DITEK DTK-HVACKIT HAVC System Surge Protection Kit Owner’s Manual

June 22, 2024
DITEK

DTK-HVACKIT HAVC System Surge Protection Kit

DTK-HVACKIT-HAVC-System-Surge-Protection-Kit-
PRODUCT

Product Information

Specifications

  • Part Number: DTK-120/240CM+
  • Service Voltage: 120/240VAC
  • MCOV: 150/320VAC
  • Protection Modes: L-G, L-L
  • Voltage Protection Rating: 700V L-G, 1,200V L-L
  • Surge Current Rating: 50,000A
  • SCCR: 100,000A
  • Nominal Discharge Current Rating (In): 10kA
  • Operation Frequency: 50/60Hz

DITEK’s HVAC Surge Protection Ki t is perfect for commercial and residential HVAC installers who want to provide an additional, valuable service to their customers. Power outages, surges and voltage transients can damage your heating and cooling system just like any other valuable electronic device. DITEK’s top quality, superior performing products help prevent equipment loss during these damaging events

Product Usage Instructions

DTK-120/240CM+: Condensing Unit Surge Protector

  1. Install and wire to the load side of the disconnect.
  2. Make a parallel connection for easy installation.
  3. Diagnostic LED indicates power, ground presence, and surge protection status.
  4. Automatically resets to handle multiple surge events.

DTK-4LVLPLV: Thermostat Surge Protector

  1. Install in series with the thermostat control wires at the air handler.
  2. Series connection, parallel function adds no resistance to loop circuits.

**Product Features

**

120/240CM+: Condensing Unit Surge Protector

  • 120/240V single phase surge protective device
  • NEMA 4X weatherproof enclosure
  • Install and wire to the load side of the disconnect
  • Parallel connection for easy installation
  • Diagnostic LED indicates power, ground presence and surge protection status
  • Automatically resets to handle multiple surge events

DTK-4LVLPLV: Thermostat Surge Protector

  • 4-pair, 24V Surge Protection
  • Install in series with the thermostat control wires at air handler
  • Series connection, parallel function adds no resistance to loop circuits

Applications

  • Heating & Air Conditioning Systems

DTK-HVACKIT-HAVC-System-Surge-Protection-Kit-
FIG-1

FAQ

Q: What is the warranty for DITEK’s HVAC Surge Protection Kit?
A: DITEK offers a 10 Year Limited Warranty for their surge protection products.

Q: How do I know if the surge protector is working?
A: The diagnostic LED on the DTK-120/240CM+ unit indicates power, ground presence, and surge protection status. If the LED is functioning properly, the surge protector is operational.

Q: Can the DTK-4LVLPLV be used with any thermostat?
A: The DTK-4LVLPLV is designed for use with 24V thermostats. Make sure your thermostat operates at this voltage before installation.

DITEK Surge Protection, Largo, FL 33771
Sales: 800-753-2345
www.diteksurgeprotection.com
SPS-100034-005 Rev 5 11/23

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals