CrEatBot D1000 Professional Large Volume 3D Printer User Manual

CrEatBot D1000 Professional Large Volume 3D Printer

CreatWare Installation

Download CreatWare installation package from www.creatbot.com, follow the prompts to install the software, try using the default installation path as well.

Configuration Wizard

• CreatBot FDM : Select your p [1] rinter model from the list.
• Filaments [2] : Select filament from the list. If need to print other filaments not listed, such as PVDF, Ultem, etc. Select a similar filament first, then change settings in the software, save.

User Interface

1. Opens detailed settings of print, filament, and printer
2. Add models into CreatWare
3. Delete models from CreatWare
4. Move, Scale, Rotate, Place on plate
5. Model preview
6. Right-click on the model opens a context menu
7. Switch between 3D editor and layers preview
8. Switch between Simple / Advanced / Expert mode
9. Profile selection
10. Filament selection
11. Printer selection
12. Slice and generate G-code

View

Import Model

Import model

• Click the “Add” (Ctrl+I) button to import the models. (STL, obj,amf files)

Arrange

• Click the “Arrange” (Shift+A) button to auto-arrange the models.

Scale

• Click “Zoom” (S), you can see a contour line around the model. Drag the outline to adjust Size of the current model. You can input the value of the zoom ratio in Scale X / Y / Z , or directly enter the size you need.

Rotate

• Click ” Rotate ” (R), you can see three ting line around the model, respectively along the X,Y,Z directions. Drag the pointer to rotate the desired angle. You can also enter a value in the lower right corner.

Place on face

Click” Place on the face(F)“， multiple white planes will appear on the model. Clicking on any of the white planes will align that plane with the print bed.

Slicing Operation

Parameter Modes

Slicing Step

• Step 1: Select print settings. Three print settings are provided by default, Standard, Quality, Speed. You can also change each setting according to your needs.
• Step 2: Select filament.
• Step3: Select printer.
• Step4: Click “slice now”

Preview / Export

Preview G-code file: Drag the right indicator bar [1] to preview the layer height and printing status of each layer; drag the lower indicator bar [2] to view the specific information of each layer in detail. Each feature can be viewed in the upper left corner [3]. You can also view other printing parameter information, such as temperature, speed, layer height, line width, etc.

Export G-code: Click Export G-code[4], save the G-code to the U disk, insert the U disk into the printer port, select the file and start printing.

Common Settings

Extruder

1. Nozzle diameter[1]: The default size is 0.4mm. If you use a large-size nozzle, the extrusion of the filament will multiply and need to increase the printing temperature.
2. Retraction [2]: Direct drive extruder (such as F430, PEEK-300, D600Pro), the default retraction distance is 2mm (within 3mm); in Bowden extruders (such as DX, DE), the default retraction distance is 4 -5mm. If the retraction distance is too small, will leave some strings, you can increase the retraction distance. If the retraction distance is too large, the printing time will be affected.

Layer

1. Layer height[3]: The most important parameter that determines print quality. Generally set to half of the nozzle diameter, taking into account the printing speed and quality. When the nozzle diameter is 0.4mm, it is recommended to use 0.1mm for high precision and 0.3mm for high speed.
2. First layer height[4]: It refers to the height of the first layer of printing, generally greater than 0.2mm. This parameter can compensate the errors of the platform and make the model stick to the platform better.
   First Layer Flow Ratio: the extrusion amount of the first layer. A slightly larger extrusion will make the model stick more firmly to the platform.

Layer height range

Speed

Speed[5]: Speed affects the surface quality of the model . The faster the speed, the lower the print quality. The recommended printing speed is 40-60mm/s. If the printing speed is increased, the temperature of the nozzle needs to be increased to ensure that the filament can be extruded smoothly.

Change printing settings[6]: After changing the printing parameters, click save and customize the name for future use.

Skirt and Brim

1. Skirt[7]: It is mainly used to confirm the printing area and check whether the nozzle is extruded normally.
2. Brim[8]: Print a series of concentric lines around the model to increase the adhesion between the model and the platform.

