MOTORBUDDY T01 Multi Functional Vehicle Emergency Fire Rescue Hammer Instruction Manual
- June 17, 2024
- MOTORBUDDY
Table of Contents
Multi Functional Vehicle Emergency Fire Rescue
Equiment
Instruction Manual
Product parameters
Lamp beads: 10WLED+10 white light SMD+5 red light SMD+5 blue light SMD
Dimensions: head 45mmx tube body 32mmx tail 33mmx length 200mm
Mode: Headlight (Strong light, weak light and flash)
Side light (white light strong light-low light, red and blue flashing)
Material: Aluminum alloy Battery specifications: Built-in 18650 battery
Lighting distance: 300 meters from the headlight Charging method: Mirco USB
charging interface
Product weight: 251 grams Maximum brightness: 200 lumens
Lighting time: front light (3-6 hours) side light (3-7 hours)
Product analysis
Product usage
Features
-
The headlights are full-on and half-on-one flash mode adopts American Cree 10WLED with a range of 200 meters.
-
The side white light uses 10 2835 SMD LEDs. When a single 0.2W, 10 full 2W (with full-light and half-light mode) side lights work, part of the LED light energy can be directly converted into electrical energy and recycled.
10 red 2835 SMD LEDs are used for side red light. Wavelength 620-625 (with flash and slow, for two modes -
The left side of the head is equipped with a high-hardness alloy safety hammer, which can easily break the window glass.
-
The right side of the head is equipped with a cutter. Can easily cut off safety and bring escape in emergency
-
The head is equipped with strong magnetism. Can be easily adsorbed on the car’s outer wall or iron parts, easy to use.
-
Using 5V 50mA monocrystalline silicon solar panel. Can charge the built-in battery.
-
The international Android charging interface on the side can charge the built-in battery
-
The flashlight has a USB output function, which can charge mobile phones and other digital devices when going out
Product instruction
This product 6 mode light function switching instructions:
- Main light 3 mode: 100% brightness-50% brightness-flash, long press for 3 seconds to switch to side light mode.
- Side light white light 2 mode: 100% brightness-50% brightness, Press and hold the switch for 3 seconds to switch the side red and blue light mode.
- Alarm horn function: long press the horn switch to turn on the alarm mode
Charging instructions:
The indicator light is red when charging. The green light turns on when
fully charged. The green light turns on when the mobile power is being used to
charge the phone. The green light turns off when the flashlight is low. The
flashlight is in a protected state, At this time, the flashlight can still be
used for more than half an hour. But the brightness drops to 30% of normal
brightness, please charge in time.
Warranty card
Customer name| | Contact number|
---|---|---|---
User address|
Product name| | Product number|
Dealer| | Purchase date|
Maintenance
records|
Warranty Regulations
-
From the date of purchase, within 15 days of this product, the normal use results in no light, you can use the valid invoice and valid receipt to exchange the same model for free.
Second, if there are the following situations, it is not within the scope of free replacement and warranty; 1 Products beyond the free warranty date. -
Man-made damaged products, scratched, deformed, parts dropped etc.
-
Disassembled or modified products withooduct number:ut permission.
-
Damage caused by accidents, misuse or irresistible natural factors in any way. three, This product can be guaranteed free for 1 year from the date of purchase.
Product certification
This product is approved to leave the factory after inspection
Poduct number:| TO1
Date of manufacture:|
Inspectors:| Check06
Product grade:| First grade