hama 00201696 MagPower 5 Wireless Charging Station Instruction Manual
- June 14, 2024
- Hama
Table of Contents
hama 00201696 MagPower 5 Wireless Charging Station
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely.Please keep these instructions in a safe place for future
reference. If you sell the device, please pass these operating instructions on
to the new owner.
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Parts
Package contents
- MagPower 5″ power pack
- 2in1 wireless stand
- USB-C charging cable
- PD30W charger
- These operating instructions
Safety instructions
- Protect the product from dirt, moistureand overheating anduse it in dry environments only.
- Aswith allelectrical products, this device should be kept out ofthe reach of children.
- Donot drop the product and do not expose it to any majorshocks.
- Donot operate the product outside the power limits given in thespecifications.
- Donot open the device or continue to operate it if it becomes damaged.
- Dispose of packaging material immediately in accordancewiththe locallyapplicable regulations.
- The battery is permanently installed and cannot be removed; dispose of the product as awhole in accordance with the statutory regulations.
- Donot modify the product in any way.Doing so voids thewarranty.
- Donot in cinerate the battery or the product.
- Donot tamper with or damage/heat/disassemble the batteries/rechargeablebatteries.
- Donot use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Donot use the product in areas in which electronic products arenot permitted.
- Donot attempt to service or repair the product yourself.Leave any and all servicework to qualified experts.
Warning -magnets
- People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker.
- Donot place any bank or similar cards with magnetic strips or magnetically sensitive objectsonthe product. The data on thecards could be damaged or completely deleted.
Warning
Ensure that ther eare no metal parts (e.g. metal plate for magnetic holders)
on theback of your device. Metal heats up significantly in the field of an
induction charger andcan damage your device and/or the power pack.
Operation
- To supply the power,connect the 2in1 wireless stand to the 30W PD charger included.
- To do this, connect then closed USB-C cable to the charger and the USB-Cport(5) on the back of the 2in1 wireless stand.
Charging the MagPower 5
-
Push the MagPower 5 power pack with the induction charging are a pointing forwards into the holder (6) on the 2in1 wireless stand.
-
The USB plug (7) integrated into the holder connects to theUSB-C port integrated into the powerpack and makes a click sound.
-
Charging of the power pack starts automatically as soon as the 2in1 wireless stand is connected to the included 30WPD charger.
-
Once the charging process is complete, the status LED(8) goes out.
Note –capacity
When the power pack is being charged in the holder,the capacity display is not visible. Thecharging function is only indicated via the white status LED (8) on the front of the holder. -
Alternatively,start the power pack charging process by connecting the enclosed USB-C cable to the USB-C port on the power pack (IN 5V/2Aor9V/1.5 A)and to a suitable USB charger.To do this, consult the operating instructions for the USB charger youare using.
-
The charging process begins and ends automatically.
-
Fully charge the power packonce beforeusing it for the first time.
Note –capacity-
During the power pack charging process, the capacity is displayed constantly.
-
Each LED (4) corresponds to 25%ofthe capacity.The permanent illumination ofanLED indicates that the capacity has already been reached. If three LEDs light up and the fourth one flashes,the power pack is at least 75% charged.
-
If all four LEDs (4) light up, the full capacity is available.
-
Press the button on the power pack to switch this on, to determinethe power pack’s current capacity and to start the wireless function.
-
The power pack switchesitself off after around 40 seconds of non-use. Press the Power button twice to switch the power pack off manually.When the power pack switches off,the LED display also goes out.
Warning -rechargeablebattery -
Donot charge the power pack via your PC or notebook. The charging currents can damage the USB port on the PC or notebook.
-
Only use suitable charging devices or USB ports to charge theproduct.
-
Donot use defective chargers or USB ports and do not attempt to repair them.
-
Donot overcharge the product or allow the battery to completely discharge.
-
Avoid storing, charging and using in extreme temperatures and at extremely low at mospheric pressures (such as at high altitudes).
-
When stored over along period of time, batteries should be charged regularly (at least every three months).
