ASUS ExpertWiFi EBG15 Gigabit VPN Router User Guide
- June 13, 2024
- Asus
Table of Contents
ASUS ExpertWiFi EBG15 Gigabit VPN Router
Router Overview
- Power LED
- USB 3.2 Gen 1 LED
- Reset button
- USB 3.2 Gen 1 port
- WAN (Internet) port
- WAN/LAN ports
- LAN ports
- Power (DCIN) port
DC Power adapter | DC Output: +12V with max 1.5A DC:+12V 1.5A |
---|---|
Operating Temperature | 0~40oC |
Operating Humidity | 50~90% |
LED Indicators / LED
Speed LED (Green)| Link/Act LED (Amber)
1G| ON| 1G/100M/10M| Blinking
100M/10M| OFF| No Traffic| ON
INSTALLATION
- Reboot the modem and ensure its connection is ready
- Prepare your ASUS router and power it on
- [App] Scan the code and download the ASUS ExpertWiFi app for setup
- [Web] Open a web browser and navigate to http://expertwifi.net. for web setup
Support Wall Mount
- IMPORTANT! DO NOT mount this equipment higher than 2 meters.
- NOTE: It is recommended to use screws with a size of PA5.7*2mm.
FCC
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm. for the detailed recycling
information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products on the ASUS REACH website at
http://csr.asus.com/english/REACH.htm.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Caution Statement
WARNING: Any changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
WARNING! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions to satisfy RF exposure compliance.
To maintain compliance with FCC exposure compliance requirements, please
follow operation instructions as documented in this manual.
WARNING! This equipment must be installed and operated in accordance with
the provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with the Innovation, Science and Economic Development
Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)
Q22322EBG15(US+TW)_180x208mm_QSG_Card.indd 1 2023/9/22 9:41:30
For detailed information. please https://asus.dickExperty/FiEBG15.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>