NITHO MLT-ADOB ADONIS Bluetooth Wireless Controller User Guide
- June 15, 2024
- NiTHO
Table of Contents
WIRELESS CONTROLLER
Model: MLT-ADOB
QUICK START GUIDE
SPECIFICATIONS
THANK YOU FOR BUYING NITHO .
WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS:
A. Full compatibility with PS3®, PS4®, PC, iOS® and Android®
B. It’s equipped with the latest motion sensing technology
C. The built-in three-axis gyroscope and three-axis accelerator can detect an
omnidirectional dynamic information including Roll, Pitch and Yaw
D. It’s also featured with a dual-point capacitive sensing touchpad
E. 3.5mm headset jack enables the audio chat
F. The frontal lightbar indicates the different players and connection,
glowing or lighting in different colours
G. High performance analog triggers
FEATURES
-
Buttons List:
N (Home), Share, Option, ↑, ↓, ←, →, ×, ○, 口, △, L1, L2, L3, R1, R2, R3, VRL, VRR, RESET. -
Supports : any version of PS4® and PS3® Console, Android® above v6.0, iOS above v13.3 and Windows 10/11
-
keeps connected up to 10 meter`s distance from the console
-
It’s equipped with a 6-axis sensor catching the controller`s movements
-
RGB LED lightbar
-
It supports the dual-point capacitive sensing touchpad
-
Equipped with 3.5mm stereo headset jack that enables the in-game chat
FUNCTION
-
PS4® CONTROLLER`S FUNCTIONS
-
SIX-AXIS DETAILS
X-AXIS acceleration directions: left→right, right→left
Y-AXIS acceleration directions: front→back, back→front
Z-AXIS acceleration directions: up→down, down→up -
SENSOR CALIBRATION
– Sensor calibration is automatic
-
SLEEP MODE
– switches to Sleep mode if it fails to connect with PS4®, PS3®, PC, iOS® and Android® or if it doesn’t receive any input for 30 minutes -
WIRELESS CONNECTION
1. Connect the USB data cable to and to the console
2. Press & Hold the “N” button, then the LED bar will light in single color
Note:
– To establish the connection between and the console, it is required a USB to Micro-B data cable
– After the first pairing, the data cable is no longer needed for any further pairing -
WIRELESS PC, IOS® AND ANDROID® CONNECTION
1. Activate the search mode on the Bluetooth® options on your device
2. Press & Hold the “N” button + “SHARE” , for few seconds untill the LED front bar starts to quickly blink
3. Press on your device “ Pair” to successfully connect the controller -
ADONIS TEST MODE ON PC
Follow the below instructions for the testing keys in Windows® 10
Connect to your computer through the Micro-B data cable, then follow the route:
PC → Start → Control Panel→ Device and Printer
Then:
Double click on “Wireless Controller”→ Properties
-
BUTTONS LAYOUT PS4®-PS3®-PC CORRESPONDENCE****
PS4®/ PS3®| PC
---|---
□| 1
×| 2
L1| 3
O| 4
△| 5
R1| 6
L2| 7
R2| 8
SHARE| 9
OPTION| 10
L3| 11
R3| 12
PS| 13
T-PAD| 14
SERVICE & SUPPORT
For any question and support request, contact us on
support@nitho.com or visit our website
www.nitho.com
NiTHO GmbH – Victoriastrasse 3b – 86150 Augsburg – Germany
SUPPORT@NITHO.COM
WWW.NITHO.COM NITHOGAMES NITHOGAMES
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>