CreatBot F430 Professional Desktop 3D Printer User Manual

CreatBot F430 Professional Desktop 3D Printer

Specifications

• Print Technology: Fused Deposition Modeling (FDM)
• Build Volume : 400300300 mm
• Number of Nozzles: Double
• Resolution: 0.04 mm
• Layer Resolution: 0.02 mm
• Filament Diameter: 1.75 mm
• Filament Compatibility: PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.
• Nozzle Diameter : 0.4mm (0.3, 0.5, 0.6, 0.8, 1.0mm)
• Print File Type: STL, OBJ, AMF, Gcode
• Speed : Best Printing speed at 55 mm/s, Max. Printing speed at 180 mm/s
• Electrical Power Requirements: 100-240V, 50-60Hz
• Max. Power : 1,500 W
• Screen : 4.3” Touch Screen
• Control Chip : ATmega 2560
• Storage Media : U Disk, USB
• Connectivity: USB
• Special Function: Outage Restored, Filament Detection, Automatic Shut-down

Product Usage Instructions

• Support 420°C Hotend

  • We are the first one to publish 420°C high-temperature nozzle to 3d printer market since year of 2016, now it is the 4th new tech version.
  • F430 equiped with dual extruders, The left 260°C hotend is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right 420°C hotend is made of martensite steel, which is able to print High performance material like PEEK, ULTEM, etc.
  • The dual hotend is replaceable, which provide more possibility on your application.

• High Precision & High Speed

  • We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.
  • Precision up to: 0.04 mm Speed up to : 120 mm/s

• Stability

  • The whole-steel body not only ensure stability when printing, but also extend the usage period greatly.
  • Its optimization and cooperation of overall structure ensure sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 9 years and more than 30,000 hours.

• Fully Enclosed+Hot Chamber 70°C

  • Fully enclosed chamber can block all external interference and reduce noise.
  • Hot chamber device provide a constant room temperature 70°C,which is able to prevent prints from warping and deform.

• Outage Restored & Filament Detection

  • The printer will automatically memorize the current position and save print data.
  • Lower the platform and withdraw the filament when the power off suddenly. It will continue to print from the last stopped point after power’s on.
  • The printer will avoid invalid printing by stoping print and warning when filament runs out.

• Touch Screen
  The printer has an all-English-menu touch screen which is easy – – Operate and friendly use. One key to warm,one key to print as well as many other shortcut keys.

• Platform

  • Glass-Ceramic Platform + Carbon Fiber Sheet
  • The printer has a heatable glass-ceramic platform and a carbon fiber sheet coverd.
  • Glass-ceramic have hight thermal efficiency and best low-expansion coefficient, so it don’t deform when heating and cooling.
  • Carbon fiber sheet is tough and removable. Heat can be deliver efficiently. Most materials can be extruded and stuck to bed very well.

• Air Filter System
  The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.

• Automatic Leveling Platform
  BLtouch smart version use of 25 points, use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

Technical Specs

Printing

Print Technology| Fused Deposition Modeling（FDM）
Build Volume| 400300300 mm
Number of Nozzles| Double
Resolution| 0.04 mm
Layer Resolution| 0.02 mm
Filament Diameter| 1.75 mm

Filament Compatibility

| PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA,

PEEK, etc.

Nozzle Diameter| 0.4mm (0.3 0.5 0.6 0.8 1.0mm)
Print File Type| STL, OBJ, AMF, Gcode
Speed
Best Printing speed| 55 mm/s
Max. Printing speed| 180 mm/s
Electrical
Power Requirements| 100-240V, 50-60Hz
Max. Power| 1 500 W
Screen| 4.3” Touch Screen
Control Chip| ATmega 2560
Storage Media| U Disk
Connectivity| USB
Special Function
Outage Restored| Save data when power is off
Filament Detection| Pause printing when filament run out
Automatic Shut-down| Turn off the power automatically when printing is complete
---|---
Temperature
Ambient Operating

Temperature

|

15 ℃~32 ℃

Max. Nozzle Temperature| 420 ℃
Max. Bed Temperature| 140 ℃
Max. Chamber

Temperature

|

70 ℃

Mechanical
Construction| Power-Coated Steel, Aluminum Casting for Motion Components
Build Plate| Glass Ceramic Panel
Build Plate Leveling| Automatic
Extruder| Directly Drive
Stepper Motors| 1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision| 12.7 μm
Z Positioning Precision| 1.25 μm
                                                   0
Software Bundle| CreatWare, Simplify 3D, Cura, Slice 3r, etc
Supported File Types| STL,OBJ,AMF
Operating Systems| Win7/8/10, MacOS
Size & Weight
Product Dimensions &

Weight

|

620485680 mm 48 kg

Packing Size & Weight| 750580720 mm 62 kg

FAQ

How do I clean the air filter system?
To clean the air filter system, gently remove the filter and clean it with mild soap and water. Allow it to dry completely before reinserting it into the printer.

Can I use third-party filaments with the CreatBot F430?
Yes, you can use a variety of third-party filaments with the CreatBot F430 as long as they are compatible with the specified filament diameter (1.75mm) and nozzle diameter (0.4mm).

How often should I recalibrate the automatic leveling platform?
We recommend recalibrating the automatic leveling platform every few weeks or whenever you notice any inconsistencies in print quality due to leveling issues.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>