CreatBot F1000 Affordable and Reliable Large Scale Industrial 3D Printer Instruction Manual
- June 27, 2024
- CreatBot
Table of Contents
CreatBot F1000 Affordable and Reliable Large Scale Industrial 3D Printer Instruction Manual
Smart Dual Extruders 420 ℃
F1000 is embedded with new smart dual-extruder kit hotend temperature up to 420 ℃ , it is able to print not only huge PLA prototype with fastest speed, but also ABS, PC, Nylon, Carbon Fiber, Flexible and more high performance material for direct application. The dual-hotend is easy to maintain and affordable to replace.
High Precision
We exclusively research and develop the extruder feeding system to support
high-speed printing, and accuracy can reach up to 0.1 mm, it allows to extrude
filament steady without block.
Precision up to: 0.1 mm Speed up to: 200 mm/s
Stability
The whole-steel body not only ensure the stability during printing but also greatly extend working life. The optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3d printers with whole-steel body have been working for 9 years and more than 30,000 hours.
Accurate Linear Guide Rail
The accurate linear rail structure can print models in accuracy high reach to 4~5 times higher than the other ordinary optical axis printers in mass market. This structure offers accurate filament feeding, so that can print large model fast and perfectly.
Fully Enclosed Chamber
Hot Chamber + Filament Drying Room
The fully enclosed chamber can block all external interference. Also this
frame can reduce noises, at the same time to provide constant temperature, so
that the model won’t deform.
60 ℃ hot chamber ensures print quality for high performance materials.
The consumable drying chamber provides chamber temperatures of 45 ℃ and 65 ℃
to dry nylon, PC, ABS and other materials with high water absorption.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and save print
data. Lower the platform and withdraw filament when power off suddenly. It
will continue to print from the last stopped point after power’s on.
The printer will avoid invalid printing by stoping print and warning when
filament runs out.
Camera Control Technology
Camera control technology allow customers to control printing process on speed,pause,temp.etc with an APP remotely, which can get best printing quality with shortest time without failure. A very useful feature on large model and long time printing.
Auto Leveling Platform Pro
Use of 25 points through the BL-Touch probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.