SEALEY 9121L Super Grip Knitted Gloves Latex Palm User Manual
- May 14, 2024
- SEALEY
Table of Contents
SEALEY 9121L Super Grip Knitted Gloves Latex Palm
Specifications
- Model Numbers : 9121L, 9121L/12, 9121L/B120, 9121XL, 9121XL/12, 9121XL/B120
- Latex coating with poly cotton lining for superior grip in wet and dry conditions
- CE Marked and conforms to BS EN 388 :2016 2-1-3-1-X standards
- Notified Body : 0075,
- Type Examination Certificate Number: 0075/1022/162/11/18/2709
- Sizes available : 9121L (Large), 9121XL (Extra-Large)
Product Usage Instructions
-
Introduction
These knitted gloves with latex palms provide superior grip in both wet and dry conditions. The breathable open back design enhances comfort and the gloves offer enhanced tear resistance. They are CE marked and meet BS EN 388:2016 2-1-3-1-X standards. -
Safety
- Gloves should not be worn near moving machine parts.
- No harmful substances present that affect user hygiene or health.
- Levels of performance are valid for the palm of the glove only.
- Avoid contact with fire.
- Inspect gloves before each use and replace if damaged.
-
Applicable Standards
The gloves meet the following mechanical hazard standards:- Abrasion Resistance: 2
- Blade Cut Resistance: 1
- Tear Resistance: 3
- Puncture Resistance: 1
Maintenance
-
Inspection
Inspect gloves before each use and replace if damaged. -
Storage
- Store gloves in their original packaging.
- Maintain normal temperature and humidity conditions for storage.
- Keep gloves in clean, covered, and ventilated premises.
-
Obsolescence
Performance will not be significantly affected by aging when stored appropriately.
FAQ
-
Q: Can these gloves be used for handling sharp objects?
A: Yes, these gloves offer blade cut resistance according to EN 388:2016 standards. -
Q: How should I clean these gloves?
-
A: These gloves are not machine washable. Hand wash with mild soap and water, then air dry.
-
Q: Are these gloves suitable for use in extreme temperatures?
-
A: These gloves are designed for normal temperature conditions and may not perform optimally in extreme temperatures.
SUPER GRIP KNITTED GLOVES LATEX PALM
MODEL NO: 9121L, 9121L/12, 9121L/B120, 9121XL, 9121XL/12, 9121XL/B120
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
- REFER TO INSTRUCTIONS
- IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
Latex coating with poly cotton lining gives superior grip in wet and dry conditions. Breathable open back. Enhanced tear resistance. CE Marked and conforms to BS EN 388:2016 2-1-3-1-X.
- Notified Body : 0075
- Type Examination Certificate Number: 0075/1022/162/11/18/2709
- Carried Out By : CTC
SAFETY
- Gloves should not be worn when there is a risk of entanglement by moving parts of machines.
- This model does not contain any substances at levels that are known to, or suspected to, adversely affect user hygiene or health.
- The protection against risks or hazards which are not mentioned in this document is not warranted.
- The levels of performance mentioned are only valid for the palm of the glove.
- These levels of performance are obtained from the tests done according to the conditions defined by the applicable standards.
- This glove shall not be in contact with fire.
- Before use, the glove shall be visually controlled. In case of deterioration the gloves must be scrapped (abrasion, cut, tear, …).
- For gloves with two or more layers of material, the performance levels are warranted only for the whole glove.
- For gloves with two or more layers the overall classification does not necessarily reflect the performance of the outermost layer.
- Sizes: 9121L (Large), 9121XL (Extra-Large)
APPLICABLE STANDARDS
| Mechanical Hazard
EN 388 : 2016
| Abrasion Resistance| 2| (on 4 maxi)| ‘X’ indicates that the glove has not
been submitted to the test or the test method appears not to be suitable for
the glove design or material.
---|---|---|---|---|---
Blade Cut Resistance| 1| (on 5 maxi)
Tear Resistance| 3| (on 4 maxi)
Puncture Resistance| 1| (on 4 maxi)
Cut Resistance Method (EN ISO 13997)| X| (A to F)
Impact Protection| –|
MAINTENANCE
-
MAINTENANCE
The gloves should be inspected before each use, and replaced if damaged. -
STORAGE
- Store the gloves in their original packaging.
- Store the gloves in normal temperature and humidity conditions.
- Store the gloves in clean, covered and ventilated premises.
-
OBSOLESCENCE
When stored in appropriate conditions, performance of this product will not be significantly affected by aging.
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
- Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
- Important: No Liability is accepted for incorrect use of this product.
- Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
EU Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68
Ireland
UK Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds,
Suffolk. IP32 7AR
- 01284 757500
- sales@sealey.co.uk
- www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
9121L, 9121L/12, 9121L/B120, 9121XL, 9121XL/12, 9121XL/B120 Issue 1 28/11/23