RICE LAKE WEIGHING SYSTEMS RL72020P Load Cell and Weigh Module Selection User Guide
- June 24, 2024
- RICE LAKE WEIGHING SYSTEMS
Table of Contents
- RL72020P Load Cell and Weigh Module Selection
- Specifications:
- Product Usage Instructions:
- Load Cell and Weigh Module Selection Guide:
- Step 1: Determine Your Requirements
- Step 2: Consult the Load Cell Guide
- Step 3: Contact Customer Support
- Q: How can I request a physical copy of the Load Cell
- Q: What are the technical support contact details?
RL72020P Load Cell and Weigh Module Selection
“`html
Specifications:
- Manufacturer: Rice Lake Weighing Systems
- Product Type: Load Cell and Weigh Module
- Global Leader in process solutions
- Largest selection of load cells and mounts
- Website: www.ricelake.com
Product Usage Instructions:
Load Cell and Weigh Module Selection Guide:
Rice Lake Weighing Systems offers a wide range of load cells and
weigh modules to cater to various industry needs. To select the
best load cell and weigh module for your application, follow these
steps:
Step 1: Determine Your Requirements
Identify the specific needs of your weighing application, such
as the environment, capacity, accuracy, and mounting options.
Step 2: Consult the Load Cell Guide
Visit Load
Cell Guide on ricelake.com for
detailed information,
dimensional drawings, technical specifications, and load
ratings.
Step 3: Contact Customer Support
If you require further assistance or custom solutions, contact
Rice Lake’s customer service at the provided phone numbers or
email.
Frequently Asked Questions (FAQ):
Q: How can I request a physical copy of the Load Cell
Guide?
A: You can request a physical copy of the Load Cell Guide by
contacting the literature coordinator at
800-472-6703 or by
emailing orderdesk@ricelake.com.
Q: What are the technical support contact details?
A: For technical support, you can reach out to
800-472-6703 for
general technical support, or for Canada & Mexico, dial
800-321-6703.
“`
Load Cell and Weigh Module
Selection Guide
Rice Lake Weighing Systems is a global leader in process solutions founded on
the principle of excellent customer service. Our dedication to customer
relationships continues to guide our future in the global weighing,
measurement and process control industry.
Our extensive range of products allows our customers to create personalized
systems no matter what industry they are in. Rice Lake has the world’s largest
selection of load cells and mounts, including Rice Lake, VPG Celtron, VPG BLH,
HBK, Flintec, Interface, VPG Revere, VPG Sensortronics and VPG Tedea-
Huntleigh.
This overview of Rice Lake’s load cell and weigh module offering demonstrates
the range of solutions we can provide. A complete selection of our load cells
and weigh modules can be found on www.ricelake.com and in our Load Cell Guide.
The Load Cell Guide includes complete dimensional drawings, technical
specifications, wiring codes and load ratings.
Download a PDF of the Load Cell Guide from our website or request a physical
copy by contacting our literature coordinator at
800-472-6703.
Rice Lake Contact Information:
To place an order:
Toll Free USA: 800-472-6703
24-hour Fax: 715-234-6967
Telephone: 715-234-9171
Email: orderdesk@ricelake.com
Toll Free Canada/Mexico: 800-321-6703
Internet: www.ricelake.com
Technical Support:
Technical Support: 800-472-6703
Canada & Mexico Technical Support:
800-321-6703
Service, Repairs, Warranty:
800-472-6703
service.rlws@ricelake.com
Customer Assistance and Service Department hours Weekdays: 6:30 AM to 6:30 PM (Central Time) Saturday: 8:00 AM to 12:00 PM (Central Time) Customer service available in English, Spanish and French
TABLE OF CONTENTS
Weigh Modules Selections
SELECTION OVERVIEW 2
SUSPENDED WEIGHING 6
VESSEL WEIGHING
8
TRUCK SCALE
WEIGHING
14
Load Cell Selections
OVERVIEW
16
SINGLE POINTS
18
DOUBLE-ENDED
BEAMS
20
SINGLE-ENDED
BEAMS
22
S-BEAMS AND
CANISTER TYPE
24
Selecting Load Cells and Weigh Modules
Be Confident You’re Installing The Best
Rice Lake Weighing Systems’ experienced engineering and design staff deliver
high-quality weigh modules and load cells. We consider factors such as working
environment, loading conditions and other design specifications to help you
find the best solution. We offer over 20 different mount styles, including
waterproof weigh modules. Coupled with our outstanding selection of load cells
manufactured to the highest quality standards, our mounts are complete with
everything you need, backed by unbeatable support.
