beyerdynamic TG D35 Dynamic Drum Microphone User Manual
- June 4, 2024
- beyerdynamic
Table of Contents
TG D35
DYNAMIC MICROPHONE
PRODUCT INFORMATION
Thank you for selecting the TG D35 dynamic microphone from beyerdynamic.
Please take some time to read carefully through this information before using the product.
Safety Information
-
Protect the microphone from moisture and sudden impacts.
You could damage the microphone! -
Do not blow into the microphone and do not knock on the microphone basket. It is preferable to carry out a speech trial.
Application
- Close miking of drums, for example snares and tom-toms
- Miking up percussion instruments such as congas and bongos
Connection
The TG D35 is fitted with a male 3-pin XLR connector and a 3/8″ thread for
mounting on stands or the supplied MKV 87 microphone clamp.
You can connect the microphone to any balanced microphone input. Available
cables for the microphone can be found under “Optional Accessories”. The use
of phantom power does not damage the microphone.
Setting up
- The microphone clamp should be attached to the drum hoop or to similar hardware components; in this way, the microphone can be set at the optimum angle to the audio source.
- The supercardioid polar pattern reduces crosstalk from neighbouring sources and increases feedback suppression.
Maintenance
Use a soft, damp cloth for cleaning the TG D35 microphone and connecting cable. If necessary, you can use a gentle cleansing agent (such as washing-up liquid), but on no account use a cleaner containing solvents! Make sure not to allow any liquid to enter the microphone grille.
Service
Servicing must be carried out by qualified service personnel only.
Dismantling the microphone yourself will invalidate the guarantee.
Version
Model Description . . . . . . . . . Order #
TG D35 Dynamic drum microphone, supercardioid, black, with 3-pin male XLR
connector, incl. MKV 87 microphone clamp . . . 708.429
Disposal
This symbol on the product, in the instructions or on the packaging means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
Frequency response curve
Polar pattern
Technical Specifications
Transducer type . . . . . . . . . . . . . Dynamic
Operating principle. . . . . . . . . . . Pressure gradient
Polar pattern . . . . . . . . . . . . . . . Supercardioid
Frequency response:
Close miking . . . . . . . . . . . . . . . . . . . . . . . . . . 50 – 14,000
Hz
Distant miking (measured at 1 m). . . . . . . . . . 60 – 14,000 Hz
Open circuit voltage. . . . . . . . . . . . 2.2 mV/Pa (-53 dBV) ±3 dB
Nominal impedance . . . . . . . . . . 600 Ω
Load impedance . . . . . . . . . . . . > 2 kΩ
Connector . . . . . . . . . . . . . . . . . XLR, 3-pin, male
Dimensions:
Length. . . . . . . . . . . . . . . . . . 72 mm
Shaft diameter . . . . . . . . . . . . 28.5 mm
Head diameter . . . . . . . . . . . . 35 mm
Weight (without clamp). . . . . . . . 95 g
For further distributors worldwide, please go to
www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice.
TG D35 / 649.015 (03.19)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>