Hangzhou Jiefeng Technology Co Ltd EW-N4D2J Dual-Lens Wide View Wifi Camera User Guide

Hangzhou Jiefeng Technology Co Ltd EW-N4D2J Dual-Lens Wide View Wifi

Camera

Product Information

The device complies with part 15 of the FCC rules, which means it meets the standards set by the Federal Communications Commission for electronic devices. The device is designed to operate without causing harmful interference and must accept any interference received, including interference that may cause undesired operation. The equipment also complies with FCC radiation exposure limits for an uncontrolled environment. The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Product Usage Instructions

When using the device, ensure that it is installed and operated with a minimum distance of 20cm between the radiator and your body. This will help to minimize radiation exposure and ensure that the equipment complies with FCC radiation exposure limits. Additionally, do not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance. Doing so could void your authority to operate the equipment.

Packing list

• After unpacking the product, please confirm whether the camera is intact and the accessories are complete according to the figure below

Appearance Introduction

• Please learn the camera interface and buttons before you use it.

Note

• Long-press the reset button to restore the camera to factory default.
• Please connect the camera to internet then install it.

Quick Operation Guide

Step 1: Download & Install APP

1. Scan the below QR code to download the “¡CSee” APP or Search “¡CSee” APP in the APP store and download.
2. (Open iCSee APP, register an account and login (Support third-party account login)

Step 2: Configure the network of the camera

Connect the Power adapter to the power socket and the camera.

1. Connect the camera to WiFi

Note: You don’t need to connect a network cable in wireless mode .

1. After Login, Click the “+” icon to add the device(Figure 1).
2. Select “WiFi camera” (Figure 2). According to the APP guide you can set the camera to the Wi-Fi
3. Note: If you are using a dual-band router, please connect your phone to WiFi on the 2.4G band
4. After configuration is successful, jump to device list page, click the device to open real-time view live or device setting (Figure 3).

Wire network configuration

Note: You need to connect a network cable in this mode

1. Login “¡CSee” APP, Click the “+” icon to add the device(Figure 4).
2. (Click “Other pairing network and adding methods” (Figure 5) and select “Nearby Cameras” (Figure 6)
3. Go into the device searching interface and click the camera you searched (Figure 7)
4. After configuration is successful, jump to device list page, click the device to open real-time view live or device setting

Function Oration Description

1. Human Tracking
   • Enable the “Auto Track” and work with the human detection to automatically capture human trace, realize tracking and capturing, and clearly control every detail. (Figure 8)
2. Picture-in-Picture Description
   • Click the PIP icon as (Figure 9) shown to Far and close up live view(Figure 10).
   • Note: the details are mainly in kind

Cloud Storage

• Enable the cloud storage: Click the “Cloud Storage” and “Cloud Service” icon (Figure 11). in the device list to enable the cloud service according to the APP prompt.

Device Installation

• The device mounting surface needs to be able to bear 3 times the combined weight of bracket and device.

Common Questions

• Q: How to save camera recordings?

1.  **A:** Local TF card storage, maximum to 128G. when TF card is full, auto-delete older videos, loop record video.
2. Recommend cloud storage, Alarm video storage to cloud server, real-time push alarm small video, safe and reliable, you can learn more on APP cloud service page.

• Q: What should I do if forget device password?
  • A: restore factory setting, reconnect and set new password
  • Note: The access password involves privacy and security, please treat it with caution
• Q: What should I do if can’t connect to camera or abnormal offline in use?

1.  **A:** check if camera battery is charged and if the router network is normal
2. Unplug the power cord and then plug it in to restart the camera.
3. restore factory setting(Press and hold the reset button for 6 seconds until you hear “Restoring to factory settings, do not power off” and release it), follow instructions to re-add device

• Q: Does it support 5G band routers?
  • A: If 5G band and 2.4G band of your router are the same SSID, you can connect directly. If 5G band and 2.4G band are not the same SSID(2SSIDs, 5G band is XXXXX-5G,2.4G band is XXXXX-2.4G), Please connect WIFI of phone to 2.4G SSID(XXXXX-2.4G) of router, then configure camera.

Notice

• Please modify the username and password when the product start up in order to protect the privacy.
• Please do not install device in places which is humid, full of dust or accessible to children.
• Please make sure the application or storage environment is in suitable humidity and temperature range. Please do not disassemble it randomly.

Special explanation

• The actual products shall govern. Manual is for reference.
• APP and device firmware will be updated irregularly. Please update online as needed
• If there is any inaccurate item or function explanation mistake or typographical error, please refer to our company explanation.

Product warranty card

Warranty period: One year, this warranty card is applicable to the series of products you purchased from our company.

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>