Hangzhou Kaite Electrical Appliance 30153 Smart Socket User Manual

Hangzhou Kaite Electrical Appliance 30153 Smart Socket User Manual

Simplified the steps to install App on your smart device and to pair with Amazon Alexa and Google Assistant, and use Smart life App on Apple Store Google Play StoreWorks with Amazon Alexa. Compatible with any smart phone including any Android devices and Apple

1. Download Smart life app from App Store or Google play
2. Please use your phone to scan QR code, or you can search “Smart life” in app markets, market to download and install the App

3. Use the phone number + verification code or email to register in app . Enter your phone number, and select the country you live in. If you select the phone number, you will receive a text with a registration code. If you choose to register with email you will then create a password.

Quick Mode Configuration (Common)
1. Install the smart plug/ power switch
Plug the device into the power socket. If the device’s light is in the two times per second quick flicker mode, it is the distribution network state. You can open the APP, start to network the device.

If the device indicator light is not flashing, this device is in normal mode. You need to press the power switch button for 5 seconds, let the LED light of the device flicker rapidly. then open the APP and connecting the device

2. Open the “+1′ icon in smart life, select the device type, and the APP will pop up the prompt page, asking whether the LED status of the device is consistent with the LED flashing frequency in the prompt page.lf it is consistent, please click confirm. The app will pop up a network alert page reminding you that your router and mobile network must be 2.4Ghz. Then check whether the network name below is correct and fill in the password. Please click confirm.

Smart plug optionElectrical Outlet
Smart switch option Wall switch

3. The connection is completed, the equipment will be displayed in the App list, click can change product name, Click “Completed” to enter the device control page.

4. Click on the top right corner button can modify the device name and into the use of direct contact with us

If the first link is not successful due to password error or other
reasons, please hold down the switch case for 5 seconds and
set the indicator light to a continuous flashing mode of 2 times
per second to repeat the link.

AP Mode Configuration

1. When you enter the fast mode, Press the power switch button for 5 seconds, the device indicator light will enter the slow flash state, which is 1 flash for 1.5 seconds.
2. Then follow the instructions to connect smart life-XXX with WiFi. After connecting, you need to return to the Smart life App
3. Once it is connected, the App will prompt the connection, and click “Done”.
4. Now you can control smart devices or smart plug through the smart life app lication
5. Once the devices has been configured successfully, the device will be added to the “device list.”

Please note: You can add the Smart devices to Echo/Google Home following the instructions below.

How to connect Smart Device with the Amazon Alexa

1. Start the smart life app, log in your account, and make sure smart devices or plugs are in the device list.
2. Change the name of the device so that it can be easily identified by Alexa, such as: light bulb or plug in the living room, light bulb or plug in the bedroom, etc
3. Minimize Smart life App, then open the Alexa App and log in your Alexa account and make sure you have at least one Alexa voice-controlled device installed like Echo, Echo dot, etc.
4. In the top left corner of Home page, click button to show App menu. Then show Skills in the menu.

5. Then search “Smart life “. Select ” Smart life ” and tap “Enable” to enable the skill.
6. You will be entered to the account link page. Type in your Smart life account and password, do not forget to select the country/region where your account belongs to. Then tap “Link Now” to link your Smart life account. When “Alexa has been successfully linked with Smart life” shows up, tap X on the top right corner, back to the Alexa app.

7. Discover devices
Echo needs to discover your smart devices before it controls them. You can say “Alexa, discover devices” to Echo. Echo will discover devices which have already been added in the Smart life app.
You can also tap “Discover devices” to discover the smart devices. Discovered devices will be shown in the list.

Note: every time you change the device’s name on Smart life app, Echo must re-discover before you control them.

8. Control devices by voice commands
Now you can control your smart devices through Echo. You can use the following commands to control your devices (e.g., bedroom plug):
Ø Alexa, turn on/off bedroom plug.

How to connect Smart Device with Google Home

1. Launch the Google Home App and make sure Google Home speaker is installed. If not, please follow Google Home speaker installation instruction to complete the installation.
2. Once Google Home is installed, in the top left corner of App Home page, click button to show App menu. Then click “Home Control” in the menu.

ATTENTION: If you log in Google Home app with several Google accounts, only the first Google account you logged in can be used for “Home Control”.

3. On “Add devices” page, scroll down to find “Smart life ” and then click it. Log in Smart life App with your Smart life App account and password and choose Smart life App in the dropdown menu to complete the account linking.
4. After successful account linking, in Google Home App you can see all the smart devices from your Smart life App account. You can assign rooms for each device.

5. Now you can use Google Home to control your smart devices, you can say: ok, Google, turn on/off wall plug

Note: every time you change the device’s name on Smart life app, Google Home must re discover before you control them. Our technical service email is as follows:

[email protected]

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

MPE Requirements
Note: applied for device with distance 20cm from
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>