SEALEY HVD16C High Velocity Drum Fan Instruction Manual

SEALEY HVD16C High Velocity Drum Fan Instruction Manual

HIGH VELOCITY 230V WITH CORDLESS OPTION DRUM FAN 16” MODEL NO: HVD16C

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

ELECTRICAL SAFETY

WARNING! It is the user’s responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all
electrical products. If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested.
ELECTRICAL SAFETY INFORMATION: it is important that the following information is read and understood.

• Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power
• Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are

GENERAL SAFETY

• Disconnect the fan from the mains power when not in use and before servicing or performing any

• Use the fan in dry areas DO NOT use in wet or areas with high condensation such as showers, pools etc.

• WARNING! If the fan falls into water or any other liquid, immediately switch off and disconnect from the power
  DO NOT touch the fan until the power supply has been disconnected.

• Always disconnect the fan from power supply if moving from one location to another and ensure fan is stood on a level

• The fan air flow is Before use ensure that there is nothing nearby that will be damaged or displaced by the stream of air.

• Keep the fan clean and maintained in good

• Ensure battery is inserted with polarity

• Only use designated battery

û             DO NOT operate the fan where there are explosive or flammable gases, fumes or other hazardous substances.

û             DO NOT stand the fan on the power cable.

û             DO NOT operate fan without grill in place.

û             DO NOT handle power adaptor with wet hands.

û             DO NOT insert any objects through the fan guard.

û             DO NOT pull the power adaptor plug from the mains socket by the lead.

û             DO NOT get the power adaptor wet, or use in wet, damp conditions (for indoor use only).

û             DO NOT cover the fan when in use.

û             DO NOT immerse the fan in water or any other liquid.

û             DO NOT allow children to operate the fan.

û             DO NOT stand the fan where it may be knocked over or off a surface, or where the lead may cause a person to trip.

û             DO NOT use the fan outdoors.

û             DO NOT modify speed control or attempt to fit any additional external speed control device to the fan.

û             DO NOT try to take the power adaptor plug apart.

û             DO NOT allow supply terminals to be short-circuited.

û             DO NOT use power adaptor for any other product.

û             DO NOT place fan or batteries near fire or heat,

• When not in use place the fan in original box, or otherwise cover to protect from dust and store in a safe, dry, childproof
• If fan is to be stored or unused for a long period remove the
• WARNING! DO NOT use any other type of power adaptor with this product than the supplied power Failure to observe this

warning could result in injury and or fire and will invalidate the warranty.

• WARNING! Remove battery pack from appliance while being

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

INTRODUCTION

High velocity continuous variable speed drum fan able to move high volumes of air. Mains operated with option of increased versatility by purchasing 20V battery and charger, sold separately. 230V mains lead/transformer included. 360° tilt allows control of airflow to exactly where it is needed; fitted with rubber feet for extra stability. Carefully balanced and fully guarded aluminium blades provide a quiet and safe operation. Lightweight and robust unit with a carry handle for easy transportation. Suitable for use in industrial,commercial, agricultural, automotive workshop, showroom and home applications. Part of the SV20 series – Offering

a one battery fits all solution. For 20V operation order a 2Ah, 4AH or 6Ah 20V battery and charger; model numbers are CP20VBP, CP20VBP4, CP20VBP6 and CP20VMC. Up to 5hrs on one 6Ah battery.

SPECIFICATION

Model No:……………………………………………… HVD16C

Current:……………………………………………………….. 1.2A
Fan diameter:…………………………………………………. 16”
Maximum Airflow:…………………………… 46.7m³/min(1650cfm)
Power Supply Cable Length:…………………………… 1.8m
Power:………………………………………………………… 24W
Speed Range:………………………………… .. 580-1470rpm
Speeds:……………………… 1,Continuous Variable Speed
Supply:………………………………………………….. V / 230V

ASSEMBLY

• Assemble fan as shown in 1. To tighten fan at an angle use thumb wheels (fig.1.1, fig.1.3).
• Connect battery to unit (fig.2.A). See safety section for Note supply terminals (fig.2.B). Polarity is marked on the body.
• When using the mains supply, see safety section for Insert power supply cable to port on appliance (fig.2.D).

OPERATION

• WARNING! Ensure that you read, understand and apply safety instructions in Section 1 before using
• Check that the speed control is set to OFF and then plug into power supply or fit battery (fig.2) and switch the power
• To adjust the fan speed use the control knob on the Power Adaptor (fig.3)
• Adjust the direction of the air flow by moving from side to side and tilting the fan up or down as required (fig.1).
• Turn the speed control switch to OFF and disconnect the fan from mains power or remove battery pack after use (fig.2, 3).

MAINTENANCE

WARNING! Ensure that the fan is disconnected from the mains power supply before attempting any of the following:
Use a soft, damp cloth to clean the
DO NOT immerse the fan in water and never allow water to drip onto the motor housing. DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
To clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a slightly damp Replace the grille as required and refit the cross headed screws.
Should the motor, switch or the power lead require service or maintenance contact your local Sealey

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important : No Liability is accepted for incorrect use of this product.
Warranty : Guarantee is 12 months from purchase date, proof of which is required for any claim.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>