Tenveo DC12V HD Conference Camera User Manual

: June 14, 2024
: Tenveo

Table of Contents

Product Description
Packing List
Performance Characteristics
Remote Control Button Description
Camera Menu Setup
Common Operation Instructions
Network Function
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

**Tenveo DC12V HD Conference Camera User Manual

**

Product Description

Front
Product Description
Back

USB Interface Diagram

DC 12V
RS-485
RS-232
IR Receiver
USB

USB+HDMI+RJ45 Interface Diagram

DC 12V
RS-485
RS-232
IR Receiver
USB
HDMI
RJ45

Packing List

HD conference camera

DC 12V power supply

Wall mount

Mounting screws

User manual

Remote control

USB cable

Performance Characteristics

Zoom| 5x digital ZOOM| 3x optical WW1| 10x optical zoom| 20x optical zoom| 10x optical zoom| 12x optical zoom| 20x optical Z00111| 30x optical W0111
---|---|---|---|---|---|---|---|---
Sensor| 1/2.8″SONY CMOS| 1/2.9″HD color CMOS| 1/2.8″SONY CMOS
Effective pixel| 8.29 mega Pot. el| 2.1 mega pixel| 2.38 mega pixel
Video signals| 4K-30/25, 2K30/25, 1080p-30/25| 1080p-30125, 720p-30125| 1080p-60/50/30/25, 1080i-60/50,720p-60/50/30/25
Lens| f=2.2mm| f=3.35 -10,05mm| f=4.9 -47.04mm| f=5.85 S3.6mm| f=4.34 -35.17mm| f=3.85 -46.2mm| f=5.5 -110mm| f=4.7 -141mm
Aperture| F1.8| F1.7-F3.0| F2.36-24| F1.8-F3.9| F1.85-2.63| F2A-F4.0| F1.6-3.5| F1.5-4.0
Horizontal angle| 107°| 99.6°(W)
-30.60(T)| 54.81W) -5.8°M| 55.41W) -3.551T)| 68.8°(W) -&81T)| 73.01W)
-6.971T)| 58.6°(W) -3.6′(T)| 60.51W) -231T)
Vertical| 71°| 53.01W) -172(T)| 41.2°(W)
-4.381T)| 31.61W) -2001T)| 39.51W) -5.1°M| 43.1°(W)
-3.92°(7)| 54.71W) -331T)| 35.11W) -13°(T)
Diagonal angle| 116°| 129.21W) -37.6°M| 67.6°A
-7.151T)| 62.61W)
-4.05°(T)| 77.21W)
-10.1*(7)| 81.1°(N)
-7.99°(T)| 60.21W) -3.r(7)| 69.51W) -2.7°(T)
Video output| USB 2.0| USB,HDMI,RJ45/USB,HDMI,SDI,RJ45
Video encoding format| rsAJPG,| MJPEG/YUY2/H.264
Video resolution| ‘N394021601 etc| 1080P (1920 ‘1080) etc
Signal standard| NTSC/PAL
Preset position| User can set up to 255 presets (IR remote 10 presets)
Control terminal| RS-232,RS485
Shutter| 1/30s-1/10000s, auto
Baud rate| 38400/9600bps
Control protocol| VISCA, PELCO-D, PELCO-P(RS-232, RS485)
USB protocol| UVC1.1
Minimal illumination| 0.1Lux
SNR| 350dB
Horizontal rotation| 3501 + 175°)0.1°/s-100°/s
Vertical rotation| 180°( ± 90°)0.1°/s-80°/s| 120°( + 60°)
0.1°/s-80°/s| 180°( ± 90°)0.1°/s-801s
Power supply| DC 12V/2A
Power consumption| 12W
Work temperature| 00-50°
Work humidity| 0-95% RH
Product size| 247’165’171mm/285’217’197mm(before / after packing)
Product weight (Net/gross weight)| 1.1kg/1.85kg| | 1.15kg/1.9kg1.15kg/1.95kg| 1.25kg/2kg| 1.3kg/2.05kg| 1.4kg/2.15kg| 1.3kg/2.05kg

Remote Control Button Description

No	Name	Function
1	Launch Window	Remote Control Launch Window
2	Power	Enter into Standby mode by pressing
3	PTZ Reset	Reset the PTZ
4	Camera Select Key	Select the camera need to control
5	Position	Preset position setup keys, include [PRESET] and [RESET]Set the

Attentions for Remote Control

Please check whether the indicator corresponding to the camera selection area is on or not.
If the remote control doesn’t work, please replace batteries.
Make sure the Number keys on the camera selection area are consistent with the remote control address in the menu.

When operating remote control, press to enter main menu of the video camera.

Level 1 Menu- Main Menu

Main Menu
— Exposure Color
Image
PITIZ
Information Restore Default Language English
[Home] Enter
[Menu] Back
Language: Support Chinese/English
to enter main menu of the
Click the Home button on the Remote to enter level 2 sub-menu
Click the Menu button on the Remote to exit menu
Level 2 Menu – Exposure

Exposure
– Mode Auto Backlight on/off ExpComp 0~15 Flicker 50/60Hz [Return]

Mode: Auto/Manual
Backlight: On/Off the backlight
Exp Comp: Exposure compensation, optional item is 0 to 15
Flicker: Support 50Hz/60Hz
When changing the exposure mode to Manual, the sub-menu is the following,
Exposure

Common Operation Instructions

Camera Select
Refer to the dial-up at the bottom of the camera and choose camera address number that you want to control (1-4).

Camera Direction Control

Timing up
Turning down
Taming right
Timing to default
Tuming to default

Note: Press the direction key when you need to adjust the angle. If you want to move the camera slowly, just click the direction key; If you want to move the camera fast at a large scale, just long-press the button.
Camera Focusing Mode Control

[AUTO FOCUS] Switch the focus mode to AUTO
[ MANUAL FOCUS] Switch the focus mode to MANUAL
[FAR] Far focus manually Focus
[NEAR] Near focus manually
Camera Zoom Control
Press any one of the 4 [ZOOM] to make the zoom functioning. These 4 keys are not applicable for fixed focus cameras.

Preset Setup, Call, Cancel

Reserve Preset: Press [PRESET], then press one of the numbers (0- 9) to reserve a preset that correspond to the NUMBER.
Note: You can setup 10 presets at most by the remote control.
Call Preset: Press the NUMBER (0-9) directly to call the reserved preset.
Note: It won’t work if there’s no preset reserved in the corresponded number.
Remove Preset: Press [RESET], then press one of the number (0- 9) to remove a preset that corresponds to the NUMBER.

Dial switch setting

SW1

SW2

Dial SW1 (1/2/3/4/5/6/7/8): Camera address code setting
RS-232 Interface Distribution

VISCA RS-232 IN

N.C.
N.C.
TXD
RXD
GND
N.C.
N.C.
N.C.

RS-485 Interface Distribution

Network Function

Operating System: Windows 7/8/10, Mac OS X, Linux, Android Network Protocol: TCP/IP Client PC: P4/128M RAM/40G HDD/ support scaled graphics card, support DirectX 8.0 or more advanced versions.
Equipment installation Connect HD video camera to your internet or your PC via network cable, or connect by Switch/Router.
You can log into the camera’s web interface with the default or modified IP. (Different models have different IP, please check the default IP at the bottom of the camera.)
How to query the IP address of your PC (Note the text in the box)

Windows Settings