CreatBot PEEK-300 High Performance PEEK 3D Printer Instruction Manual

CreatBot PEEK-300 High Performance PEEK 3D Printer

INSTRUCTION MANUAL

1. Direct Annealing Temperature: 0-400°C

Direct Annealing System (DAS), the world’s first and extraordinary technology by CreatBot. Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. (The technology is patent protected and available by CreatBot only)

2. Smart Auto-rising dual extruders 500 ℃

The PEEK-300 equiped with CreatBot new technology smart Auto-rising dual extruders. Water cooling, DAS system, Auto-rising extruders. The dual nozzle temperature up to 500°C. You can print any 3D printer materials in the world. We can say it is best choice of polymer materials.

3. Hotbed 200 ℃

Common but necessary.
Base of printing big models with no warping.

4. Hot Chamber 120°C

Outstanding and important.
The protector of no cracking printing.

5. Triple Heat Isolation

Triple heat isolation is made of double insulation chamber, advanced insulation materials and vacuum double PC boards. It is guarantee of ultra performance and safety.

6. Cooling System

Cooling system is one of the important parts to constitute the whole thermal system. It is made of
(1) liquid cooling. Circulating liquid can be used effectively for a long time.
(2) Air pump cooling. Air pump provide cold air from outside instead of hot air inside chamber.

7. HEPA Air Filtration

The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.

8. Resolution 0.04mm

0.04mm is an available resolution for normal plastics, but it is an extraordinary resolution for high warping and high deformation materials. 3D printing high performance material need not only high temperature, but better cooling. For high resolution with high small details, high temperature will ruin layers to a mess if heat and cooling are not in a balance.

9. Material Performance Comparison Chart

Product Parameter

Printing

Build Volume| 300300400 mm
Print Resolution| 0.04 mm-0.4 mm
Filament Diameter| 1.75 mm
Number of Nozzles| Dual Extruder
Print Speed| 10-150 mm/s
Nozzle Diameter| 0.4 mm (0.3~1.0 mm optional)
Filament Compatibility| Engineering Plastics: PLA, TPU, PC, ABS, PA6, PETG, PVDF, TPU High temperature Material: PPSU, PEI (ULTEM), PA12, PSU, PPS, PA-CF, POM, PP
| Ultra-performance material: Medical grade PEEK, PEEK, PEKK,
CF-PEEK (Carbon fiber), GF-PEEK (glass fiber), etc.
Software
Software Bundle| Creatware, Simplify3D, Cura, Slice3r
Operating Systems| Win7/8/10, MacOS
Print File Type| STL, OBJ, AMF, Gcode
Special Function
Outage Restored| Save data when power is off
Filament Detection| Pause printing when filament run out
Direct Annealing System (DAS)| Annealing process is instant controllable during printing. It aims to
provide best quality parts in one time without warping and cracking printing of big size functional materials.
Heat insulation| Triple heat insulation
Emergency stop switch| Support emergency stop
High temperature
accessories| High temperature resistance motors, linear rails, belts and circuits to
ensure long time high temperature printing.
Temperature
Nozzle Max. Temperature| 500 ℃
Chamber Temperature| 120 ℃
Platform Max. Temperature| 200 ℃
Direct Annealing Temperature| 0~400 ℃
Mechanical
Cooling| Air pump cooling & water cooling
Platform| PCB aluminum + PEEK print board
Positioning Precision| X Y axis 0.01mm, Z axis 0.0025mm
Extruder| Directly Drive
Machine Construction| Fully enclosed hot chamber
Bed Leveling| Manually/Automatic
Electrical
Input Power| 200~240 V, 120A
Max. Power| 3 000 W
Screen| 4.3” full color touch screen, multi-language
Print Method| USB Connectivity/USB Disk
Size & Weight
Machine Size| 650600750 mm
G.W| 100 kg
Packing Size| 8207201080mm
N.W| 135 kg

Specs Comparison With Other Brands

| CreatBot PEEK-300| Stratasys F370| Intamsys Funmat Pro410| Apium M220
---|---|---|---|---
Place of origin| China| USA| China| Germany
Build Volume
(mm)| 300300400| 355254355| 305305406| 170170130
Max Nozzle
temperature| 500 °C| 300 °C| 450 °C| 540 °C
Max Chamber
temperature| 120 °C| 90 °C| 90 °C|
Max hot bed
temperature| 200 °C| | 160 °C|
Temperature around the part is
controlled| 0-400 °C| None| None| 0-200 °C
Min layer
resolution| 0.04 mm| 0.013 mm| 0.05 mm| 0.1 mm
Number of
extruder| 2| 2| 2| 1
Build platform| Carbon fiber sheet| | Ceramic Glass| Medical grade
material
Materials| PEKK, PEEK, medical PEEK, Carbon-PEEK, ULTEM, PEI, PPSU,
PA/CF, PC, PA Alloys, PA6, PA12, ABS,
Carbon Fiber, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA,
TPU 65A,ETC.| PLA, ABS, ASA, PC-ABS, TPU 92A| PEEK,PEI,PPSU, PA/CF, PC, PC Alloys, PA, ABS,
Carbon Fiber-Filled, Metal-Filled,
Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, ETC.| Medical PEEK
Machine size| 650600750| 9647111
626| 7206801 470| 850685675
Weight| 120 kg| 227 kg (with
cabinet)| 200 kg (with cabinet)| 66 kg

FAQ:

Q: Can I use other filaments not listed in the compatibility chart?

A: It is recommended to use the specified filaments for optimal results and safety.

Q: How do I clean the HEPA air filtration system?

A: Follow the manufacturer’s instructions for cleaning and maintenance of the air filter system.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>