Custom Load Cell and Mount Specialists
Rice Lake Weighing Systems offers the most comprehensive selection of load
cells, mounts and sensors available. We also know that you may have unique
requirements that make custom solutions necessary. If you don’t see what you
need in our catalog, call us to take advantage of the many special services
Rice Lake Weighing Systems has to offer:
· Customized load cells and mounts · Special coatings–SURVIVOR® coating for
use
in hazardous chemical environments · Customized cable lengths · Special
cable–PTFE load cell cable
for harsh environments
2
3
Choosing the Correct Weigh Module
The wide variety of weigh modules available can make it challenging to
determine the differences and what system is best for your application. Most
weigh module uses can be classified into one of three categories:
· Suspended Weighing · Vessel Weighing · Truck Scale Weighing
Complete Mounting Kits
Complete mounting kits are available with our weigh modules, simplifying the
selection and installation processes. Each kit comes with a detailed
installation manual and an analog junction box with cable assembly,
eliminating the need to order separate parts. All standard weigh module kits
include the required load cell(s), junction box, mounting hardware and cable,
but can be customized to meet your exact needs.
4
5
Suspended Weighing
Suspended weigh modules support load cells that are hung vertically and
measure through tension, such as in suspended hoppers. Suspended weigh modules
are available in stainless or mild steel.
ITCM Series (Isolated Tension Cell Modules)
Featuring a clevis and rod-end ball-joint assembly, the ITCM mount is half the
overall length of traditional s-beam tension mounts. This unique design
consistently corrects loading alignment, even in difficult applications. The
load cell is completely isolated from stray currents using PTFE-lined rod ends
and a grounding strap which provides an alternative path to ground. Use in
single- or multiple-module configurations. Most capacities are NTEP approved.
Alloy Steel
100 to 20,000 pounds (45.4 to 9,071.9 kilograms)
Stainless Steel
100 to 5,000 pounds (45.4 to 2,268 kilograms)
Stainless Steel HE
500 to 5,000 pounds (226.8 to 2,268 kilograms)
6
7
Vessel Weighing
Available in either stainless or painted mild steel, Rice Lake carries a
variety of models and configurations for weighing tanks, vessels and other
fixed containers.
EZ Mount 1 Series
Utilizing a unique self-checking sliding-pin design, the EZ Mount 1 allows for
thermal expansion and contraction and controlled scale-deck movement with
minimal friction. FM approved load cells make this module ideal for
intrinsically safe, explosion-proof, and medium- to heavy-capacity tank and
hopper functions. EZ Mount 1 Series is available in stainless steel and
hermetically sealed variations as well as an NTEP Certified mild and stainless
steel design.
Mild/Stainless Steel
5,000 to 150,00 pounds (2268 to 68,040kilograms)
RL1600 Series
The RL1600 is a low-profile, bolt-in-place model for mounting directly to a
tank without additional mounting plates or load buttons. Self-checking
movement tolerates thermal expansion and contraction and provides lift-off
protection. RL1600 Series is well-suited for medium- to heavy-capacity tanks,
bins, hoppers and general dry ingredient and bulk material management.
