HANEVEAR H100-MAX 20 Inch Fat Tire Electric Bike Instruction Manual

HANEVEAR H100-MAX 20 Inch Fat Tire Electric Bike

Product Information

Specifications

• Power Supply: 36V/48V/52V
• Display Rated Current : 15mA
• Display Maximum Current : 30mA
• Shutdown Leakage Current

Product Usage Instructions

How To Start

1. Take the H100 electric bike battery out of the package.
2. Insert the battery into the body according to the instructions, and use the key to lock and fix the battery.
3. Expand the H100 electric bicycle and fix the frame.
4. Fix the handlebar, seat, and mirror.

Operating Part
The operating part includes various functions:

• Headlight switch
• Single motor/dual motor switching
• Turn signal
• Horn
• Hydraulic brake
• +’-‘ i’ ‘ ON/OFF
• Yonlin display
• Shimano-7s
• Accelerator
• Hydraulic brake

Display Operation Manual

1. PRODUCT NAME AND MODEL NUMBER: Smart LCD display for electric bicycle; Model: YL91F-V.
2. SPECIFICATION: Refer to the specifications section above.
3. APPEARANCE: Describes the physical appearance of the display.
4. FUNCTION OVERVIEW AND FUNCTIONAL AREAS: Details the different functions available on the display.

Maintenance
Follow the maintenance instructions provided in the user manual to ensure optimal performance and longevity of your electric bike.

Precautions

• Battery and Charging: Follow recommended charging procedures to maintain battery health.
• Riding: Adhere to safety guidelines while riding the electric bike.
• Return: Follow the return guidelines provided by the manufacturer in case of any issues.

Contact Us
You can reach us through our website, Facebook page, WhatsApp, or Amazon for any queries or assistance.

FAQ

What should I do if I encounter issues with my electric bike?
If you face any problems, please contact us through the provided channels for support and assistance. Do not hesitate to reach out for help.

Contact Us

• FACEBOOK E-BIKE HANEVEAR
• WhatsApp +86 15324407209
• Amazon

1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed.
5. Select Contact seller.  

*If you have any comments about products, accessories, and additional purchases, please contact us through the above methods, please give us a chance to deal with the problem, and don’t give bad reviews without thinking. Thank you very much for your understanding

Precautions

Battery and Charging:
The charging temperature is 0°C-45°C, the discharging temperature is -20°C-60°C, keep the battery dry. Do not place batteries in acidic or alkaline liquids. Avoid rain, keep away from fire, high temperature and high temperature environment. It is strictly forbidden to reversely connect the positive and negative poles of the battery. Do not damage, disassemble or short-circuit the battery. Please use the special original charger to charge, and the charging time should not exceed 6 hours. When not in use for a long time, please store the battery in a cool and dry place, and charge it for five hours per month. The user must operate according to the requirements of the manual when charging, otherwise the consequences will be at their own risk. Pay attention to the battery types and applicable voltages that can be charged by the charger, and mixing them is strictly prohibited. When charging, it should be placed in a ventilated environment. It is strictly forbidden to charge in residential buildings, closed spaces, or in sunlight or high temperature environments. When charging, first plug in the battery, and then connect to the power socket; after fully charged, first cut off the socket, and then unplug the battery. When the green light is on, the power should be cut off in time, and it is forbidden to connect the charger to the AC power without charging for a long time. During the charging process, if the indicator light is abnormal, there is a strange smell, or the charger shell is overheated, stop charging immediately, repair or replace the charger. During the use and storage of the charger, care should be taken to avoid the entry of foreign objects, especially water or other liquids, to avoid short circuits inside the charger. The charger should not be carried with the bike as much as possible. If it is necessary to carry it, it should be placed in the tool box after the shock absorption treatment is completed. Do not disassemble or replace the accessories in the charger by yourself

Riding:
Please read the instructions carefully and understand the performance of the product before using it; don’t lend it to someone who can’t operate the product to ride. Before riding the bicycle, check whether the brakes are normal. When braking, activate the rear brake first, then the front brake. Pay attention to the tightness of the brakes. If the brake is too loose, tighten it with an Allen key. When riding in rain or snow, pay attention to increasing the braking distance. Suitable age: Riding ages 16 to 75. When riding a bicycle, please be sure to wear a safety helmet, obey the traffic rules, and do not drive on motor vehicle lanes and roads with many pedestrians. Check tire pressure before riding. Riding with more than the maximum load on the body is not allowed (maximum load is 120 kg). After using the bicycle, it is not allowed to park in the lobby of the building, evacuation stairs, emergency exits,

Return：

1. Please keep the outer packaging for a certain period of time after receiving the goods to avoid returns.
2. Please ensure that the product is in the same state as when it was shipped.
3. If the return is caused by the buyer himself, the buyer shall bear the round-trip freight.
4. Please make sure that all the main body and gifts are included in the package.
5. We will only refund after receiving the package at the warehouse.
6. If there are transportation problems such as scratches during the return transportation, the buyer shall bear the responsibility.
7. HANEVEAR has the final right to explain the return of the electric bicycles it sells.