-
Charging devices with the Mag Power 5 Power Pack
Wireless charging withthe induction charging zone:
- first switch the power pack on using the Power button onthe under side of the holder.
- The blue function LED (2) brieflyindicates the power pack’s ready stateand then switches off.
- Place your device with its back on the inductive charging zone (B).
- The “MagPower 5” power pack is compatible with Apple Mag Safe technology.The correct alignment and fixation of the device takes place automatically thanks to the magnets integrated into the power pack and the iPhone.
- All other smartphones that support the inductive charging function should also be placed on the induction charging zone (B). In this case, however,the automatic central fixing of the device does not take place.
- The charging process begins as soon as an effective induction field has been established. The status LED(2) lights up blue. The current charge status is displayed onyour device.
- Ifnoinduction connection can be established, change thepositionofyour device if necessary (B).(For all smartphones that do not featureMagSafe technology)
- Ifyour device’s battery is fully charged, the status LED(2) goes out once when you remove thedevice.
- Remove your device from the powerpack’s induction charging zone and switch it off by pressing the Power button twice in quick succession. The LEDs (4) go out.
Note
- The power pack can be charged and the inductive charging function used simultaneously.
- In the wireless stand’s holding device, the power pack automatically switches tochargingmode as soon as the stand is connected to apower supply.The Power button(9) on theunder side of the holderisi nactive in this case. If the wireless stand is not connected via the power supply,the power pack can be switched on via the Power button (9) by pressing it once. Press the Power button (9) twice switch the power pack off again.
Charging via the power pack’s USB-C output:
-
connect the enclosed USB-Ccharging cabletothe USB-C port onthe power pack
(OUT 5V /2A, 9V/1.5 A, 12 V/1.1 A)and with the USB-C port onyour device (mobile phone, smartphone, etc.). -
Incertain circumstances, the enclosed charging /connecting cable maynot matchthe USB port on your device.In this case, use the USB cable that came with your device.
-
The charging process begins automatically.During the charging process,the LEDs(4) the power pack’s remaining available capacity.
-
The current battery charge status of your device is indicated onthis.
-
Terminate the charging process and switch the power pack off by pressingthe power button twice in quicksuccession. The status LEDs go out.
-
Inthe event that no device is connected, the power pack switches itself off automatically.
Warning -connecting devices
- Before connecting a device, check whether it can be adequately supplied withthe power pack’s current delivery.
- Ensure that the total current consumption of the connected device does not exceed 2000mA.
- Note the instructions in your device’s operating manual.
- You must obey the instructions and safety notes contained therein regardingthe supply ofpower to your devices.
Note –optimised charging
Optimised charging means that the power pack recognises theconnected device,
supplies it with the ideal current strength and thereforereduces the
chargingtime toaminimum.Notethatthe power pack’s maximum current delivery is
2000 mA.
Charging devices with the 2in1 wireless stand
Charging devices with the inductive charging function
- The 2in1 wireless stand has an induction charging zone (5W) for Apple Airpods or other headphones that canbecharged using inductive charging technology.
- To charge your device, place it on the inductive charging zone(10). The charging process begins automatically. The white status LED(11) indicates the charging function.
Charging devices with the USB-C port on the wireless stand
- Devices can also be charged on the wireless stand’s USB-C port (12)(OUT 5V/1A).
- The port is also suitable for using asmart watch chargingpad. Please ensure that the maximum output of 5W is not exceeded.
Care and maintenance
Only clean this product using alint-free, slightly damp cloth and donot useany harsh cleaners.
Warranty disclaimer
Hama GmbH &CoK Gassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Technical data
Wireless stand MagPower5 *The usable capacity is the capacity that
can be drawn from the output sockets, measured at 5V Output voltage and a draw
current of 2A.
PD30W charger
Declaration of Conformity
Hama GmbH &CoK Ghereby declares that the radio equipmenttype [00201696] is in
compliance with Directive 2014/53/EU.The full text of the EU declaration of
conformity is available at the following Internet address:
www.hama.com -> 00201696->Downloads.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>