Cast Iron
1,000 to 25,000pounds (453.6 to 11,340kilograms)
Mild/Stainless Steel
1,000 to 75,000pounds (453.6 to 34,019.5kilograms)
RL1600
8
EZ Mount 1
RL9000 TWM
RL9000 TWM Series
The low-profile, IP67-rated, RL9000 TWM maximizes space and offers an all-in-
one package with optimal top plates to minimize installation time. This module
delivers accurate readings even while off level by as much as 3°. RL9000 TWM
has self-centering in all directions with 100% uplift protection that provides
extreme durability.
Stainless Steel
1,000 to 450,000pounds (453.6 to 204,116.6kilograms)
RL9000 TWM-HT
Rice Lake’s RL9000 TWM-HT adds an enhanced FEP cable with special strain
gauges and other components that withstand temperatures as high as 400°F.
9
Vessel Weighing
SURVIVOR® RL1700 HE
This all stainless steel, weldless self-checking design guarantees reliable,
waterproof performance. With a hermetically sealed IP66/68-rated stainless
steel load cell, the SURVIVOR RL1700 HE is perfect for light- to medium-
capacity needs of today’s industrial food processors. Adjustable
jacking/shipping bolts easily secure the top mounting plate away from the load
cell to make installation and service fast and simple. The SURVIVOR RL1700 HE
is NTEP and OIML approved.
Stainless Steel
11 to 11,023.1pounds (5 to 5,000kilograms)
RL1800 Series
Combining self-checking and multi-directional movement capabilities, the
RL1800 tolerates platform and tank movement in all directions. The center-
pivoted, tension-loading design incorporates spherical washers for self-
centering. A load is suspended on a high-strength bolt instead of the
traditional wire rope, providing added durability. The RL1800 is NTEP and OIML
(on request) approved.
Plated Mild/Stainless Steel
250 to 10,000pounds (113.4 to 4,535.9kilograms)
RL1900 Series
The stainless steel RL1900 Series Weigh Module Kit utilizes several Rice Lake
Weighing Systems components to provide an unmatched level of performance. The
RL1900 Kit is ideally suited for tank, hopper and bin weighing operations with
medium-range capacities. Each module combines multi-directional movement and
self-checking capabilities. The welded-seal stainless steel load cell
withstands corrosive washdown environments. The RL1900 Series is NTEP
approved.
Stainless Steel
1,000 to 10,000pounds (453.6 to 4,535.9kilograms)
10
RL1900
RL1800
SURVIVOR RL1700 HE
11
Vessel Weighing
MVS Truck/Track/HorizontalTank Module
Built to withstand the most punishing environments, MVS mounts use center-
loaded double-ended shear beam load cells to eliminate the need for costly
check rods. The result is a pendulum effect that removes binding, protects the
load cell from damaging side loads and automatically returns the scale to dead
center. The mild steel MVS is easy to install and promises high performance
and long life.
NTEP Certified
20,000 to 125,000pounds (4.536 to 56,700kilograms)
RL50210 TA Mini Tank and Conveyor Modules
The RL50210 TA is a cost-effective solution for indoor applications with low
checking requirements and moderate shock. This popular design utilizes
neoprene isolation/compression mounts, allowing for minor misalignments,
expansion, contraction and shock absorption. RL50210 TA is available in either
stainless steel or zinc-plated mild steel and is NTEP Certified in most
capacities.
NTEP Certifed
1,000 to 2,500pounds (22.7 to 1,134.0kilograms)
Overload Stop Modules
500 pounds (226.8 kilograms) and up
Paramounts
12
MVS
RL50210 TA
Paramounts® Series
Choose the Paramounts design for superior accuracy in applications with
expansion, contraction and vibration. By adding up to six free-sliding
modules, these systems offer the free motion to eliminate side loads and the
strength to keep the vessel intact. Jacking/shipping bolts prevent accidental
lift-off and allow for quick installation or service to load cells. Most
capacities are NTEP Certified.