Maintain:

• The company reserves the right to modify and interpret the product models, specifications or related information mentioned in this manual;
• The functions of a specific model mentioned in this user manual are only applicable to that specific model;
• The product models, specifications or related materials mentioned in this user manual are subject to any modification or change without prior notice;
• Without the prior written permission of the company, the content of this manual cannot be copied, modified, reproduced, disseminated or published in any form. Please read this manual carefully before using the product, and operate according to the manual. Otherwise, the company will not be responsible for product damage or personal or property loss due to improper use or mistakes.

Product Parameters

How To Start

1. Take the H100 electric bike battery out of the package.

2. Insert the battery into the body according to the instructions, and use the key to lock and fix the battery.

3. Expand the H100 electric bicycle and fix the frame.

4. Fix the handlebar, seat and mirror.

Operating part

1. headlight switch
2. Single motor/dual motor switching
3. Turn signal
4. Horn
5. Hydraulic brake
6. ‘+’
7. ‘-’
8. ‘i’
9. ‘ ’
10. ON/OFF
11. Yonlin display
12. Shimano-7s
13. Accelerator
14. Hydraulic brake

Product Name and Model Number

Smart LCD display for electric bicycle; Model: YL91F-V.

Specification

• 36V/48V/52V power supply
• Display rated current 15mA
• Display maximum current 30mA
• Shutdown leakage current <1uA
• Supplied current to the controller 50mA
• Operating temperature -20～60℃
• Storage temperature -30 to 70°C

Appearance

Function overview and Functional areas

Functional overviewThe YL91F-V display offers a variety of features to suit your riding needs, including:

• Battery level indicator
• Pedal assist (PAS) level indicator
• Speed (current speed, maximum speed, average speed)
• Mileage display (single and total mileage)
• Walk boost mode
• Light ON/OFF
• Error code indicator
• Motor power indicator (optional)
• USB connection indicator (optional)
• Cruise control indicator (optional)
• Bluetooth connection indicator (optional)
• Personalized parameter settings (e.g. wheel diameter, speed limit, battery power setting and PAS parameter setting, password setting, controller current limit setting, etc.).
• Factory default parameter recovery function

Functional areas

Button definitions
The YL91F-V display is equipped with five buttons on the corresponding operating unit: power on/off , plus , minus , light , and toggle .

Routine operation

Power on/off
Long press to power on/off the display. When the display is off, it will not use the battery power and the leakage current is less than 1uA.
The display will automatically shut off if it is not used for more than 10 minutes.

Display interface switching
When the display is powered on, it will show the Current Speed (km/h) and Odometer (km) by default. Short press to switch between Odometer (km), Trip Odometer(km), Maximum Speed (km/h), and Average Speed (km/h).

Walk boost mode
Long Press and hold , the electric bicycle enters the walk boost mode. The electric bicycle will walk at a fixed speed of 6 km per hour and the display shows . Release the button to stop the power output immediately and restore it to the state before the walk boost.

The walk boost mode can only be used when pushing the electric bicycle, please do not use it while riding.

Turning on/off lights
Press the to make the controller turn on the lights and the display backlight becomes dim. Press again to make the controller turn off the lights and the backlight restores brightness.

PAS level selection
Press / to switch the PAS level of the electric bicycle, thus changing the motor output power.

Battery level display
The Battery level is shown as 5 bars. When the battery is fully charged, all of the 5 bars lighten up. When the battery is fully depleted, the bar will begin to flash, warning the user to charge the battery as soon as possible

Error code display
If there is a fault occurs in the electronic system of the electric bicycle, the display will automatically show an error code, see Schedule 1 for a detailed definition of the error code.

When the error code appears on the display, please troubleshoot the problem in time, the electric bicycle will not be able to drive normally after the problem occurs.

Personalized parameter settings

Each setting needs to be done with the bicycle stationary.
The personalized parameter setting procedure is as follows:
When the display is ON and the speed shows 0

1. Press and hold   simultaneously for more than 2 seconds to enter the personalized parameter setting interface.
2. Press / to toggle between the personalized parameter setting interface, and press to enter the parameter changing state.
3. Press / to select the parameter, long press for addition operation, long press for subtraction operation.
4. Press to save the parameter settings and return to the personalized parameter setting interface.
5. Long Press to save the parameter settings and exit the personalized parameter setting interface.
   The following options are available on the personalized parameter setting interface:

Metric and Imperial setting

• P1 is the metric and imperial setting, 00 for metric and 01 for imperial.
• Press to enter the parameter-changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Rated voltage setting

