- Fax : +41 (0) 61/ 6 93 22 61
- E-mail: info@humantechnik.com
France Belgium
- SMS Audio Electronique Sàrl 1 rue des Entrepreneurs F-68300 Saint-Louis
- Tel. : +33 (0) 3 89/ 44 14 00
- Fax: +33 (0) 3 89/ 44 62 13
- E-mail: sms@audiofr.com
Netherlands
- Hoorexpert BV Gildenstraat 30 NL-4143 HS Leerdam
- Tel.: +31 (0) 3 45/ 63 23 93
- Fax: +31 (0) 3 45/ 63 29 19
- E-mail: info@hoorexpert.nl
Great Britain
- Sarabec Ltd 15 High Force Road GB-Middlesbrough TS2 1RH
- Tel.: +44 (0) 16 42/ 24 77 89
- Fax: +44 (0) 16 42/ 23 08 27
- E-mail: inquiries@sarabec.co.uk
For other service-partners in Europe please contact:
- Humantechnik Germany
- Tel.: +49 (0) 76 21/ 9 56 89-0
- Fax: +49 (0) 76 21/ 9 56 89-70
- Internet: www.humantechnik.com
- e-mail: info@humantechnik.com
FAQ
Q: How long does it take to fully charge the EarisMAX headphones?
A: The charging stand only needs approximately 150 minutes to fully charge a
completely depleted battery.
Q: Can products from other brands be charged using this charging
function?
A: No, the inductive charging function is only compatible with EarisMAX
headphones.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>