Mild Steel EP
1,125 to 22,500 pounds (5,108 to 10,215 kilograms)
Stainless Steel HE/Mild Steel HS
1,125 to 22,500 pounds (236.1 to 10,215 kilograms)
13
Truck Scale Weighing
These modules are best suited for weighbridge designs but meet the needs of a
broad range of industrial scale applications.
MVS Truck/Track/Horizontal Tank Module
Built to withstand the most punishing environments, MVS mounts use center-
loaded double-ended shear beam load cells to eliminate the need for costly
check rods. The result is a pendulum effect that removes binding, protects the
load cell from damaging side loads and automatically returns the scale to dead
center. The mild steel MVS is easy to install and promises high performance
and long life.
Series
10,000 to 125,000 pounds (4,536 to 56,700 kilograms)
NTEP Certified
20,000 to 125,000pounds (9,071.9 to 56,700kilograms)
TranslinkTM Truck Scale Assembly
The Translink parallel-link truck scale assembly permits free movement in all
directions on a horizontal plane while the pendulum action of the links
quickly return the scale to center. No need for costly check rods; simply
install platform bumpers and forget about over-travel. This painted alloy-
steel assembly is ideal for heavycapacity weighbridges and horizontal tanks.
Series
25,000 to 100,000pounds (11,339.8 to 45,359.4kilograms)
14
Translink MVS
15
Load Cells
With the largest selection of quality load cells available in stock, nobody
offers faster, more reliable service. Whether you need a replacement load cell
or a load cell for a unique application, we’ve got a solution to fit any need.
Our knowledgeable customer service representatives can answer your questions
and help you select the best load cell for any application. From tank and
hopper weighing to bulk material management or mechanical scale conversions,
we provide unmatched service for our customers.
Load Cell Types
Single Point
Single point load cells are similar to single-ended beams but designed for
lighter capacity applications such as bench scales. Single point load cells
are most commonly constructed of aluminum with capacities ranging from 1 to
1,000 kilograms.
Double-ended Beam
A double-ended beam load cell is secured at both ends with the load applied to
the center. Double-ended beam load cells come in a variety of constructions
with capacities ranging from 1,000 to 250,000 pounds.
16
Single-ended Beam
A single-ended beam load cell is secured at one end with the load applied to
the opposite end. Construction can either be mild or stainless steel with
capacities ranging from 1,000 to 20,000 pounds.
S-beam
S-beam load cells are most commonly used to suspend a weighing vessel with
tension applied through stretching. Capacities typically range from 25 to
40,000pounds.
Canister Type
Canister type load cells are cylindrical load cells with force applied
vertically in tension or compression. These load cells are ideal for heavy-
capacity and environmentally demanding applications with capacities ranging
from 20,000 to 500,000pounds.
17
Single Points
RL42018A
The RL42018A is an aluminum, IP66 single-point load cell. It is available in
capacities ranging from 3 to 100 kilograms, and is NTEP Certified and FM
approved. The RL42018A has 10 feet of load cell cable included.
Aluminum
3 to 100kilograms (6.7 to 220.5pounds)
RLPWM15HE
This IP69K-rated, hermetically sealed, stainless steel model is NTEP Certified
and perfect for the stringent demands of industrial food processors and other
washdown applications. The RLPWM15HE includes 10feet (3.1meters) of load cell
cable.
Stainless Steel
10 to 100kilograms (22 to 220.5pounds)
RL26018A
The RL26018A aluminum, single-point load cell is ideal for bench scales and
comes in capacities ranging from 50 to 635 kilograms. It is NTEP and FM
approved and is environmentally sealed to IP67. The RL26018A is complete with
10 feet of load cell cable.
Aluminum
50 to 635kilograms (110 to 1,400pounds)
RL42018A
18
RL26018A
RLPWM15HE
19
Double-ended Beams
RL72020 Series
The RL72020 is an alloy steel, double-ended beam load cell ideal for truck, tank and hopper applications. The RL72020 is available in capacities of 5,000 to 250,000 pounds. It is complete with 30 feet of load cell cable.
