KAT KA8 High Power Active Speakers User Manual
- June 26, 2024
- KAT
Table of Contents
KAT KA8 High Power Active Speakers
Specifications:
- Model: KA8
- Power Output: 600W RMS
- Drivers: 8″ low-frequency driver, high-frequency compression driver
- Class: D power
Product Information
The KAT KA8 series speakers are high-performance active speakers featuring loads of class D power. The KA8 features 600 watts of power through one 8″ low-frequency driver and one high-frequency compression driver. The KAT KA8 high-power speakers will satisfy all your performance needs
Controls & Features:
- EQ preset mode: Main/Monitor/Sub/Speech
- Limit LED indicator
- Power LED indicator
- FUSE IEC mains inlet
- Main power switch (on/off)
Usage Instructions:
- Connect the speakers to the power source using the FUSE IEC mains inlet.
- Turn on the main power switch to activate the speakers.
- Select the desired EQ preset mode (Main/Monitor/Sub/Speech) for your audio needs.
- Adjust the volume levels accordingly using your audio source.
- Monitor the Limit LED indicator to avoid overloading the speakers.
Instructions for RF Exposure:
The device complies with RF specifications when used at a distance of 20cm
from the body. Avoid using third-party belt-clips, holsters, or accessories
with metallic components near the device. Use only approved antennas to ensure
compliance with RF exposure requirements.
FCC Warning : This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to certain conditions to prevent interference and ensure proper functioning of the device.
IC Warning :
The information provided aims to make users aware of RF exposure and
guidelines to ensure compliance with FCC exposure limits.
Thank you for your purchase!
FAQ :
- Q: How do I reset the EQ presets?
A: To reset the EQ presets, turn off the speakers, wait for a few seconds, and then turn them back on. The EQ presets will be reset to default settings.
CONTROLS & FEATURES
CONTROLS & FEATURES
- Bluetooth® pairing button
- Link Button
- IN1 Channel gain control knob
- IN1 Channel mic/line input toggle button
- IN1 Channel input combo socket
- IN2 Channel mic/line input toggle button
- IN2 Channel gain control knob
- IN2 Channel input combo socket
- Line out
- Master volume: click to enter the EQ preset mode-Main/Monitor/Sub/Speech
- Limit LED indicator
- Power LED indicator
- FUSE IEC mains inlet
- Main power switch (on/off)
INSTRUCTIONS
- Prior to switching on, turn volume down to minimum.
- Connect the audio source to the appropriate Input socket.
- Connect to the mains supply.
- Switch on the audio source, followed by the active speaker.
- Set the volume with the applicable control.
BLUETOOTH® PAIRING INSTRUCTIONS
- Press and hold the PAIR button until light flashes quickly.
- Pairing connection can now be made via Bluetooth® on devices such as smart phones and tablets.
- To temporarily bypass Bluetooth® connection press PAIR button once until light flashes slowly. Press again once to reconnect.
- To exit/disable Bluetooth® press and hold PAIR button until light turns off.
SAFETY REMINDER
- Intended for Indoor or protected from weather use only.
- Do not place near open flame.
- Make sure unit is stable. Place on a flat surface or an appropriate speaker stand with wide footprint able to hold 25 lbs. or greater.
- Do not place liquids on top of unit or subject to high humidity.
- No user serviceable parts inside. Always refer to a qualified repair service when service is required.
- Mind the system Clip Indicator. Keeping the volume to a level that keeps the Clip Indicator only blinking when a large amount of bass is present will deliver a better listening experience and prolong the life of the unit.
TECHNICAL SPECIFICATIONS
KA8
- Power – 600 Watts
- Speaker(s) – 1×8”
- Frequency Response – 40-20 Khz
- Presets – 4 Mode DSP EQ presets
- Bluetooth® – Yes
- Linking capability – BT & TWS Function
- Cabinet – Plastic
HIGH POWER ACTIVE SPEAKERS
- POWERED SPEAKERS WITH BLUETOOTH®
- The KAT KA8 series speakers are high performance active speakers featuring loads of class D power. The KA8 features 600 watts of power through one 8” low-frequency driver and one high frequency compression driver.
- Each features four modes of onboard DSP EQ presets and up to three channels of audio input including Bluetooth® audio streaming.
- The XLR thru allows performers to enhance their sound by connecting to other powered speakers for system expansion. You can also connect with another KAT KA series speaker (Bluetooth® only) for even more expandability. The portable design & standard speaker pole mount make for an easy setup and breakdown.
- The KAT KA8 high power speakers will satisfy all your performance needs.
FCC
Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body
IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. The device complies with RF specifications when the device used at 20cm from the body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
All Rights Reserved Copyright© 2023 KAT