DrayTek Vigor2765 Wired VDSL and Ethernet SoHo Router User Guide

DrayTek Vigor2765 Wired VDSL and Ethernet SoHo Router

Specifications

• Product Name : 35b Security Router
• Model Number : Vigor 2765
• Manufacturer : DrayTek Corp.
• Address : No. 26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan

Product Information

The Vigor 2765 is a security router designed for high-performance network security and reliability. It provides advanced features to ensure secure and stable internet connectivity for both residential and business users.

Safety Instructions
It is important to follow these safety instructions when setting up and using the router

• Read the installation guide thoroughly before setting up the router.
• Do not attempt to open or repair the router yourself; seek authorized personnel.
• Avoid placing the router in damp or humid locations.
• Operate the router within a temperature range of 0 to +45 Celsius.
• Avoid exposure to direct sunlight or heat sources to prevent damage to electronic components.
• Keep the router away from children and follow local regulations for disposal.

Usage Instructions

1. Connect the router to a power source using the provided adapter.
2. Connect your devices to the router using Ethernet cables or Wi-Fi.
3. Access the router’s settings through a web browser by entering the default IP address (usually 192.168.1.1).
4. Follow the on-screen instructions to configure your network settings, including SSID, password, and security protocols.
5. Save your configurations and restart the router for the changes to take effect.

FAQ

• Q: How do I reset the router to factory settings?
  

  • A: To reset the router, locate the reset button on the device, usually found at the back. Press and hold the reset button for about 10 seconds until the router restarts and restores to factory settings.

• Q: Can I update the firmware of the router?
  

  • A: Yes, you can update the firmware of the router by visiting the DrayTek website and downloading the latest firmware version compatible with your Vigor 2765 model.

Vigor2765
35b Series Router
Quick Start Guide

Version: 1.8
Firmware Version : V4.4.3.2
(For future update, please visit DrayTek web site)
Date: April 12, 2024

Intellectual Property Rights (IPR) Information

Copyrights
© All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders.

Trademarks
The following trademarks are used in this document

• Microsoft is a registered trademark of Microsoft Corp.
• Windows 7, 8, 10, 11 and Explorer are trademarks of Microsoft Corp.
• Apple and Mac OS are registered trademarks of Apple Inc.
• Other products may be trademarks or registered trademarks of their respective manufacturers.

Safety Instructions and Approval

Safety Instructions

• Read the installation guide thoroughly before you set up the router.
• The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to open or repair the router yourself.
• Do not place the router in a damp or humid place, e.g. a bathroom.
• Do not stack the routers.
• The router should be used in a sheltered area, within a temperature range of 0 to +45 Celsius.
• Do not expose the router to direct sunlight or other heat sources. The housing and electronic components may be damaged by direct sunlight or heat sources.
• Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards.
• Do not power off the router when saving configurations or firmware upgrades. It may damage the data in a flash. Please disconnect the Internet connection on the router before powering it off when a TR-069/ACS server manages the router.
• Keep the package out of reach of children.
• When you want to dispose of the router, please follow local regulations on conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we deem necessary tore- store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

Hereby, DrayTek Corporation declares that the equipment type Vigor2765 is in compliance with EU EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://fw.draytek.com.tw/Vigor2765/Document/CE/

• Product name : 35b Security Router
• Model number : Vigor2765
• Manufacturer : DrayTek Corp.
• Address : No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan

Hereby, DrayTek Corporation declares that the equipment type Vigor2765 is in compliance with The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI 2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No. 3032).
The full text of the UKCA Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/Vigor2765/Document/CE/

• Product name : 35b Security Router
• Model number : Vigor2765
• Manufacturer : DrayTek Corp.
• Address : No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
• Importer : CMS Distribution Ltd: Bohola Road, Kiltimagh, Co Mayo, Ireland

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device may accept any interference received, including interference that may cause undesired operation.

Caution
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

More update, please visit www.draytek.com.

*The external power supply used for each product will be model dependent.

External power supply (Power Adapter) information. For more update, please visit www.draytek.com.

Package Content

Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately.

The type of the power adapter depends on the country that the router will be installed. The maximum power consumption is 15 Watt.

Note
Remove the protective film from the router before use to ensure ventilation.

Panel Explanation

Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.

USB1~USB2| Connector for a USB device (for 3G/4G USB Modem or printer).
P1~P4| Connectors for local networked devices.
DSL| Connector for accessing the Internet.
I / O| Power Switch.
PWR| Connector for a power adapter.

Hardware Installation

This section will guide you to install the router through hardware connection and configure the router’s settings through web browser.
Before starting to configure the router, you have to connect your devices correctly.

Network Connection

1. Connect the DSL interface to the land line jack with a DSL line cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly.
3. Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.
4. Power on the router.
5. Check the ACT and DSL, LAN LEDs to assure network connection.

(For the detailed information of LED status, please refer to section 2.)

Wall-Mounted Installation
Vigor router has keyhole type mounting slots on the underside.

1. Drill two holes on the wall. The distance between the holes shall be 168mm.

2. Fit screws into the wall using the appropriate type of wall plug.

3. With the screws installed, the router can be slotted into place. Note
   The recommended drill diameter shall be 6.5mm (1/4”).

4. When you finished about procedure, the router has been mounted on the wall firmly.

Software Configuration

To access Internet, please finish basic configuration after completing the hardware installation. Here we take Vigor2765 as an example.
The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator.
Make sure your PC connects to the router correctly.

Note
You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of Vigor router 192.168.1.1. For the detailed information, please refer to the section – Trouble Shooting in the User’s Guide.

Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to ask for username and password. Please type “admin/admin” as the Username/Password and click Login.

Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard.

Note
The home page will change slightly in accordance with the router you have.

The first screen of Quick Start Wizard is entering login password. After typing the password, please click Next.

On the next page as shown below, please select the WAN interface that you use. If DSL interface is used, please choose WAN1; if Ethernet interface is used, please choose WAN2; if 3G USB modem is used, please choose WAN3. Then click Next for next step. WAN1, WAN2 and WAN3 will bring up different configuration page. Here, we take WAN1 (ADSL/VDSL2) as an example.

On the next page as shown below, please select the appropriate protocol according to the information from your ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next step.

PPPoE//PPPoA

1.  Choose WAN1 as WAN Interface and click the Next button; you will get the following page.
2. After finished the above settings, simply click Next.
3. Please manually enter the Username/Password provided by your ISP. Then click Next for viewing summary of such connection.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.

MPoA// Static or Dynamic IP

1. Choose WAN1 as WAN Interface and click the Next button; you will get the following page.
2. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection.
3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown.
4. Now, you can enjoy surfing on the Internet.

Customer Service

If the router cannot work correctly after trying many efforts, please contact your dealer/DrayTek for further help right away. For any questions, please feel free to send e-mail to “support@draytek.com”.

Bee aa Registered Owner
Web registration is preferred. You can register your Vigor router via https://myvigor.draytek.com.

Firmware & Tools Updates
Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.
https://www.draytek.com

References

• Home | DrayTek
• MyVigor - DrayTek
• Home | DrayTek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>