• P2 is the rated voltage setting. The available rated voltage range is: 24V, 36V, 48V, 52V.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

PAS level setting

• P3 is the Pedal assist (PAS) level setting. The available Pedal assist level settings are: 0~3, 1~3, 0~5, 1~5, 1~7, 0~7, 0~9, 1~9.
• Press to enter the parameter-changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Wheel diameter setting

• P4 is the wheel diameter setting. The adjustable wheel diameter range is 1~50inch.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Number of speed sensor magnets setting

• P5 is the speed sensor magnet number setting. The adjustable speed sensor magnet number range is: 1 ~ 100 pcs.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Speed Limit Setting

• P6 is the speed limit setting. The adjustable speed limit range is: 1~100km/h. (The maximum adjustable speed limit varies by different protocols)
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Start-up setting

• P7 is the start-up setting. The display can choose the following start modes: 00→zero start, 01→non-zero start.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Drive mode setting

• P8 is the drive mode setting. The available drive modes are: 00→Pedal assist only, 01→Electric only, 02→Both Pedal assist and electric.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Pedal assist sensitivity setting

• P9 is the pedal assist sensitivity setting. When set to higher numbers, it will take more crank rotations to activate the motor. On lower numbers, it will take little crank rotation to activate the motor. The adjustable range is: 1~24.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Pedal assist strength setting

• PA is the Pedal assist strength setting. The Pedal assist strength is the relative strength of the PWM signal from the controller when start to activate pedal assist. The adjustable range is 0 ~ 5. 0 is the weakest strength and 5 is the strongest.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Number of pedal assist sensor magnets setting

• Pb is the number of pedal assist sensor magnets setting. The adjustable range: 1~15 pcs.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Controller Current Limit Setting

• PC is the controller current limit setting. The adjustable range is: 1~50A.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Battery under voltage value setting

• Pd is the battery under voltage setting. The value can be adjusted based on the current rated voltage.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Power-on password setting

• PE is the power-on password setting. The power-on password is not activated by default but users can activate it by setting PSd-y. The factory default password is 1212. Users can set other four-digit password. Please keep the password in mind after changing it, otherwise you will not be able to use the display.
• Press to enter the parameter changing state. Press the / to select the parameter.
• PSd-y means the power-on password is activated while PSd-n is off. Press to confirm the mode and enter the state of setting the four digits power-on password or exit to the personalized parameter setting interface.

• In the password setting mode, the adjustable digit will flash. Press the / to select the parameter and press to save the numbers and go to the next digit setting. Long press to  save the parameter setting and return to the personalized parameter setting interface after finishing setting the four digits in turn.

Auto Sleep Time Setting

• PF is the auto sleep time setting. To save the battery power and reach higher range, this display will be turned off after it has not been used for a time. The adjustable range is: 1~60min, 00 means no auto shutdown. The factory default setting is 10 minutes.
• Press to enter the parameter changing state. Press the / to select the parameter and press to save the parameter setting and return to the personalized parameter setting interface.

Shortcut operation

Restore factory settings operation

• dEF is the restore factory default parameter settings. dEF-Y is to restore the factory default settings, and dEF-N is not to restore.
• Enter into the main setting interface and keep the speed at 0, press and hold and  simultaneously for 2s to enter the restore factory default setting interface.
• Pressing / to toggle to dEF-Y. Then after pressing to confirm, the display will show dEF-0 for a few seconds and then automatically start to restore the factory default settings.
• The display will automatically exit to setting interface after the restoration.

Trip odometer reset operation

• The display can record trip odometer and odometer. Trip odometer is not automatically reset after turning off. The trip odometer needs to be reset manually. The odometer can not be reset.
• Enter into the main setting interface and keep the speed at 0, press and hold and simultaneously for 2s to reset the trip odometer. The main interface will flash during the reset process.

Quality Assurance and Warranty

Warranty info
Yolin will offer a limited warranty for any failure caused by the product defects under normal use during the warranty period.

Warranty does not cover

• The shell is opened.
• The connector is damaged.
• Scratches on the appearance after the product is out of factory.
• Scratched or broken wires
• Failure or damage caused by force majeure (e.g. fire, earthquake, etc.) or natural disaster (e.g. lightning strike, etc.)
• Out of warranty period.

Wire connection diagram

Standard wire connection sequence

Precautions

Pay attention to all the general operating when using the products and do not plug and unplug the display while it is powered on.

• Avoid bumping the display as much as possible.
• Please do not change the parameter settings at will, otherwise normal riding cannot be guaranteed.
• If display does not work properly, please send it to the repair center as soon as possible.
• There may be differences between the physical products and this manual due to normal upgrade. Please refer to the physical products.

References

• HANEVEAR E-Bike Europe | Best Fat Tire Electric Bikes – HANEVEAR-EBIKE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>