ICP DAS I-7018Z Thermocouple Input Module User Guide

ICP DAS I-7018Z Thermocouple Input Module User Guide

I-7018Z, M-7018Z Quick Start Guide

• Warranty
  All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year from the date of delivery to the original purchaser.
  

• Warning
  ICP DAS assumes no liability for damages resulting from the use of this product. ICP DAS reserves the right to change this manual at any time without notification. The information furnished by ICP DAS is believed to be accurate and reliable. However, no responsibility is assumed by ICP DAS for its use, or for any infringements of patents or other rights of third parties resulting from its use.
  

• **Packing List

**

• Internal I/O Structure

• Pin Assignments (CON1)

• Pin Assignments

• Wire Connections

• Modbus Table (M-7018Z only)

• DCON Protocol

If you want to know the detail DCON protocol, please check it from CD or web
CD path: \\napdos\7000\manual\
Web: ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7000/manual/

• Module test and configuration

Step 1: INIT switch Operation

1. Find out the INIT switch( back of the module), and turn to INIT.
2. Reboot the module

Step 2: Install & Run DCON Utility

1. Please Install DCON Utility first You can find the software in the CD. CD path: :\napdos\driver\dcon_utility\ Web link: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
2. Run DCON utility

Step 3: Set search configuration & search module

Step 4: Select Module for testing and configuration

Step 5: Configuration Settings & Channel Settings

Step 6: Change to normal mode and keep the settings

1. Turn the INIT Switch to Normal.
2. Reboot the module

• Trouble Shooting

Q1. How to do when forgot module address or baud rate?

Please turn to INIT mode, and run DCON Utility to search.
The module supports DCON protocol at the INIT mode.
And the address is 0. The communication setting is “9600,N,8,1”.

Q2. How to configure the I-7000 and M-7000 modules?

ICP DAS provide DCON Utility to configure I-7000 and M-7000 modules.
Please download the last version from: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/

Q3. What is individual channel configuration?
I-7018Z and M-7018Z provide the “individual channel configuration”. “Individual channel configuration” means the different settings of the input ranges for each channel. You can configure the modules by DCON utility

Q4. What is the CJC function?

CJC (Cold-Junction Compensation) offset is for the temperature measurement. You can set a CJC offset for all channels or different channel in DCON Utility,

Q5. How to programming with I-7000 or M-7000 by C#, VB, VC?

ICP DAS I-7000 and M-7000 series both support DCON protocol. And Only M-7000 series supports Modbus protocol.
For DCON protocol, please download SDK and Demo from:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_dll_new/
For Modbus protocol, please refer this web link:
http://www.icpdas.com/products/PAC/i-8000/modbus.htm

If there is any other question, please feel free to contact us. Email: [email protected]
Website: http://www.icpdas.com.tw/contact_us/contact_us.html

References

• ftp.icpdas.com - /pub/cd/8000cd/napdos/7000/manual/
• ftp.icpdas.com - /pub/cd/8000cd/napdos/driver/dcon_dll_new/
• ftp.icpdas.com - /pub/cd/8000cd/napdos/driver/dcon_utility/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>