DENSO TEN TN0036A Car Audio User Manual
- June 22, 2024
- DENSO TEN
Table of Contents
DENSO TEN TN0036A Car Audio
Specifications
- Rated Voltage: 12V (10.5-16.0V)
- Load Impedance: Ground 4
- Back Up Current: 2.1mA or less
- Rated Current: 4.0 or less (Vcc=13.2V, 0.5W output)
- AM Tuning Range: 531 – 1602 kHz (9kHz step)
- FM Tuning Range: 87.5 – 108 MHz (50kHz step)
- DAB Tuning Range: 174.928 – 229.072 MHz
Product Usage Instructions
Rating
Ensure the voltage input is within the specified range. Check impedance and current ratings before operation.
Button Function Spec
The buttons control audio functions. Use short and long presses for volume adjustment and system navigation.
Radio Operation Procedure
Follow the specified procedure to operate the radio, including transitioning screens and seeking channels in FM and AM/DAB modes.
Operating Manual (Bluetooth/Handsfree)
For Bluetooth and hands-free operation, follow the steps for device pairing, searching, and connection completion as outlined in the manual.
Operating Manual (Wi-Fi/Carplay)
To use Wi-Fi and Carplay features, ensure Bluetooth is on, search for devices, and follow the screen prompts for connection setup.
FAQ
Q: How do I reset the device?
A: To reset the device, locate the reset button on the unit and press it for a few seconds until the device restarts.
| Model name | Car Audio |
|---|---|
| Model No | TN0036A |
1-Rating
| RATED VOLTAGE | 12V (10.5～16.0V) – ground |
|---|---|
| LOAD IMPEDANCE | 4Ω |
| BACK UP CURRENT | 2.1mA or less |
| RATED CURRENT | 4.0Ａ or less |
(Vcc=13.2V, 0.5W output)
AM TUNING RANGE| 531 – 1602 kHz (9kHz step)
FM TUNING RANGE| 87.5 – 108 MHz (50kHz step)
DAB TUNING RANGE| 174.928 – 229.072 MHz
Button Function Spec
AUDIO controls
■AUDIO controls
Button No.| Button Name| Operation
①| VOL DOWN| Short Push: Decrease Volume Down 1 step Long Push: Decrease
Volume Down continuously
②| VOL UP| Short Push: Increase Volume Up 1 step Long Push: Increase
Volume Up continuously
③| HOME/TALK| Short Push: Transition to home screen Long Push: AA/CP
voice recognition
④| BACK| Transition to previous screen
⑤| POWER| Audio ON/OFF
Radio operation procedure
Operation procedure
-
(ACC-ON)
After the ACC-ON, confirm that Toyota screen is displayed. -
The screen is changed to “CAUTION” screen after a few seconds.
Note: It takes a little longer for the first time of ACC-ON.
- Press the “Continue” button on the face panel after a few seconds to move MENU screen.
- Press the POWER button.
When the Radio Mode Window on the screen is pressed,”FM1″ screen is displayed.
- Confirm that the screen is changed as below, Please push down the ”<”button or ”>”button.
This will start to SEEK.
Same as AM/DAB mode.
Operating manual (Bluetooth/Handsfree)
- (ACC-ON)
After the ACC-ON, confirm that Toyota screen is displayed.
- The screen is changed to “CAUTION” screen after a few seconds.
Note: It takes a little longer for the first time of ACC-ON.
- Press the “Continue” button on the face panel after a few seconds to move MENU screen.
- Please press the “Setting” button on the face panel to move to Settings screen
- Confirm if ”Settings” screen is displayed, select the ”Bluetooth” button on the display.
- Please press the ”Add Device” button of the screen
- Please press the ”Search Device” button of the screen
- Confirm if screen is changed as below,
Please set iPhone or iPod in pairing mode.
Displays when you have more than one pairing equipment
- Select the iPhone or iPod to connect.
Operate the phone after the message on the screen
- ”Connection Completed” is displayed if completed.
Operating manual (Wi-Fi/Carplay)
- (ACC-ON)
After the ACC-ON, confirm that Toyota screen is displayed.
- The screen is changed to “CAUTION” screen after a few seconds. Note: It takes a little longer for the first time of ACC-ON.
- Press the “Continue” button on the face panel after a few seconds to move MENU screen.
-
Please press the “Setting” button on the face panel to move to Settings screen
-
Confirm that the screen will change to the “Settings” screen, slide it down and select the “Seach Apple CarPlay Device” button on the screen.
-
Please press the ”Search” button of the screen At this time, turn on Bluetooth on the iPhone to be connected.
-
Please Select the connected iPhone.
-
If the display looks like the one below, press the [OK] button on the product side and press [Pairing] on the iPhone side
- Connection is completed when the screen automatically transitions to the CarPlay screen.
FCC Operating manual Requirement
- Co-location: This transmitter must not be co-located or operated in conjunction with anyother antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.CAUTION: Radio Frequency Radiation ExposureThis equipment complies with FCC radiation exposure limits set forth for uncontrolledequipment and meets the FCC radio frequency (RF) Exposure Guidelines.
- This equipmentshould be installed and operated keeping the radiator at least 20cm or more away fromperson’s body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>