LUMMIC Reaction and Intelligence Skill Games Installation Guide
- June 8, 2024
- LUMMIC
Table of Contents
LUMMIC Reaction and Intelligence Skill Games
WELCOME TO THE UNIVERSE OF LUMMIC
Read this user manual before use and please follow all of the instructions
therein Steps.
CHARGE BATTERIES
All LUMMICS must be in the “ON” position. To do this, stack all the devices on
top of each other and lay the magnetic wire on the bottom LUMMIC. If a light
does not light up, move the wire slightly until the connection is established.
Once a charge of 100% is reached, the light goes out.
Danger! Turn off the Lummics after charging off and on again before
linking to the app.
Always On
Included in delivery a USB charging cable, however no plug.
DOWNLOAD THE APP
Download the LUMMIC app to your phone. The app is available for both iOS and Android.
APPLICATION
After connection you can use different programs access or even create your own. There is infinity many possibilities. There are many in the app Original programs and an area for creation new programs based on 9 different ones parameters.
CONNECTOR
There are 4 different connectors that can be used to LUMMICS with different
surfaces depending on the game can be connected. The connectors are at the
Rear connected and rotated 90º:
- Fixing hook (Ø 25 mm)
- Suction cup
- Magnet
- Strap for attachment to the body (the magnet is inserted into the opening of the belt).
For more information visit our Website at www.lummic.com and download the app “LUMMIC” down. Any questions please contact support@lummic.com
MOUNTING HOOK
To be able to connect the LUMMIC to an ice ax.
SUCTION CUP
If you attach your LUMMIC to a smooth surface If you want to, clean them first.
MAGNET
If you attach your LUMMIC to a metal surface want to make sure it is smooth.
HARNESS FOR BODY MOUNTING
To wear the LUMMIC on your body, use it along with the magnet.
Customer Support