Alloy Steel
5,000 to 250,000pounds (2268.0 to 113,400kilograms)
RL72020
RL75016 Series
The RL75016 is a double-ended beam load cell for tank and hopper applications
that features stainless and mild steel construction as well as hermetic
sealing for hostile environments. This load cell comes complete with 25feet
(7.6meters) of load cell cable. The RL75016 includes the alloy-steel RL75016,
stainless steel RL75016 SS, and the stainless steel, welded-seal RL75016 WHE
designed for hostile environments.
Series
1,000 to 25,000pounds (453.6 to 11,339.8kilograms)
RL75058-LP Series
The RL75058-LP high-alloy steel, nickel plated load cell has built-in
lightning protection and is available in capacities from 10,000 to 125,000
pounds. Sealed to IP67, it has a 3 mV output and is cFMus approved and NTEP
Certified.
Series
10,000 to 125,000 pounds (4,535.9 to 56,699.1 kilograms)
20
RL75016
RL75058-LP
21
Single-ended Beams
RL32018 Series
The RL32018 is designed for low-profile scales in a variety of process
applications. Each load cell is FM approved and NTEP Certified. It comes with
20 feet of load cell cable.
Alloy Steel
500 to 20,000pounds (226.8 to 9,071.9kilograms)
Alloy Steel NTEP Certified
1,000 to 10,000 pounds (453.6 to 4,535.9kilograms)
RL32018S-HE Series
The RL32018S-HE is a hermetically sealed, stainless steel load cell that
provides exceptional performance in food and chemical processing. Sealed to
IP69K standards, this load cell is 3 mV/V and NTEP Certified. It comes with 20
feet of PTFE jacketed cable.
Stainless Steel
1,000 to 10,000pounds (453.6 to 4,535.9kilograms)
RL9018SS
The RL9018SS is hermetically sealed with an IP68/IP69K rating to function
flawlessly in harsh environments. The RL9018SS is traditionally used in low-
profile platforms, weighing and packaging machines, electromechanical
conversions and general-purpose weighing applications. It is NTEP Certified
and each load cell comes with 3 meters of cable.
Stainless Steel
5 to 500 kilograms (11.0 to 1,102.3pounds)
22
RL32018 RL9018SS
RL32018S HE
23
S-beams
RL20000 Series
The IP67-rated RL20000 Series is equipped to handle damp operating
environments with ease and is NTEP Certified in most capacities. Each s-beam
load cell includes 20feet (6.1meters) of load cell cable. Environmentally
sealed models include the alloy-steel RL20000, stainless steel RL20000 SS,
stainless steel RL20000 ST and the alloy-steel RL20001. Also available is the
stainless steel, welded-seal RL20001 HE.
RL20001HE Stainless Steel
Capacities ranging from 500 lb to 10,000 lb.
RL20000ST Stainless Steel
Capacities ranging from 5 lb to 10,000 lb.
RL20001 Alloy Steel
Capacities range from 250 lb to 20,000 lb.
RL20001HE
RL20001
RL20000ST
RLCSP1 Compression Canister
This high-capacity load cell is built with reliability, durability and
precision in mind. RLCSP1 offers welded-seal, stainless steel construction for
demanding vehicle-scale and process applications. This load cell is NTEP
Certified and comes standard with 30feet (9.2meters) of load cell cable.
Stainless Steel
25,000 to 200,000pounds (11,339.8 to 90,718.5kilograms)
24
RLCSP1
25
230 West Coleman Street Rice Lake, Wisconsin 54868 – USA Tel: (715) 234 9171 |
Fax: (715) 234 6967
www.ricelake.com
Specifications subject to change without notice. © 2016 Rice Lake Weighing
Systems PN 43740 en-US 12/23 REV-B