FASTMIX Fastline Steel Services User Guide
- June 1, 2024
- FASTMIX
Table of Contents
FASTMIX Fastline Steel Services
Specifications
- Compressive Strength: 25-30N/mm2 at 28 days
- Packaging Options: Bulk Tanker, 20Kg plastic bags, 1 tonne bags
- Storage: Keep clear of the ground, sheeted, under cover, unopened
- Shelf Life: Use within a 12 month period of manufacture
Product Usage Instructions
Mixing & Usage Guide
- Dig a hole of sufficient depth for the post. The width should be at least x3 the diameter of the post.
- Place the post in the hole, fix in position, and check alignment with a spirit level. Stake with supporting battens.
- Empty half the bag contents around the base of the post. Pour 1 litre of water onto the FASTMIX.
- Empty the rest of the bag contents into the hole and pour another 1 litre of water. Stop pouring when water ceases to soak away.
- After setting (10-15 mins), remove batten supports. Wait an hour before fixing anything to the post.
Applications
- For a 2.4m post, have 0.6m below and 1.8m above ground.
- One 20kg bag secures a standard fence post. Setting time is 10-15 mins, longer in cold weather.
FAQ
- Q: What should I do if the concrete doesn’t set properly?
- A: Ensure proper mixing and follow the usage instructions carefully. Contact customer support for further assistance.
- Q: Can I use this product for indoor applications?
- A: This product is suitable for both indoor and outdoor applications, but ensure proper ventilation during indoor usage.
- Q: How should I dispose of unused product?
- A: Dispose of unused product according to local regulations for construction waste disposal.
The Product
Fastline Steel Services UK Ltd FASTMIX is the ideal time and effort saving solution for domestic or commercial applications such as fixing posts, road signs or bollards, as no mixing with water is required before placing. Typical compressive strength is between 25-30N/mm2 at 28 days but should you require a more structural product for specialist applications, enquire about our FASTMIX-PLUS (40N/mm2).
Quality
This product is tested in accordance with specific procedures to ensure compliance to specification prior to despatch and are subject to the controls of a BS EN ISO 9001 : 2008 approved quality system.
Packaging & Storage
Fastline Steel Services UK Ltd FASTMIX can be supplied in Bulk Tanker, 20Kg plastic bags or 1 tonne bags, palletised and shrink wrapped. The packaging is 100% water proof but for best results the material should be stored clear of the ground, sheeted and preferably under cover and unopened. The pallets should not be stacked more than two high with the material being used on a first in, first out basis. For best results, store correctly and use within a 12 month period of manufacture.
Mixing & Usage Guide
Do not use when air temperature is below +5ºC or when ground is frozen. Do not mix this product with any other cement, cement admixture or similar products. Do not move the post for at least 10 minutes until after the product has set. For your comfort and convenience wear gloves to avoid any material contacting the skin.
- Dig a hole of sufficient depth for the post -As a useful guide a 3m post should have 1m below and 2m above ground level. Avoid digging the hole in an ever widening neck. The width of the hole should be at least x3 the diameter of the post.
- Place the post in the hole and fix in position. Check for alignment with a spirit level. Stake the post with supporting battens, leaving your hands free for the rest of the job.
- Empty half the contents of the bag into the hole around the base of the post. Pour 1 litre of clean water onto the Fastline Steel Services UK Ltd FASTMIX. The best results are obtained when the water is poured on the area directly surrounding the post. Stop pouring when the water ceases to soak away.
- Now empty the remaining contents of the bag into the hole and again, pour a further 1 litre clean water onto the Fastline Steel Services UK Ltd FASTMIX until the water ceases to soak away.
- After setting (approximately 10-15 mins dependent on ambient temperature), the batten supports can be removed. Ideally, allow a further hour before attempting to fix anything to the post as any movement may weaken the concrete.
Note: Ensure all tools and equipment are cleaned thoroughly with water prior to the material setting.
Fastline Steel Services UK Ltd cannot accept responsibility for unsatisfactory concrete where workmanship has not been carried out in accordance with good practice.
Health & Safety
Cement powder when mixed with water releases Alkali which may cause skin and eye irritation. We therefore advise the use of barrier creams, gloves and protective eyewear as a precaution when using these products. A further detailed Health and Safety Data Sheet for these products is available on request.
Applications
No requirement for mixing – just add water after placing As a guide a 2.4m post should have 0.6m below and 1.8m above ground level. One 20kg bag of Fastline Steel Services UK Ltd FASTMIX will secure a standard size fence post. Setting is normally in 10-15 minutes but may be longer in cold weather.
Danger
- Causes serious eye damage
- Causes skin irritation
- May cause allergic skin reaction
- May cause respiratory irritation
Contact
FASTLINE STEEL SERVICES UK LTD
- Unit G1, Strawberry Lane, Willenhall, WV13 3RS
- www.fastlinesteel.co.uk
- +44(0)1922 623 222
- info@fastlinesteel.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>