DENSO TEN TN0036A Car Audio User Manual

DENSO TEN TN0036A Car Audio User Manual

|
---|---
LOAD IMPEDANCE| 4Ω
BACK UP CURRENT| 2.1mA or less
RATED CURRENT| 4.0Ａ or less(Vcc=13.2V, 0.5W output)
AM TUNING RANGE| 531 – 1602 kHz (9kHz step)
FM TUNING RANGE| 87.5 – 108 MHz (50kHz step)

2-Button Function Spec

■AUDIO controls

Button No.| Button Name| Operation
①| VOL DOWN| Short Push: Decrease Volume Down 1 step Long Push: Decrease Volume Down continuously
②| VOL UP| Short Push: Increase Volume Up 1 step Long Push: Increase Volume Up continuously
③| HOME/TALK| Short Push: Transition to home screen Long Push: AA/CP voice recognition
④| BACK| Transition to previous screen
⑤| POWER| Audio ON/OFF

3-Radio operation procedure

Operation procedure]

1. ACC-ON)
   ACC-ON、TOYOTA
   After the ACC-ON, confirm that Toyota screen is displayed.
   

2. CAUTION
   The screen is changed to “CAUTION” screen after a few seconds.
   ACC-ON
   Note: It takes a little longer for the first time of ACC-ON.
   

3. Continue MENU
   Press the “Continue” button on the face panel after a few seconds to move MENU screen.
   

4. POWER
   FM1
   Press the POWER button.
   When the Radio Mode Window on the screen is pressed,”FM1″ screen is displayed.
   

5. SEEK
   Confirm that the screen is changed as below,
   Please push down the ”<”button or ”>”button.
   This will start to SEEK.
   

Operating manual (Bluetooth/Handsfree)

Operation procedure」

1. ACC-ON) ACC-ON TOYOTA
   After the ACC-ON, confirm that Toyota screen is displayed.
   

2. CAUTION
   The screen is changed to “CAUTION” screen after a few seconds. ACC-ON
   Note: It takes a little longer for the first time of ACC-ON.
   

3. Continue MENU  Press the “Continue” button on the face panel after a few seconds to move MENU screen
   

4. ”Setting SETTINGS
   Please press the “Setting” button on the face panel to move to Settings screen

5. Settings “Bluetooth
   Confirm if ”Settings” screen is displayed, select the ”Bluetooth” button on the display
   

6. ”Add Device
   ACC-ON、TOYOTA。 Please press the ”Add Device” button of the screen
   

7. Search Device
   Please press the ”Search Device” button of the screen
   

8. Bluetooth iPhone 、iPod
   Confirm if screen is changed as below,
   Please set iPhone or iPod in pairing mode
   Displays when you have more than one pairing equipment
   

9. iPhone iPod
   Select the iPhone or iPod to connect.
   Operate the phone after the message on the screen
   

10. “Connection Completed
    ”Connection Completed” is displayed if completed.
    

Operating manual (Wi-Fi/Carplay)

Operation procedure]

1. (ACC-ON) ”Search
   ACC-ON、TOYOTA
   After the ACC-ON, confirm that Toyota screen is displayed
   

2. “CAUTION
   The screen is changed to “CAUTION” screen after a few seconds.
   ACC-ON
   Note: It takes a little longer for the first time of ACC-ON.
   

3. ”Continue” MENU
   Press the “Continue” button on the face panel after a few seconds to move MENU screen
   

4. Setting 、SETTINGS
   Please press the “Setting” button on the face panel to move to Settings screen

5. Settings
   “Seach Apple CarPlay Device
   Confirm that the screen will change to the “Settings” screen, slide it down and select the “Seach Apple CarPlay Device” button on the screen

6. Search。
   ACC-ON、TOYOTA iPhone Bluetooth ON
   After the ACC-ON, confirm that Toyota screen is displayed. Please press the ”Search” button of the screen
   At this time, turn on Bluetooth on the iPhone to be connected.
   

7. iPhone
   Please Select the connected iPhone.

8. OK iPhon
   If the display looks like the one below, press the [OK] button on the product side and press [Pairing] on the iPhone side.
   

9. Car Play
   Connection is completed when the screen automatically transitions to 　　the CarPlay screen.
   

FCC Operating manual Requirement

Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>