Support

1. Support[9]: Add support to the overhanging area of the model. Note: The smaller the angle of support, the less support. Set to 0 to automatically detect and add support.
2. Raft[10]: Creates a raft below the part that can help with adhesion and provide a clean level surface to begin the print.

Support type: ①Support on the build plate only, ②For support enforcers only, ③Everywhere

1. For support enforcers only： Left-click to paint the position where support needs to be added.
2. Top/Bottom interface layer[11]: The number of layers of dense support. It will only exist in layers close to the surface of the model, printing a uniform surface between the object and the support material. This increases the contact area between the model and the support to prevent sagging, and makes the support contact surface smoother after the support is removed. It is recommended to enable this feature.

Temperature
Temperature[12]: Nozzle temperature refers to the melting temperature of the filament, PLA is 210° C. The hotbed temperature refers to the temperature of the heating plate during printing, and the PLA is 45°C. Chamber temperature refers to the temperature of the printer chamber. PLA does not need this setting, it only needs to be turned on when printing PC, PEEK and other materials. Refer to the filament temperature data sheet.

Save filament settings[13]: If you want to use different filaments with the preset parameters, you can click this button to save the changed parameters and change the name.

Filament temperature data sheet

Parameter

Filament

| Print Temperature(℃)|

Hot Bed（℃）

|

Hot Chamber(℃)

| Cooling Fan
---|---|---|---|---
PLA| 190-220| 40-60| N/A| ON
ABS| 240-260| 80-100| N/A| LOW/OFF
TPU| 210-230| 40-50| N/A| ON
PETG| 230-250| 80| N/A| LOW/OFF
HIPS| 230-250| 110| N/A| OFF
ASA| 260-270| 90-110| 50| LOW/OFF
PC| 270-290| 90-110| 50| OFF
PAHT| 280-320| 70-80| N/A| LOW/OFF
PAHT-CF| 300-320| 70-80| N/A| OFF
PAHT-GF| 280-320| 70-80| N/A| OFF
S-Blue| 280-300| 60-120| N/A| OFF
S-PAHT| 280-300| 60-100| N/A| OFF
PEEK| 400-450| 120-150| 70-120| OFF
PEEK-CF| 400-450| 120-150| 70-120| OFF
PEEK-GF| 400-450| 120-150| 70-120| OFF

Import Config

Click File-Import-Import Config to quickly import the configured.

Dual-Extruder Print

Calibrate X/Y Offset
The printer’s dual nozzles are offset, and the software has provided default values. However, there is a slight error in the assembly process of the nozzle, so the color of the model may not be aligned when printing. At this time, we need to recalibrate the offset value of the nozzle. For example, the default nozzle offset value of F430 is X73, Y0.

First, download the dual head alignment model Download-CreatBot

• Click the extruder icon to define the number o [1] f extruder, then slice and print.

• When printing the result as shown below, the offset value should be adjusted to X73.3 , Y0.3

• When printing the result as shown below, the offset value should be adjusted to X 72.7 ,Y-0.3

Main object+support
Select perimeter/infill/soild infill to use extruder 1, support/raft/brim to use extruder 2.

In the preview interface, you can view the weight of the main object and support filaments.

When printing with dual extruders, in order to catch the extra oozing from idle extruder, it is recommended to use the wiper tower [2] (Print Settings – Multiple Extruders – Wipe Tower) or use the draft shield [3] (Print Settings – Skirt and brim – Skirt – Draft shield).

Dual-Color Printing
The files must be two models in the same coordinate system.

There are three ways to import files:

1. Drag all STL files into CreatWare at the same time
2. Select File – Import and select all STL files at once
3. Click the “Add” [4] button to select all STL files at once.

After importing the model, click Yes, and the two models will be automatically merged together.

Set the number of nozzles to be used for each part separately, and install different color filaments on the printer to print.

Henan Creatbot Technology Limited

• Tel ：0371-55691230
• Skype ID : creatbot
• Website：www.creatbot.com
• Email：sales@creatbot.com support@creatbot.com
• Address：6#, Chaoya Industry Park, Hanghai Road, No.13 Ave., Eco-Tech Development Zone, Zhengzhou City, Henan Province, China

References

• large-scale & High performance 3D printers | CreatBot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>