Tenveo TEVO-M5B Magi Call Speakerphone User Manual

Tenveo TEVO-M5B Magi Call Speakerphone

Specifications:

• Adjusting function: Mute/Unmute, On/Off
• Pairing : Bluetooth Dongle
• FCC Regulatory Conformance: Part 15 of FCC Rules
• RF Exposure Compliance: FCC Radiation Exposure Limits
• Minimum distance for operation : 20 cm between radiator and body

Product Usage Instructions

Adjusting Function (Mute/Unmute, On/Off):
To mute/unmute the device, press the MUTE button. For turning the device on or off, perform a long press on the same button.

Pairing with Bluetooth Dongle:
To pair the device with a Bluetooth dongle, ensure the dongle is in pairing mode. Then, on the device, navigate to the Bluetooth settings, search for available devices, and select the dongle to establish the connection.

FCC Regulatory Conformance:
Ensure compliance with Part 15 of the FCC Rules by following these guidelines:

• Reorient or relocate the receiving antenna if needed.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a different circuit from the receiver.
• If needed, consult the dealer or a radio/TV technician for assistance.

RF Exposure Compliance:
Follow these guidelines for RF exposure compliance:

• Operate the device with a minimum distance of 20 cm between the radiator and your body.
• Avoid co-locating or operating the transmitter with other antennas or transmitters.

Packing List

USB device

Bluetooth device

Charging

Plug the device into a USB power source. The device lasts for up to 27 hours of talk time and takes approximately 3 hours (PD charging. 5V/8000mA) to fully charge. You can check the battery level from the OLED.

Low battery warning

When battery is lower than 20%, the OLED battery turns red to indicate low power, along with warning tone every 3 minutes.

Button Function

LED Indicator Function

Note : When adjusting the volume, the blue light changes with the volume. The blue progress bar increases / decreases when adjusting the volume. When the volume is turned off, the indicator is red. After the volume is adjusted, the green light will return to on at an interval of 2s.

Connection Introduction

USB Connection

Once connected to your computer, it will automatically power on. It will automatically power off after 10 minutes of inactivity or no source.

Bluetooth Connection

1. When the device is under normal working condition, press to turn on Bluetooth for pairing. The OLED screen display status is
2. Put the mobile device or other devices to be connected in Bluetooth device search mode, select the model of the device. The OLED will display after a successful connection.
3. Each time you power on the device, it will automatically connect with the last successfully connected device if available.
4. To disconnect Bluetooth, please press the Bluetooth button again.

Wireless Connection

Connect to your computer by using a USB Dongle. 2. The OLED screen display when USB dongle is connected.

Headset Connection

Connect to the headset jack using a 3.5mm headset cable. When the headset is connected, the speaker is automatically muted.

Technical Specifications

Warranty

All products purchased from our company are guaranteed to keep in good repair for 36 months. If there are any quality problems during the guarantee period, we will maintain them for free.

Under any of the following conditions, related maintenance costs will be collected:

1. Product was not normally used.
2. Fire, electric shock, outside object collapse or other natural disasters causing the equipment damaged.
3. Unauthorized repair, misuse, abuse or change.

Warranty Card
Thank you very much for choosing our products.

Attention

1. This card is considered as the Protection to fix warranty, so please reserve them carefully. Please fill in truthfully.
2. Please indicate the model number, Factory Serial Number and a detailed description of the fault information.

FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FAQ

Q: What should I do if I experience radio or TV interference?
A: If you experience interference, try reorienting the receiving antenna, increasing distance between devices, connecting to different circuits, or seek assistance from a professional. Unauthorized modifications may void user authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>